Avanti AT480 Owner's Manual

Owner’s Manual

AT480 TREADMILL

CAUTION! Read all precau-tions and instructions in this

manual before using this equipment.

Important Safety Information

WARNING! Before using this treadmill or starting any exercise

program, consult your physician. This is especially important for

persons over the age of 35 and/or persons with pre-existing health

problems. The manufacturer or distributor assumes no

responsibility for personal injury or property damage sustained by

or through the use of this product.

WARNING! To reduce the risk of electrical shock, burns, fire, or

other possible injuries to the user, it is important to review this

manual and the following precautions before operation.

SAFETY PRECAUTIONS AND TIPS

1、It is the owner's responsibility to ensure that all users of this

treadmill have read the Owner's Manual and are familiar with

warnings and safety precautions.

2、This treadmill has a user maximum capacity of 275 pounds.

3、The treadmill should only be used on a level surface and is

intended for indoor use only. The treadmill should not be placed

in a garage, patio, or near water and should never be used

while you are wet. Recommends a treadmill mat be placed

under the treadmill to protect floor or carpet and for easier

cleaning.

4、Follow safety information in regards to plugging in your treadmill.

Keep the power cord away from the incline wheels and do not

run the power cord underneath your treadmill. Do not operate

the treadmill with a damaged or frayed power cord.

5、Wear comfortable, good-quality walking or running shoes and

appropriate clothing. Do not use the tread-mill with bare feet,

sandals, socks or stockings.

6、Always straddle the belt and allow it to start moving before

stepping onto the belt.

7、Hold on to handrail when adjusting speed, incline, or other

controls.

8、Always examine your treadmill before using to ensure all parts

are in working order.

9、Allow the belt to fully stop before dismounting.

10、Pets should never be allowed near or on the treadmill.

11、Do not leave children unsupervised near or on the treadmill.

12、Never operate the treadmill where oxygen is being

administered, or where aerosol products are being used.

13、Never insert any object or body parts into any opening.

14、For safety and to prevent damage to your treadmill, no more

than one person should use the treadmill at a time.

15、Always unplug the treadmill before cleaning and/or servicing.

Service to your treadmill should only be performed by an

authorized service representative, unless authorized and/or

instructed by the manufacturer.

16、Failure to follow these instructions will void the treadmill

warranty.

Before You Start

Thank you for purchasing the AT480 TREADMILL! Before you start,

please read the Owner's Manual and become familiar with the

operation of your new treadmill.Remember to take the time to

perform the stretching exercises provided to avoid injury.Do not

stand on the walking belt while pressing the Power button or

Start/Stop button. Always adjust the speed of the treadmill in small

increments as this treadmill is capable of high speeds.If you are

taking medication, consult your physician to see if the medication

will affect your exercise heart rate. If you have heart problems, or

are over the age of 35 years, do not use the pre-set treadmill

programs or start an exercise program without first contacting and

receiving approval from your physician.To avoid the risk of

electrical shock, always keep the console dry. Do not spill liquids on

the console. Recommends a sealed water bottle for beverages

consumed while using the treadmill.Please review the following

drawing below to familiarize yourself with the listed parts. This

manual covers several treadmills, so the one pictured below may

not be identical to your particular model.

Assembly

The AT480 Treadmill will require assembly before operating. After

opening the box, remove any packing material from the treadmill.

Do not throw away any packing materials until the unit is working

properly.

Place the base on a clean, level surface. Make sure the electrical

cord will easily reach an electrical outlet.

Locate the hardware pack and identify the following parts required

for assembly.

Parts List：

1.Owner's Manual

2、Base Assembly

3、Console Assembly

4、Left and Right Fender

5、Safety Key (Reed Switch)

6、Allen Wrench

7、Philip Screw M6×12 (Qty. 2)

8、Philip Screw M6×30 (Qty. 2)

9、Allen Bolt M8×15 (Qty. 10)

10. Allen Bolt M8×55 (Qty. 6)

11、Washer Φ9×Φ22×2 (Qty. 16)

12. Washer Φ6.6×Φ12×1.6 (Qty. 4)

Moving Instructions

CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT