Page 1
IMPERIO
MINI LINE ARRAY
SYSTEM
Avante Audio’s Imperio mini line
array system is a great fit for small
to mid-size venues. The Imperio
system consists of the Imperio Sub,
a 10-inch, 400W Subwoofer with
a Class D digital amplifier, and the
Imperio, a cabinet with dual 4.75-inch
woofers, 6 x 1.75 inch IDVAT high
frequency drivers, a 240W Class D
power amplifier and 24-bit DSP.
The system may be configured in
a variety of ways with multiple
Imperio Subs and eight Imperio
cabinets linked together with the
sub on top or bottom. All items
including the flybar are sold
separately to allow for maximum
customizability and versatility.
Page 2
IMPERIO
SKU IMP092
AS8
AMPLIFIER:
• 240W Class RMS D Amplifier Module
• Switching Power Design
• LED Power / Signal / Clip Indicator
• 24-bit DSP Selectable Configurations
• Input: 1x 3pin XLR / powerCON (NAC3FCA)
• Output: 1x 3pin XLR powerCON (NAC3FCB)
• Volume: Selectable Input Sensitivity Dial
• Power Input: 100-240V ~ 50/60Hz
SPEAKER:
SKU IMP092
SKU IMP400
IDVAT
HF DRIVERS
• 2x 4.75” Neodymium Woofers with 1-inch voice coil
• 6x 1.75” IDVAT HF drivers
(Inverted Dome Vertical Array Technology)
• Type: 2-Way Active Closed Design
• Frequency Response: 150Hz – 20KHz
• Max Output SPL: 117dB
(single box measured on Axis @1m)
• Selectable Input Sensitivity:
-3dB, 0dB, 3dB, 6dB
• Cabinet: ABS Plastic
• Grill: 1.0mm steel
• Splay Angles: 0, 4, 8, & 12-degrees
• Integrated Rigging: Yes
• Dispersion Angle: 90-degree x 15-degree
• Dimensions (LxWxH):
7.3”x8.8”x12.8” / 184.8x224x324mm
• Weight: 14 lbs. / 6.3 kg.
www.avanteaudio.com/imperio
Page 3
IMPERIO SUB
SKU IMP400
AMPLIFIER:
• 400 watts RMS, Class D Power Amp, 800 watts Peak Power
• 100-120V / 220-240V ~ 50/60Hz (country specific)
• LED Power / Signal / Clip Indicator
• Input: 1x 3pin XLR powerCon (NAC3FCA)
• Output: 1x 3pin XLR powerCon (NAC3FCB)
• Phase Switchable (0 / 180)
• Internal Selectable X-Over 90Hz or 120Hz)
• Volume Control Dial
DRIVER:
• 1x 10” Woofer w/2.5” Voice Coil
• 123dB (at max output)
• Plywood Cabinet, black finish
• 6th Order Bandpass Design
• M20 Screw Pole Mount
• 1.2mm Steel Grill
• Dimensions: L 13.8” x D 18.3” x H 20.7”
• Weight 49.6 lbs.
www.avanteaudio.com/imperio-sub
GROUND
STACK
CONFIGURATION
Page 4
ACCESSORIES
@avanteaudio
IMPERIO POLE
SKU IMP194
Use the Imperio Pole, along with the Sub and two of the Imperio Loudspeakers to
create “Imperio System One”. Great for small to medium events. The Imperio Pole
can be broken down into two pieces for dierent height selections, and easy
transport. It also includes an adapter to secure the Imperio modules.
The Imperio Pole uses an M20 thread to connect to the Sub.
IMPERIO LINK PINS
SKU IMP340
Always good to have extra pins on hand.
The Imperio Link Pins are sold in sets of four.
IMPERIO FLYBAR SM
SKU IMP496
Fly up to 8 Imperio loudspeaker modules using the Imperio Flybar SM.
*Note: Not to be used to fly subwoofers.
IMPERIO FLYBAR LG
SKU IMP265
Use two of the Imperio Flybar LG to fly an Imperio Sub and eight of the Imperio
loudspeaker modules underneath. You can also use one of the Flybar LG’s to create
a ground stack.
IMPERIO
MINI LINE ARRAY SYSTEM
ALSO AVAILABLE IN WHITE
DISCLAIMER
The data and specifications in this brochure are intended to be used for reference purposes only.
Avante does not assume responsibility for user error or omissions.
Overhead rigging of speakers may require an engineering analysis in order to fulfill all safety
requirements and comply with all governing codes.
All data and specifications are subject to change without notice.
www.avanteaudio.com
Loading...