Avanity SVE470CW, SVE510CW Installation Manual

INSTALLATION INSTRUCTIONS

STONE

VESSEL SINK

(ALL MODELS)

YOUR STONE VESSEL SINK

All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn or a grid drain
assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.

BEFORE YOU BEGIN

Observe all local plumbing and building codes.
Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your
installation.
Before installation, remove your new stone sink and carefully inspect it for damage. Return the stone sink to its packaging until

you are ready to install it.

These instructions contain important care and cleaning instructions. Please review these instructions carefully.

SUGGESTED TOOLS AND MATERIALS

10'

Adjustable Wrench Channel Lock Tape Measure Safety Glasses

ABOVE COUNTER INSTALLATION

STEP 1:

Carefully, position the sink in the cutout opening.

STEP 2:

Use moderate force and hand-tighten the drain kit to the sink, to secure it on the counter-top.

STEP 3:

Install the faucet according to the manufacturer’s instructions/manual.

CARE INSTRUCTIONS

To keep your new sink looking new, please follow these simple care instructions:

Routine cleaning of the stone sink will reduce the need for heavy cleaning and polishing.
Use a squeegee after each use to minimize soap scum.
Never use strong / abrasive cleaner. Clean your stone sink with water and a soft, clean cloth. Do not use abrasive detergents or
cleaning pads, which can damage the surface of the stone.
Seal your stone sink before its first use and then regularly as warranted by use. Refer to the instructions on the stone sealer container
for proper application.

For customer sup po rt p leas e call 626 4 04 7878 wee kday s 8: 00 t o 5: 00 EST o r fa x 86 6 235 565 6 an y time