Page 1
CHINA UNDERMOUNT SINK
SUGGESTED TOOLS AND MATERIALS
10'
Philips Screwdriver Sealant Tape Measure Safety Glasses
PARTS / HARDWARE (INCLUDED ONLY WITH AVANITY STONE TOPS)
INSTALLATION INSTRUCTIONS
SINK INSTALLATION
1
Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.
3
120003
4x 4x
120004
500001
4x
111212
4x
2
Turn the stone top upside down and place it on a clean,
scratch resistant surface. Center the sink over the cutout.
Secure the sink to the top using the mounting kit / hardware provided with the stone top, HAND TIGHTEN ONLY.
CARE AND CLEANING
For best results in caring for your vitreous china lavatory, we suggest:
- Always wipe off spills immediately.
- Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to the entire surface.
- Wipe surfaces clean, immediately after applying cleaner.
- Do not allow cleaner to sit or soak. Never let cleaners sit on the surface of the vitreous china for long periods of time.
- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean surfaces.
They will scratch the surface of the vitreous china lavatory.
- Always rinse and wipe clean the fixtures to prevent soap buildup.
Fo r cu st om er s up po rt p le as e ca ll 6 26 4 04 7 87 8 we ek da ys 8 :0 0 to 5 :0 0 ES T or f ax 8 66 2 35 5 656 a ny t im e
Loading...