Part No. E20171203A0R
WG 10”/12” Series
10.4”/12.1” Multifunctional Touch Panel PC
Quick Reference Guide
Copyright Notice
Copyright © 2007-2009 Technology Inc., ALL RIGHTS RESERVED.
WG 10”/12” Series
2 WG 10”/12” Series Quick Reference Guide
Contents
1. Getting Started ........................................................................................................3
1.1 Safety Precautions....................................................................................................3
1.2 Packing List...............................................................................................................3
1.3 System Specifications...............................................................................................4
1.4 System Overview......................................................................................................8
1.4.1 Front View................................................................................................................................ 8
1.4.2 Rear View................................................................................................................................ 8
1.5 System Dimensions ..................................................................................................9
1.5.1 WG-1201/1203 Front side and rear........................................................................................ 9
1.5.2 WG-1001/1003 Front side and rear...................................................................................... 10
1.5.3 Bottom and Rear ................................................................................................................... 11
2. Hardware Configuration ....................................................................................... 12
2.1 Jumper and Connector Setting , Driver and BIOS Installing ...................................13
2.2 Installing Hard Disk & Memory................................................................................14
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
3
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
z 1 x WG 10"/12" Series Panel PC
z 1 x Quick Reference Guide
z 1 x DVD-ROM contains the followings:
— User’s Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Audio drivers and utilities
— WiFi drivers and utilities
— Touch controller drivers and utilities
z 1 x Power Adapter
z 1 x Stand for Panel PC (optional)
WG 10”/12” Series
4 WG 10”/12” Series Quick Reference Guide
1.3 System Specifications
Panel
Model
WG-1201 WG-1001
LCD size
12.1”, 4:3 10.4”, 4:3
Display type
SVGA XGA SVGA XGA
Resolution
800 x 600 1024 x 768 800 x 600 1024 x 768
Color
262K 262K 262K 262K
Pixel pitch
0.3075mm(H) x
0.3075mm(V)
0.240mm(H) x
0.240mm(V)
0.264mm(H) x
0.264mm(V)
0.20625mm(H) x
0.20625mm(V)
Luminance
450 cd/m² 450 cd/m² 230 cd/m² 300 cd/m²
Contrast ratio
1000 700 500 500
Viewing angle
89(U), 89(D),
89(L), 89(R)
80(U), 80(D),
80(L), 80(R)
55(U), 65(D),
70(L), 70(R)
60(U), 60(D),
70(L), 70(R)
Response time
25 ms 25 ms 25 ms 25 ms
Backlight
CCFL CCFL CCFL CCFL
Touch type
5 Wires resistive 5 Wires resistive 4 Wires resistive 5 Wires resistive
Touch interface
USB USB
System
Board
EBM-CX700
CPU
Onboard VIA Eden ULV 1GHz (3.5W), up to 1.6GHz (8W) CPU
BIOS Award, 512KB Flash BIOS
System Chipset VIA CX700M
I/O Chipset VIA VT1211
System Memory One 200-pin DDR2 SODIMM socket, supports up to 1GB DDR2 400/533 SDRAM
SSD One CF socket supports Type I / II Compact Flash Card.
HDD Optional 2.5” SATA HDD or 44-pin enhanced IDE HDD
WiFi Optional USB WiFi 802.11b/g
Watchdog Timer Reset: 1 ~ 65535 sec./min. and 1 min./step
Display VIA CX700M
Audio VIA VT1708A supports 2CH Audio
Ethernet
Dual RTL8110SC Gigabit LAN/10/100/1000 Base-Tx Fast Ethernet compatible
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
5
External I/O Ports
COM Port
1 x RS-232
Ethernet Port
Dual RTL8110SC Giga LAN
VGA / LCD Port
1 x DB-15
Audio Port
Line-out
USB Port
2 x USB 2.0
Power Supply Unit
Power Input
12V
Power Output
5A (60W)
Environment & Mechanical
Operating Temperature
-10~60°C (14~140°F) 0~40°C (32~104°F)
Storage Temperature
-20 to +75°C (-4~167°F) -20 to +75°C (-4~167°F)
Relative Humidity
5 to 90% @ 40°C (104°F), relative humidity, non-condensing
Dimension (W x D x H)
283 x 222x 45 mm 259 x 196 x 41mm
Weight
2.84 Kgs 2.11 Kgs
Mounting
Desktop (VESA Compliance)
WG 10”/12” Series
6 WG 10”/12” Series Quick Reference Guide
Panel
Model
WG-1203 WG-1003
LCD size
12.1”, 4:3 10.4”, 4:3
Display type
SVGA XGA SVGA XGA
Resolution
800 x 600 1024 x 768 800 x 600 1024 x 768
Color
262K 262K 262K 262K
Pixel pitch
0.3075mm(H) x
0.3075mm(V)
0.240mm(H) x
0.240mm(V)
0.264mm(H) x
0.264mm(V)
0.20625mm(H) x
0.20625mm(V)
Luminance
450 cd/m² 450 cd/m² 230 cd/m² 300 cd/m²
Contrast ratio
1000 700 500 500
Viewing angle
89(U), 89(D),
89(L), 89(R)
80(U), 80(D),
80(L), 80(R)
55(U), 65(D),
70(L), 70(R)
60(U), 60(D),
70(L), 70(R)
Response time
25 ms 25 ms 25 ms 25 ms
Backlight
CCFL CCFL CCFL CCFL
Touch type
5 Wires resistive 5 Wires resistive 4 Wires resistive 5 Wires resistive
Touch interface
USB USB
System
Board
EBM-945GSE
CPU
Onboard Intel Atom N270 1.6GHz (2.5W)
BIOS Award 4 Mbit Flash BIOS
System Chipset Intel 945GSE + ICH7-M
I/O Chipset ITE 8712F
System Memory Onboard 1GB DDR2, extra one SODIMM supports up to 2GB 400/533 SDRAM
SSD One CF socket supports Type I / II Compact Flash Card.
HDD Optional 2.5” SATA HDD or 44-pin enhanced IDE HDD
WiFi Optional USB WiFi 802.11b/g
Watchdog Timer Reset: 1 ~ 65535 sec./min. and 1 min./step
Display Intel 945GSE GMCH integrated GMA950 graphics
Audio Realtek ALC 655 supports 5.1-CH Audio
Ethernet
Dual Realtek RTL8111C Gigabit LAN, supports wake on LAN
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
7
External I/O Ports
COM Port
1 x RS-232/422/485 setting by BIOS*, optional extra 1 x RS-232/422/485
Ethernet Port
Dual RTL8111C Giga LAN
VGA / LCD Port
1 x DB-15
Audio Port
Line-out
USB Port
2 x USB 2.0
Power Supply Unit
Power Input
12V
Power Output
5A (60W)
Environment & Mechanical
Operating Temperature
0~60°C (32~140°F) 0~40°C (32~104°F)
Storage Temperature
-20 to +75°C (-4~167°F) -20 to +75°C (-4~167°F)
Relative Humidity
5 to 90% @ 40°C (104°F), relative humidity, non-condensing
Dimension (W x D x H)
283 x 222x 45 mm 259 x 196 x 41mm
Weight
2.84 Kgs 2.11 Kgs
Mounting
Desktop (VESA Compliance)
Note: *To know more detail of RS232/422/485 setting by BIOS, please refer to chapter 2.1.
WG 10”/12” Series
8 WG 10”/12” Series Quick Reference Guide
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
Connectors
Label Function Note
POWER
Power on button
CF
CF Type I/II Socket with Ejector Optional for 2nd COM port
COM
Serial port DB-9 male connector
LINE OUT
Line-out audio jack
USB
2 x USB 2.0 connector Dock USB
LAN1
RJ-45 Ethernet connector 1
LAN2
(KB/MS)
RJ-45 Ethernet connector 2
(LAN2 is default, KB/MS is optional)
HDD
HDD indicator
PWR
System power indicator
VGA
CRT connector DB-15 female connector
RESET
Reset button
DC-IN
DC Power-in connector
POWER
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
9
1.5 System Dimensions
1.5.1 WG-1201/1203 Front side and rear
WG 10”/12” Series
10 WG 10”/12” Series Quick Reference Guide
1.5.2 WG-1001/1003 Front side and rear
(Unit: mm)
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
11
1.5.3 Bottom and Rear
Note: The M3*3 screw holes are reserved for WG Series Panel Mount Brackets. Improper usage
may harm the mechanical parts.
M3*3
WG 10”/12” Series
12 WG 10”/12” Series Quick Reference Guide
2. Hardware
Configuration
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
13
2.1 Jumper and Connector Setting , Driver and BIOS Installing
2.1.1 WG-1003/1203 RS232/422/485 setting by BIOS
The COM port setting of WG-1003/1203, which applying EBM-945GSE M/B, can be
configured by BIOS. The path is shown as below.
[BIOS Menu] Æ [Integrated Peripherals] Æ [Super IO Device]
Æ [COMPORT 232/422/485]
The panel backlight of WG-1003/1203, which applying EBM-945GSE M/B, can be
configured by BIOS as well. The path is shown as below.
[BIOS Menu] Æ [Advanced Chipset Features] Æ [LVDS Back Light]
To know more about other settings, please refer to EBM-CX700, EBM-945GSE Quick
Installation Guide or User’s Manual.
WG 10”/12” Series
14 WG 10”/12” Series Quick Reference Guide
2.2 Installing Hard Disk & Memory
Step 1. Unfasten 6 screws from the case. Then take off the top chassis.
Step 2. Insert the SODIMM into the memory socket.
Quick Reference Guide
WG 10”/12” Series Quick Reference Guide
15
Step 3-1. HDD Installation: Insert the cable to connect the HDD and the SATA connecter.
Step 3-2. SATA HDD Installation: By default, the SATA cables had been inserted to the
according connectors. Just connect to SATA HDD with the two cables.
IDE Connector
SATA Connector
SATA wire
SATA cable
WG 10”/12” Series
16 WG 10”/12” Series Quick Reference Guide
Step 3-3. Insert the HDD into the Drive Bay. Remember to place the HDD down to the
bottom exactly in order to screw the device tightly.
Step 4. Place back the chassis with 6 screws locked.
HDD
Loading...