
LPC 15” Series
15” Multifunctional Touch Panel PC
Quick Reference Guide
Copyright 2007-2011 Avalue Technology Inc., ALL RIGHTS RESERVED.

LPC 15” Series
2 LPC 15” Series Quick Reference Guide
Contents
1. Getting Started ........................................................................................................ 3
1.1 Safety Precautions .................................................................................................... 3
1.2 Packing List ............................................................................................................... 3
1.3 System Specifications ............................................................................................... 4
1.4 System Overview ...................................................................................................... 6
1.4.1 Front View ................................................................................................................................ 6
1.4.2 Rear View ................................................................................................................................ 6
1.5 System Dimensions .................................................................................................. 7
2. Hardware Configuration ......................................................................................... 8
2.1 COM port BIOS Setting ............................................................................................. 9
2.1.1 LPC-1503 RS232/422/485 setting by BIOS .......................................................................... 9
2.1.2 LPC-1505 RS232/422/485 setting by SW2 .......................................................................... 9
2.2 Installing Hard Disk & Memory ................................................................................ 10

Quick Reference Guide
LPC 15” Series Quick Reference Guide
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1 x LPC 15" Series Panel PC
1 x Quick Reference Guide
1 x DVD-ROM contains the followings:
— User’s Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Au dio drivers and utilities
— WiFi drivers and utilities
— Touch controller drivers and utilities
1 x Power Adapter

LPC 15” Series
4 LPC 15” Series Quick Reference Guide
1.3 System Specifications
65(U), 60(D), 70(L), 70(R)
Onboard Intel Atom N270 1.6GHz
Onboard Intel Pineview D525 1.8GHz
Onboard 1GB DDR2and one SODIMM
supports up to 2GB
Onboard 1GB DDR3 and one SODIMM
supports up to 3GB
One CF socket supports Type I / II Compact Flash Card.
Optional USB WiFi 802.11b/g
Reset: 1 ~ 65535 sec./min. and 1 min./step
Realtek ALC 892 supports 5.1-CH Audio
Realtek ALC888 supports 5.1-CH Audio
Dual Realtek RTL8111C Gigabit LAN,
supports wake on LAN
Intel® 82574L Gigabit LAN, Optional
Dual LAN

Quick Reference Guide
LPC 15” Series Quick Reference Guide
1 x RS-232/422/485 setting by BIOS*,
optional extra 1 x RS-232/422/485
1 x RS-232/422/485 setting by SW2*,
optional extra 1 x RS-232/422/485
Intel® 82574L Gigabit LAN
5 to 90% @ 40°C (104°F), relative humidity, non-condensing
Desktop (VESA Compliance)
Note: *To know more detail of RS232/422/485 setting, please refer to chapter 2.1.

LPC 15” Series
6 LPC 15” Series Quick Reference Guide
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
CF Type I/II Socket with Ejector
Optional for 2nd COM port
RJ-45 Ethernet connector 1
LPC-1505 -- PS/2 connector
LPC-1503 -- LAN2

Quick Reference Guide
LPC 15” Series Quick Reference Guide

LPC 15” Series
8 LPC 15” Series Quick Reference Guide
2. Hardware
Configuration
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

Quick Reference Guide
LPC 15” Series Quick Reference Guide
2.1 COM port BIOS Setting
2.1.1 LPC-1503 RS232/422/485 setting by BIOS
The COM port setting of LPC-1503, which applying EBM-945GSE M/B, can be configured
by BIOS. The path is shown as below.
[BIOS Menu] [Integrated Peripherals] [Super IO Device]
[COMPORT 232/422/485]
The panel backlight of LPC-1503, which applying EBM-945GSE M/B, can be configured by
BIOS as well. The path is shown as below.
[BIOS Menu] [Advanced Chipset Features] [LVDS Back Light]
To know more about other settings, please refer to EBM-945GSE Quick Installation Guide
or User’s Manual.
2.1.2 LPC-1505 RS232/422/485 setting by SW2
The COM port setting of LPC-1505, which applying EBM-PNV M/B, can be configured by
SW2. Please refer to EBM-945PNV Quick Installation Guide or User’s Manual.

LPC 15” Series
10 LPC 15” Series Quick Reference Guide
2.2 Installing Hard Disk & Memory
Step 1. Memory Installation: Unfasten 6 screws from the case to take off the top chassis.
Step 2. Insert the SODIMM into the memory socket.
Step 3-1. HDD Installation: Unfasten 2 screws of the HDD bracket and take it off.

Quick Reference Guide
LPC 15” Series Quick Reference Guide
Step 3-2. Insert the HDD into the bracket and fasten 4 screws.
Step 3-3. Insert the cable to connect the HDD and the SATA connecter.
Step 3-4. SATA HDD Installation: By default, the SATA cables had been inserted to the
according connectors. Just connect to SATA HDD with the two cables.

LPC 15” Series
12 LPC 15” Series Quick Reference Guide
Step 3-5. Insert the HDD back and fasten 2 screws.
Step 4. Place back the chassis with 6 screws locked.