Avalue Technology LPC-08A1, LPC-0803 Quick Reference Manual

Part No. E201708A1A1R
LPC-08 Series
8” Multi-functional Touch Panel PC
Quick Reference Guide
2nd Ed – May 2010
Copyright Notice
Copyright © 2010 Avalue Technology Inc., ALL RIGHTS RESERVED.
LPC-08 Series
2 LPC-08 Series Quick Reference Guide
Contents
1. Getting Started............................................................................................................3
1.1 Safety Precautions ................................................................................................3
1.2 Packing List...........................................................................................................3
1.3 System Specifications ...........................................................................................4
1.4 System Overview...................................................................................................6
1.4.1 Rear View..................................................................................................................................... 6
1.4.2 Right View....................................................................................................................................6
1.5 System Dimensions...............................................................................................7
1.5.1 LPC-08 Series.............................................................................................................................. 7
2. Hardware Configuration.............................................................................................8
2.1 Jumper and Connector Setting, Driver and BIOS Installing...................................8
2.2 Installing Memory ..................................................................................................9
2.3 Installing CF Card................................................................................................10
2.4 Installing Hard Disk..............................................................................................11
Quick Reference Guide
LPC-08 Series Quick Reference Guide
3
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.
1.2 Packing List
z 1 x LPC-08 Series Panel PC z 1 x Quick Reference Guide z 1 x CD/DVD-ROM contains the followings:
User’s Manual (this manual in PDF file) Ethernet driver and utilities VGA drivers and utilities Audio drivers and utilities WiFi drivers and utilities Touch controller drivers and utilities
z 1 x Power Adapter z 4 x screws for VESA
LPC-08 Series
4 LPC-08 Series Quick Reference Guide
1.3 System Specifications
Panel
Specifications
LPC-08A1 LPC-0803
LCD size
8"
Display type
SVGA TFT
Resolution
800 x 600
Color
262K
Pixel pitch
0.2025mm(H) x 0.2025mm(V)
Luminance
400 cd/m²
Contrast ratio
500
Viewing angle
55(U), 65(D), 65(L), 65(R)
Response time
50 ms
Backlight
LED
Touch Type
5-wire Resistive
Touch Light Transmission
80%
Touch Interface
USB onboard touch interface USB
System
Board
ECM-LX800D ECM-945GSE
CPU
Onboard AMD Geode LX800 @ 0.9
W 500 MHz with 128K L2 cache
Intel® Atom processor N270 1.6GHz
CPU
Cooling Method
Passive CPU heatsink
System Chipset
AMD Geode LX800/CS5536 Intel® 945GSE / ICH7-M
I/O Chip
Winbond W83627HG-AW ITE IT8712F
Memory
Onboard 512MB DDR Memory
One 200-pin SODIMM socket
supports up to 2GB DDR2
400/533MHz SDRAM
SSD
One CF socket by IDE secondary slave channel
supports Type I / II Compact Flash Card
Optional one 2.5” HDD w/shock-resistant drive bay
WiFi
Optional USB WiFi 802.11 b/g
(occupy one USB port)
Optional USB WiFi 802.11 b/g
Quick Reference Guide
LPC-08 Series Quick Reference Guide
5
Rear Panel I/O
Serial Port 1 x RS-232, Optional 1 x RS-232/422/485
Ethernet Dual Realtek RTL8101L LAN Dual Marvell 88E8053 GigaLAN
VGA 1 x DB-15
Audio port 1 x Line out
USB 2 x USB 2.0 4 x USB 2.0
Mouse & KB 1 x PS/2 Keyboard connector N / A
Mechanical & Environmental
Color
Front Silver and Back Black
Power Input
100~250 Vdc/ 47~63 Hz
Power Output
+12 Vdc / 5 A (60W)
Operating Temperature
-10°C to 60°C. 0°C to 40°C
Storage Temperature
-20°C to 70°C. -10°C to 50°C
Relative Humidity
10% to 95% @ 40, non-condensing
Mounting
Wall/Stand/VESA 75 mm X 75 mm
Dimensions
202.5 mm X 159.5 mm X 42.3 mm (w/HDD 202.5 x 159.5 x 55 mm)
Weight
1.38 Kgs (w/HDD 1.68Kgs)
Note: 1. LPC-08A1 supports +10V~28V wide range power input.
2. Either RS-232 or RS-422/485 for COM2 only.
LPC-08 Series
6 LPC-08 Series Quick Reference Guide
1.4 System Overview
1.4.1 Rear View
1.4.2 Right View
Connectors
Label Function Note CF Cover
CompactFlash Type I/II socket with cover
COM
Serial port 1 & 2
(Optional RS-422/485 for COM2)
DB-9 male connector
DC in
+12V DC-in power connector
(Optional industrial DC-in co-lay with COM2)
KB/MS/USB
PS/2 keyboard & mouse connector
(LPC-08A1)
2 x USB connector (LPC-0803)
6-pin Mini DIN or dual USB decks
LAN
Ethernet connector RJ-45
LINE OUT
Line-out audio jack
Power
Power switch
USB
USB 2.0 connector
VGA
CRT connector DB-15 female connector
Note: The optional WiFi module will occupy one USB port for LPC-08A1.
Quick Reference Guide
LPC-08 Series Quick Reference Guide
7
1.5 System Dimensions
1.5.1 LPC-08 Series
LPC-08 Series
8 LPC-08 Series Quick Reference Guide
2. Hardware Configuration
2.1 Jumper and Connector Setting, Driver and BIOS
Installing
z Please refer to ECM-LX800D, ECM-945GSE Quick Installation Guide or
User’s Manual for further information.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
Quick Reference Guide
LPC-08 Series Quick Reference Guide
9
2.2 Installing Memory
Note: Memory installation is not for LPC-08A1 due to 512MB memory onboard.
Step 1. Unfasten 6 screws to remove the bottom chassis.
Step 2. Unlock 4 coppers from the rear I/O of VGA & COM ports.
Step 3. Release 4 screws to take off the board, and install the RAM module into the
memory slot.
Step 4. Assemble the board and bottom chassis back as step 3 to step 1.
LPC-08 Series
10 LPC-08 Series Quick Reference Guide
2.3 Installing CF Card
Step 1. Unlock 2 screws from the rear side of the panel PC as above.
Step 2. Put the CF card into the socket and fasten 2 screws back.
Quick Reference Guide
LPC-08 Series Quick Reference Guide
11
2.4 Installing Hard Disk
Note: To install the HDD of LPC-08 series requires specific bottom chassis.
Step 1. Unfasten 6 screws to remove the bottom chassis.
LPC-08 Series
12 LPC-08 Series Quick Reference Guide
Step 2. Lock 4 screws with HDD bracket and assemble 4 cushions.
Step 3. Lock 4 screws to install the HDD into the bottom chassis. Step 4. Assemble the bottom chassis back as step 3 to step 1.
Loading...