Avalue Technology BAX-P501-C236 Quick Reference Manual

Part No. E2017BAPCA0R
BAX-P501-C236
ATX Barebone System with Intel® C236 Chipset
1st Ed –17 October 2016
Copyright Notice
Copyright 2016 Avalue Technology Inc., ALL RIGHTS RESERVED.
BAX-P501-C236
2 BAX-P501-C236 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "B" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Copyright Notice
Copyright 2016 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
3
CONTENT
1. Getting Started ............................................................................................................ 4
1.1 Safety Precautions ................................................................................................ 4
1.2 Packing List ........................................................................................................... 4
1.3 System Specifications ........................................................................................... 5
1.4 System Overview ................................................................................................... 8
1.4.1 Front/Rear View ........................................................................................................................... 8
1.5 System Dimensions ............................................................................................. 10
2. Hardware Configuration ........................................................................................... 11
2.1 BAX-P501-C236 connector mapping ................................................................... 12
2.1.1 Serial port 1/3/4/5/6 connector (COM1/3/4/5/6) ......................................................................... 12
2.1.2 Serial port 2 connector (COM2) ................................................................................................. 12
2.1.3 VGA connector (VGA) ................................................................................................................ 13
BAX-P501-C236
4 BAX-P501-C236 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.
1.2 Packing List
1 x BAX-P501-C236 ATX Barebone System with Intel® C236 Chipset Other major components include the followings:
1 x Power Cord 1 x Screw Pack 2 x Wall Mount Bracket
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
5
1.3 System Specifications
Component
Mother Board
EAX-C236P-A1R
CPU
Intel® LGA1151 Socket Supports 6th Generation Core™ i3/i5/i7/
Intel® Xeon® Process E3-1200 v5 Family (Workstation) / Intel® Pentium® / Celeron ® Processors (Max. TDP at 95W)
CPU Cooler (Type)
CPU Cooler for LGA1155 Package 4-Pin/12V
Memory
4 x 288-pin DDR4 2133MHz DIMM socket, supports up to 64GB
Max (ECC memory supported by CPU)
Power Supply
PS2 ATX 350W W/Active PFC Power Supply
System Fan
1 x 12” Fan M3*30L
Storage
Hard Disk Drive
1 x 2.5" or 1 x 3.5" Internal Drive Bay
Optical Disk Drive
2 x 5.25” Drive Bays
External I/O
PS/2 KB & Mouse
1 x PS/2 KB or Mouse
Serial Port
6 x COM
USB Port
4 x USB 2.0 (Front) 4 x USB 3.0 (Rear) 2 x USB 2.0, 2 x USB 3.0 (Optional by full-height bracket)
Video Port
1 x VGA, 1 x HDMI, 1 x DP, Triple display
Audio Port
Line-in, Line-out, Mic-in
LAN Port
LAN1 / Intel® I219LM Gigabit Ethernet PHY LAN2 / Intel® I211AT PCI-e Gigabit Ethernet
Indicator Light
1 x PWR LED, 1 x HDD LED
Expansion Slots
1 x PCI-e x 16, 1 x PCI-e x 4, 1 x PCI-e x 1, 4 x PCI 1 x M.2 2230 KeyA Slot support WiFi module 1 x SIM card slot 1 x Full Size Mini-PCIe with mSATA Support (SATA III) 7 x Full-height expansion slot
Others
Power on/off button, Reset button
Mechanical
Power Type
ATX
Power Connector Type
AC power socket
Dimension
7.7” (W) x 17.7” (D) x 13” (H)
(196mm x 450mm x 330mm)
Weight
30.8 lb/14 kg
BAX-P501-C236
6 BAX-P501-C236 Quick Reference Guide
Color
Black
Reliability
EMI Test
CE/FCC Class B design compatible
Safety
UL/CB design compatible
Vibration Test
Package Vibration Test Test StandardReference IEC60068-2-64 Testing procedures
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
Random Vibration Operation Test StandardReference IEC60068-2-64 Test Condition
1. PSD: 0.00050513G²/Hz, 0.5 Grms
2. Operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 minutes per each axis
6. Storage : HDD
Sine Vibration test (Non-operation)
1. Test Acceleration : 2G
2. Test frequency : 5~500 Hz
3. Sweep1 Oct/ per one minute. (logarithmic)
4. Test Axis : X,Y and Z axis
5. Test time :10 min. each axis
6. System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Mechanical Shock Test
Reference IEC 60068-2-29 Testing procedures Test Eb : Bump Test Wave formHalf Sine wave Acceleration Rate3g Duration Time11ms No. of ShockZ axis 300 times Test Axis: Z axis System condition : operation (running burn in test program )
Drop Test
Packing Drop
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
7
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed Test Ea :
Drop Test
Test phase : One corner, three edges, six faces
Operating Temperature
(w/HDD), ambient w/ air flow 0°C ~ 40°C (32°F ~ 104°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Storage Temperature
-20°C ~ 75°C (-4°F ~ 167°F)
Note: Specifications are subject to change without notice.
BAX-P501-C236
8 BAX-P501-C236 Quick Reference Guide
1.4 System Overview
1.4.1 Front/Rear View
Connectors
Label
Function
Note
RESET
Reset button
HDD
HDD Indicator
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
9
PWR
System power indicator
POWER
Power on button
USB2.0
4 x USB2.0 connector
USB3.0
4 X USB3.0 connector
LAN1/2
RJ-45 Ethernet 1/2
COM1~6
Serial port 1~6 connector
PS/2 COMBO JACK
PS/2 keyboard & mouse connector
HDMI
HDMI connector
LINE-OUT
Line-out audio jack
LINE-IN
Line-in audio jack
MIC-IN
Mic-in audio jack
VGA
VGA connector
DP
DP connector
BAX-P501-C236
10 BAX-P501-C236 Quick Reference Guide
1.5 System Dimensions
(Unit: mm)
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
11
2. Hardware Configuration
For advanced information, please refer to:
1- EAX-C236P User’s Manual
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
BAX-P501-C236
12 BAX-P501-C236 Quick Reference Guide
2.1 BAX-P501-C236 connector mapping
2.1.1 Serial port 1/3/4/5/6 connector (COM1/3/4/5/6)
Signal
PIN
PIN
Signal
NDCD#
1 6 NDSR#
NRXD
2 7 NRTS#
NTXD
3 8 NCTS#
NDTR#
4 9 JNRI#
GND
5
2.1.2 Serial port 2 connector (COM2)
RS-485 Mode
Signal
PIN
PIN
Signal
485TX-
1 6 NC
NC
2 7 NC
485TX+
3 8 NC
NC
4 9 NC
GND
5
RS-232 Mode
Signal
PIN
PIN
Signal
NDCD#
1 6 NDSR#
NRXD
2 7 NRTS#
NTXD
3 8 NCTS#
NDTR#
4 9 JNRI#
GND
5
RS-422 Mode
Signal
PIN
PIN
Signal
485TX-
1 6 NC
422RX-
2 7 NC
485TX+
3 8 NC
422RX+
4 9 NC
GND
5
Quick Reference Guide
BAX-P501-C236 Quick Reference Guide
13
2.1.3 VGA connector (VGA)
PIN
Signal
PIN
Signal
PIN
Signal
1
RED
6
GND
11
NC
2
GREEN
7
GND
12
DDCDAT
3
BLUE
8
GND
13
HSYNC
4
NC 9 +5V
14
VSYNS
5
GND
10
GND
15
DDCCLK
Loading...