How it Works
Avalue Technology
Loading...
ARC-1232
Quick Reference Manual
75 pgs2.53 Mb0

Avalue Technology ARC-1232, ARC-1532 Quick Reference Manual

Download
ARC-1232/1532
12.1"/15" 6th Gen Intel® ULT Core™ Processor i7/i5/i3 Fanless Rugged Touch Panel PC with IET Expansion
Quick Reference Guide
5th Ed – 22 June 2018
Copyright 2018 ALL RIGHTS RESERVED.
ARC-1232/1532
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Customer Services
Each and every product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new device is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation
Your satisfaction is our primary concern. Here is a guide to our customer services. To ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
2 ARC-1232/1532 Quick Reference Guide
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................ 7
1.1 Safety Precautions .................................................................................................... 7
1.2 Packing List ............................................................................................................... 7
1.3 System Specifications ............................................................................................... 8
1.4 System Overview .................................................................................................... 11
1.4.1 I/O View ................................................................................................................................. 11
1.5 System Dimensions ................................................................................................ 12
1.5.1 ARC-1232 (A Model) ............................................................................................................. 12
1.5.2 ARC-1232 (B Model) ............................................................................................................. 13
1.5.3 ARC-1532 (A Model) ............................................................................................................. 14
1.5.4 ARC-1532 (B Model) ............................................................................................................. 15
2. Hardware Configuration ....................................................................................... 16
2.1 ARC-1232/1532 connector mapping ....................................................................... 17
2.1.1 Serial port 1 connector (COM1) ............................................................................................. 17
2.1.2 Serial port 2 connector (COM2) ............................................................................................. 17
2.2 Installing Hard Disk & Memory ................................................................................ 18
2.3 Installing ARC-BYT DB ........................................................................................... 20
2.4 ARC-SKLU Overviews ............................................................................................ 22
2.5 ARC-SKLU Jumper and Connector list ................................................................... 23
2.6 ARC-SKLU Jumpers & Connectors settings ........................................................... 24
2.6.1 Clear CMOS (JCOMS1) ........................................................................................................ 24
2.6.2 Serial port 1/2 pin9 signal select (JRI1/JRI2) ........................................................................ 24
2.6.3 LCD backlight brightness adjustment (JBKLSEL1) ............................................................... 25
2.6.4 AT/ATX Input power select (JAT1) ........................................................................................ 25
2.6.5 Serial port 1 in RS-232/422/485 mode (JCOM1_SEL1)........................................................ 26
2.6.6 LCD Inverter connector (JBKL1) ........................................................................................... 26
2.6.7 On-board header for USB2.0 (JUSB1) .................................................................................. 27
2.6.8 On-board header for USB2.0 (JUSB2) .................................................................................. 27
2.6.9 Battery connector (JBAT1) .................................................................................................... 28
2.6.10 LCD backlight brightness adjustment (JBLK_CTRL1) .......................................................... 28
2.6.11 LVDS connector (JLVDS1) .................................................................................................... 29
2.6.12 AMPLIFIER_R (JSPR1) ........................................................................................................ 30
2.6.13 AMPLIFIER_L (JSPL1) .......................................................................................................... 30
2.6.14 SPI connector (JSPI1) ........................................................................................................... 31
ARC-1232/1532
4 ARC-1232/1532 Quick Reference Guide
2.6.15 EC Debug connector (JEC1) ................................................................................................. 31
2.6.16 B2B connector (JB2B1) ......................................................................................................... 32
2.6.17 Touch panel connector (JTP1) .............................................................................................. 33
2.6.18 General purpose I/O connector (JGPIO1) ............................................................................. 33
2.6.19 SATA Power connector (SATAPW1)..................................................................................... 34
2.7 ARC-BYT DB-A/B/C/D/G/H/K Overviews ................................................................ 35
2.7.1 ARC-BYT DB-A ..................................................................................................................... 35
2.7.2 ARC-BYT DB-B ..................................................................................................................... 35
2.7.3 ARC-BYT DB-C ..................................................................................................................... 35
2.7.4 ARC-BYT DB-D ..................................................................................................................... 36
2.7.5 ARC-BYT DB-G ..................................................................................................................... 36
2.7.6 ARC-BYT DB-H ..................................................................................................................... 36
2.7.7 ARC-BYT DB-K ..................................................................................................................... 37
2.8 ARC-BYT DB-A/B/C/D/G/H/K Connector list ........................................................... 37
2.8.1 ARC-BYT DB-A ..................................................................................................................... 37
2.8.2 ARC-BYT DB-B ..................................................................................................................... 37
2.8.3 ARC-BYT DB-C ..................................................................................................................... 37
2.8.4 ARC-BYT DB-D ..................................................................................................................... 38
2.8.5 ARC-BYT DB-G ..................................................................................................................... 38
2.8.6 ARC-BYT DB-H ..................................................................................................................... 38
2.8.7 ARC-BYT DB-K ..................................................................................................................... 38
2.9 ARC-BYT DB-D Connectors settings ...................................................................... 39
2.9.1 Serial Port 1 connector (D_COM1)........................................................................................ 39
2.9.2 Serial Port 2 connector (D_COM2)........................................................................................ 39
2.10 ARC-BYT DB-G Connectors settings ...................................................................... 40
2.10.1 Serial Port 1 connector (G_COM1) ....................................................................................... 40
2.10.2 Serial Port 2 connector (G_COM2) ....................................................................................... 40
2.10.3 Serial Port 3 connector (G_COM3) ....................................................................................... 41
2.11 ARC-BYT DB-H Jumpers settings ........................................................................... 41
2.11.1 USB Power selector (H_USB_PWR_SEL1) .......................................................................... 41
2.12 ARC-BYT DB-H Connectors settings ...................................................................... 42
2.12.1 Serial Port 1 connector (H_COM1)........................................................................................ 42
2.12.2 Serial Port 2 connector (H_COM2)........................................................................................ 42
2.13 ARC-BYT DB-K Connectors settings ...................................................................... 43
2.13.1 Serial Port 1 connector (I_COM1) ......................................................................................... 43
2.13.2 Serial Port 2 connector (I_COM2) ......................................................................................... 43
3.BIOS Setup .................................................................................................................... 44
3.1 Introduction ............................................................................................................. 45
3.2 Starting Setup ......................................................................................................... 45
3.3 Using Setup ............................................................................................................ 46
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
5
3.4 Getting Help ............................................................................................................ 47
3.5 In Case of Problems ................................................................................................ 47
3.6 BIOS setup .............................................................................................................. 48
3.6.1 Main Menu ............................................................................................................................. 48
3.6.1.1 System Language ............................................................................................................................ 49
3.6.1.2 System Date .................................................................................................................................... 49
3.6.1.3 System Time .................................................................................................................................... 49
3.6.2 Advanced Menu ..................................................................................................................... 49
3.6.2.1 Trusted Computing .......................................................................................................................... 50
3.6.2.2 APCI Settings .................................................................................................................................. 50
3.6.2.3 AMT Configuration ........................................................................................................................... 52
3.6.2.4 PCH-FW Configuration .................................................................................................................... 53
3.6.2.5 IT8528 Super IO Configuration ........................................................................................................ 53
3.6.2.5.1 Serial Port 1 Configuration ................................................................................................ ............... 54
3.6.2.5.2 Serial Port 2 Configuration ................................................................................................ ............... 55
3.6.2.5.3 Serial Port 3 Configuration ................................................................................................ ............... 55
3.6.2.5.4 Serial Port 4 Configuration ................................................................................................ ............... 56
3.6.2.5.5 Serial Port 5 Configuration ................................................................................................ ............... 56
3.6.2.6 H/W Monitor ..................................................................................................................................... 57
3.6.2.7 S5 RTC Wake Settings .................................................................................................................... 57
3.6.2.8 Serial Port Console Redirection ....................................................................................................... 58
3.6.2.8.1 Legacy Console Redirection Settings .............................................................................................. 58
3.6.2.9 CPU Configuration ........................................................................................................................... 59
3.6.2.10 Intel TXT Configuration .................................................................................................................... 59
3.6.2.11 SATA Configuration ......................................................................................................................... 60
3.6.2.12 Network Stack Configuration ........................................................................................................... 61
3.6.2.13 CSM Configuration........................................................................................................................... 61
3.6.2.14 USB Configuration ........................................................................................................................... 62
3.6.3 Chipset ................................................................................................................................. 63
3.6.3.1 System Agent (SA) Configuration .................................................................................................... 63
3.6.3.1.1 Graphics Configuration ................................................................ .................................................... 64
3.6.3.1.2 Memory Configuration ...................................................................................................................... 65
3.6.3.2 PCH-IO Configuration ...................................................................................................................... 66
3.6.3.2.1 PCI Express Configuration ............................................................................................................... 66
3.6.3.2.1.1 PCI Express Root Port5 (i210/211) ......................................................................................... 67
3.6.3.2.1.2 PCI Express Root Port8 (B2B mPCIe) .................................................................................... 68
3.6.3.2.1.3 PCI Express Root Port12 (mPCIe) .......................................................................................... 69
3.6.3.2.2 USB Configuration ........................................................................................................................... 70
3.6.3.2.3 HD Audio Configuration ................................................................................................................... 70
3.6.4 Security ................................................................................................................................ 71
ARC-1232/1532
6 ARC-1232/1532 Quick Reference Guide
3.6.4.1 Secure Boot menu ........................................................................................................................... 72
3.6.4.1.1 Key Management ............................................................................................................................. 73
3.6.5 Boot ...................................................................................................................................... 73
3.6.6 Save and exit ....................................................................................................................... 74
3.6.6.1 Save Changes and Reset ................................................................................................................ 75
3.6.6.2 Discard Changes and Reset ............................................................................................................ 75
3.6.6.3 Restore Defaults .............................................................................................................................. 75
3.6.6.4 Launch EFI Shell from filesystem device ......................................................................................... 75
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
7
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.
1.2 Packing List
1 x ARC-1232/1532 Panel PC 1 x Driver/Utility DVD-ROM 1 x Power Adapter 1 x Power cord 4 x screws for VESA
ARC-1232/1532
8 ARC-1232/1532 Quick Reference Guide
1.3 System Specifications
Panel
ARC-1232
ARC-1532
LCD Size
12.1", 4:3
15", 4:3
Display Type
XGA
Resolution
1024 x 768
Pixel pitch
0.1905 mm (H) x 0.1905 mm (V)
0.297mm(H) x 0.297mm(V)
Luminance
600 cd/m²
400 cd/m²
Contrast ratio
700
Viewing angle
70 (U), 70 (D), 80 (L), 80 (R)
70 (U), 70 (D), 80 (L), 80 (R)
Response time
16ms
Backlight
LED
Touch Type
5 Wires resistive (A Model)
Projected Capacitive (B Model)
Touch Light
Transmission
80% (A Model)
89% (B Model)
Touch Controller
Onboard USB touch (PenMount) (A Model)
EETI (B Model)
System
SBC
ARC-SKLU
Processor
6th Gen Intel® Core™ i5-6300U, 2-Core, 2.4GHz processor
I/O Chipset
EC ITE IT8528E
System Memory
1 x 260-Pin DDR4 2133MHz SO-DIMM
Watchdog Timer
H/W Reset, 1sec. ~ 65535min. and 1sec. or 1min./step
H/W Status Monitor
Monitoring SYSTEM Temperature and Voltage with Auto Throttling Control
Expansion
Expansion
1 x Mini PCIe Support mSATA 1 x Optional 80-pin Expansion
Storage
Storage
1 x 2.5" Drive Bay (7mm HDD Restricted)
I/O
USB
4 x USB 3.0
SATA
1 x SATA III
Com Port
1 x RS-232/422/485 (Factory Optional)
1 x RS-232
Other
3 x Knockouts for Antenna Mounting
Display
Chipset
Intel® Skylake SoC integrated Graphics
Supports optional dual display
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
9
Resolution
HDMI: Max. resolution 4096 x 2160 @ 24Hz (by IET module)
Audio
Audio Codec
Realtek ALC892_optional expansion BD
Audio Interface
Speaker Out
Speaker Output
2 x 2W
Ethernet
Chipset
1 x Intel® I210AT
1 x Intel® I219LM
Ethernet Interface
10/100/1000 Base-Tx GbE compatible
Lan Port
2 x RJ-45
Power Requirement
Power Connector
Lockable DC Jack
Power Requirement
+12V ~ +26V
Power Type
AT/ATX (ATX is default setting)
Adapter
Input: 100 ~ 240Vac/ 50 ~ 60Hz
Mechanical &
Environmental
System Fan
Fanless
Construction - Front
Silver Aluminum
Construction – Rear
Black
Dimension
284 x 223 x 62.2 mm (A Model) 294 x 226.3 x 51 mm (B Model)
350 x 274 x 49.8 mm (A Model)
350.5 x 274.5 x 53 mm (B Model)
Weight
2.4 Kgs
3.7 Kgs
Operating
Temperature
-20°C ~ 60°C (-4°F ~ 140°F) (A Model)
-10°C ~ 50°C (14°F ~ 122°F) (B Model)
Storage Temperature
-20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Vibration Test
ARC-1232
With SSD/mSATA : 5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis
ARC-1532
With SSD/mSATA : 3Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis
Mounting
Wall / Stand / VESA 75mm x 75mm, 100mm x 100mm
Shock Test
Operating with SSD/CFast/mSATA : MIL-STD-810G, Method 516.6,
Procedure I, functional shock=20G
Certifications
Certifications
Information
CE
FCC Class B
Software Support
OS Information
Win7, Win 8.1,Win 10, Linux
ARC-1232/1532
10 ARC-1232/1532 Quick Reference Guide
Ordering Information/
Description
ACC-ARC-USB-1R
4 x USB3.0 (ARC-BYT DB-A)
ACC-ARC-AUDIO-1R
HDMI + Audio/Line out, Line in, Mic in (ARC-BYT DB-B)
ACC-ARC-MPCIE-1R
HDMI + Mini PCIe w/ SIM slot (ARC-BYT DB-C)
ACC-ARC-COM-1R
2 x Isolated RS-232 / 2kv (ARC-BYT DB-D)
ACC-ARC-COM-2R
3 x RS-232 (ARC-BYT DB-G)
ACC-ARC-COM-3R
2 x RS-232 + USB 2.0 (ARC-BYT DB-H)
ACC-ARC-COM-4R
2 x RS-232 + LAN (ARC-BYT DB-K)
ACC-ARC-GPIO-1R
12-bit GPIO + 2-pin CAN Bus Kit for ARC Series
ACC-ARC-OBDII-1R
OBDII - CAN Bus Kit for ARC Series (Small Vehicle)
ACC-ARC-OBDII-2R
OBDII - CAN Bus Kit for ARC Series (Large Vehicle)
ACC-ARC-OBDII-3R
OBDII - CAN Bus Kit for ARC Series (Special Large Vehicle)
Note: Specifications are subject to change without notice.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
11
1.4 System Overview
1.4.1 I/O View
Connectors
Label
Function
Note
DC-IN
DC Power-in connector
COM1/2
Serial port 1/2 connector
DB-9 male connector
USB
4 x USB 3.0 connector
LAN1/2
RJ-45 Ethernet 1/2
LED
HDD/Power LED indicator
Power Switch
Power on button
ARC-1232/1532
12 ARC-1232/1532 Quick Reference Guide
1.5 System Dimensions
1.5.1 ARC-1232 (A Model)
(Unit: mm)
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
13
1.5.2 ARC-1232 (B Model)
(Unit: mm)
ARC-1232/1532
14 ARC-1232/1532 Quick Reference Guide
1.5.3 ARC-1532 (A Model)
(Unit: mm)
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
15
1.5.4 ARC-1532 (B Model)
(Unit: mm)
ARC-1232/1532
16 ARC-1232/1532 Quick Reference Guide
2.Hardware Configuration
For advanced information, please refer to:
1- ARC-SKLU, ARC-BYT DB-A/B/C/D/G/H/K included in this manual.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
17
2.1 ARC-1232/1532 connector mapping
2.1.1 Serial port 1 connector (COM1)
RS-485
Signal
PIN
PIN
Signal
DATA-
1 6 NC
DATA+
2 7 NC
NC
3 8 NC
NC
4 9 NC
GND
5
Please set BIOS & JCOM2_SEL2
RS-232
Signal
PIN
PIN
Signal
NDCDA#
1 6 NDSRA#
NRXDA
2 7 NRTSA#
NTXDA
3 8 NCTSA#
NDTRA#
4 9 NRIA#
GND
5
RS-422
Signal
PIN
PIN
Signal
TxD-
1 6 NC
TxD+
2 7 NC
RxD+
3 8 NC
RxD-
4 9 NC
GND
5
Please set BIOS & JCOM2_SEL2
2.1.2 Serial port 2 connector (COM2)
Signal
PIN
PIN
Signal
NDCDB#
1 6 NDSRB#
NRXDB
2 7 NRTSB#
NTXDB
3 8 NCTSB#
NDTRB#
4 9 NRIB#
GND
5
ARC-1232/1532
18 ARC-1232/1532 Quick Reference Guide
2.2 Installing Hard Disk & Memory
Step 1. Memory Installation: Remove 3 screws to release the chassis cover, and remove it.
Step 2.1 Insert the SODIMM into the memory socket. Step 2.2 Re-assemble your system back through previous steps to complete the installation.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
19
Step 3. HDD Installation: Insert the HDD into the Drive Bay and fasten 2 screws.
ARC-1232/1532
20 ARC-1232/1532 Quick Reference Guide
2.3 Installing ARC-BYT DB
Step 1. Unfasten 2 screws of the HDD bracket and take it off.
Step 2. Remove 4 screws to release the chassis cover, and remove it.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
21
Step 2.1 Insert the ARC-BYT DB into the socket and fasten 3 screws. Step 2.2 Re-assemble your system back through previous steps to complete the installation
ARC-1232/1532
22 ARC-1232/1532 Quick Reference Guide
2.4 ARC-SKLU Overviews
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
23
2.5 ARC-SKLU Jumper and Connector list
Jumper
Label
Function
Note
JCOMS1
Clear CMOS
3 x 1 header, pitch 2.00mm
JRI1/2
Serial port 1/2 pin9 signal select
3 x 2 header, pitch 2.00mm
JCOM1_SEL1
Serial port 1 in RS-232/422/485 mode
4 x 3 header, pitch 2.00mm
JBKLSEL1
LCD backlight brightness adjustment
3 x 1 header, pitch 2.00mm
JAT1
AT/ATX Input power select
3 x 1 header, pitch 2.00mm
Connectors
Label
Function
Note
SODIMM1
1 x 260-Pin DDR4 2133MHz SO-DIMM
JBKL1
LCD Inverter connector
5 x 1 wafer, pitch 2.00mm
COM1/2
Serial Port 1/2 connector
D-sub 9 pin, male
JTP1
Touch panel connector
5 x 1 header, pitch 2.54mm
JSPR1
AMPLIFIER_R
2 x 1 wafer, pitch 2.00mm
JSPL1
AMPLIFIER_L
2 x 1 wafer, pitch 2.00mm
JB2B1
B2B connector
40 x 2 wafer, pitch 0.80mm
JBKLCTL1
LCD backlight brightness adjustment
3 x 2 header, pitch 2.00mm
LED1
HDD/Power LED indicator
JLVDS1
LVDS connector
DIN 40-pin wafer, pitch 1.25mm
USB1/2
USB connector 1/2
JUSB1
On-board header for USB2.0
5 x 1 wafer, pitch 2.00mm
JUSB2
On-board header for USB2.0
5 x 2 wafer, pitch 2.00mm
LAN1/2
RJ-45 Ethernet 1/2
MPCIE1
Mini-PCIe connector
JBAT1
Battery connector
2 x 1 wafer, pitch 1.25mm
JGPIO1
General purpose I/O connector
6 x 2 wafer, pitch 2.00mm
JPWR1
Power connector
JSPI1
SPI connector
4 x 2 header, pitch 2.00mm
JEC1
EC Debug connector
2 x 1 header, pitch 2.00 mm
SATA1
Serial ATA connector
SATAPW1
SATA Power connector
2 x 1 wafer, pitch 2.00mm
ARC-1232/1532
24 ARC-1232/1532 Quick Reference Guide
2.6 ARC-SKLU Jumpers & Connectors settings
2.6.1 Clear CMOS (JCOMS1)
*Default
Protect*
Clear CMOS
2.6.2 Serial port 1/2 pin9 signal select (JRI1/JRI2)
* Default
Ring*
+5V
+12V
JRI1
JRI2
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
25
2.6.3 LCD backlight brightness adjustment (JBKLSEL1)
* Default
PWM Mode*
DC Mode
2.6.4 AT/ATX Input power select (JAT1)
* Default
ATX*
AT
ARC-1232/1532
26 ARC-1232/1532 Quick Reference Guide
2.6.5 Serial port 1 in RS-232/422/485 mode (JCOM1_SEL1)
* Default
RS232*
RS422
RS485
PIN
Signal
PIN
Signal
PIN
Signal
12
422RX1-
11
COM1-4
10
NDTRA#
9
485_422TX1+
8
COM1-2
7
NRXDA
6
422RX1+
5
COM1-3
4
NTXDA
3
485_422TX1-
2
COM1-1
1
NDCDA#
Note:
This connector is available after modify the mode of COM1 in BIOS setting.
2.6.6 LCD Inverter connector (JBKL1)
Signal
PIN
+5V
5
LVDS_BKLT_CTL
4
LVDS_BKLT_EN
3
GND
2
+12V
1
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
27
2.6.7 On-board header for USB2.0 (JUSB1)
Signal
PIN
+5VSB
1
USB_z_PN10
2
USB_z_PP10
3
GND
4
GND
5
2.6.8 On-board header for USB2.0 (JUSB2)
Signal
PIN
PIN
Signal
+5VSB
2 1 +5VSB
USB_z_PN6
4 3 USB_z_PN5
USB_z_PP6
6 5 USB_z_PP5
GND
8 7 GND
GND
10 9 GND
ARC-1232/1532
28 ARC-1232/1532 Quick Reference Guide
2.6.9 Battery connector (JBAT1)
Signal
PIN
+RTCBAT
1
GND
2
2.6.10 LCD backlight brightness adjustment (JBLK_CTRL1)
PIN
Signal
Note
1-2
BLK_VR_MOD
VR must select 10K/1%
3-4
BLK_BRI_UP
Low pulse button for
backlight brighter
5-6
BLK_BRI_DN
Low pulse button for
backlight dim
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
29
2.6.11 LVDS connector (JLVDS1)
Signal
PIN
PIN
Signal
+5V
2 1 +3.3V
+5V
4 3 +3.3V
NC
6 5 NC
GND
8 7 GND
LVDS_DATA0_P
10 9 LVDS_DATA1_P
LVDS_DATA0_N
12
11
LVDS_DATA1_N
GND
14
13
GND
LVDS_DATA2_P
16
15
LVDS_DATA3_P
LVDS_DATA2_N
18
17
LVDS_DATA3_N
GND
20
19
GND
LVDS_DATA4_P
22
21
LVDS_DATA5_P
LVDS_DATA4_N
24
23
LVDS_DATA5_N
GND
26
25
GND
LVDS_DATA6_P
28
27
LVDS_DATA7_P
LVDS_DATA6_N
30
29
LVDS_DATA7_N
GND
32
31
GND
LVDS_CLK1_P
34
33
LVDS_CLK2_P
LVDS_CLK1_N
36
35
LVDS_CLK2_N
GND
38
37
GND
+12V
40
39
+12V
ARC-1232/1532
30 ARC-1232/1532 Quick Reference Guide
2.6.12 AMPLIFIER_R (JSPR1)
Signal
PIN
SPK_R-
2
SPK_R+
1
2.6.13 AMPLIFIER_L (JSPL1)
Signal
PIN
SPK_L-
2
SPK_L+
1
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
31
2.6.14 SPI connector (JSPI1)
Signal
PIN
PIN
Signal
+3.3VSB
1 2 GND
SPI0_CS0#
3 4 SPI_CLK
SPI_SO
5 6 SPI_SI
HOLD#
7
2.6.15 EC Debug connector (JEC1)
Signal
PIN
EC_SMCLK_DEBUG
1
EC_SMDAT_DEBUG
2
ARC-1232/1532
32 ARC-1232/1532 Quick Reference Guide
2.6.16 B2B connector (JB2B1)
Signal
PIN
PIN
Signal
GND
1
41
GND
GND
2
42
GND
+12V
3
43
GND
+12V
4
44
GND
GND
5
45
GND
LPC_SERIRQ
6
46
+5VSB
LPC_LFRAME#
7
47
+5VSB
CLK3_LPC_B2B
8
48
+5VSB
LPC_AD0
9
49
+5VSB
LPC_AD1
10
50
+5VSB
Signal
PIN
PIN
Signal
LPC_AD2
11
51
GND
LPC_AD3
12
52
USB_PP8
PS_ON_B2B
13
53
USB_PN8
PLT_RST#
14
54
GND
PCH_SLP_S3#
15
55
SMBCLK
HDMI_HPD
16
56
SMBDATA
GND
17
57
GND
HDMI1_CTRL_CLK
18
58
BOARD_ID
HDMI1_CTRL_DAT
19
59
PCIEUSB3_PONRSTB
GND
20
60
PCIEUSB3_SMIB_INT#
HDMI1_TXN_2
21
61
B2BPCIE_WAKE#
HDMI1_TXP_2
22
62
RST_B2BPCIE#
GND
23
63
B2BPCIE_CLK_REQ#
HDMI1_TXN_1
24
64
GND
HDMI1_TXP_1
25
65
PCIE_TXN8
GND
26
66
PCIE_TXP8
HDMI1_TXN_0
27
67
GND
HDMI1_TXP_0
28
68
PCIE_RXN8
GND
29
69
PCIE_RXP8
HDMI1_CLKN
30
70
GND
HDMI1_CLKP
31
71
CLK_B2BPCIE_N2
GND
32
72
CLK_B2BPCIE_P2
GND
33
73
GND
MIC_RIN
34
74
GND
MIC_LIN
35
75
MIC1_JD
GND
36
76
GND
LINEOUT1_JD
37
77
LINE1_JD
LINEOUT_R
38
78
LINE1_RIN
LINEOUT_L
39
79
LNE1_LIN
GND
40
80
GND
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
33
2.6.17 Touch panel connector (JTP1)
Signal
PIN
Y-
1
Y+
2
SENSE
3
X-
4
X+
5
2.6.18 General purpose I/O connector (JGPIO1)
Signal
PIN
PIN
Signal
+3.3V
11
12
GND
SMB_DATA
9
10
SMB_CLK
DIO_GP23
7 8 DIO_GP13
DIO_GP22
5 6 DIO_GP12
DIO_GP21
3 4 DIO_GP11
DIO_GP20
1 2 DIO_GP10
ARC-1232/1532
34 ARC-1232/1532 Quick Reference Guide
2.6.19 SATA Power connector (SATAPW1)
Signal
PIN
GND
1
+5V
2
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
35
2.7 ARC-BYT DB-A/B/C/D/G/H/K Overviews
2.7.1 ARC-BYT DB-A
2.7.2 ARC-BYT DB-B
2.7.3 ARC-BYT DB-C
ARC-1232/1532
36 ARC-1232/1532 Quick Reference Guide
2.7.4 ARC-BYT DB-D
2.7.5 ARC-BYT DB-G
2.7.6 ARC-BYT DB-H
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
37
2.7.7 ARC-BYT DB-K
2.8 ARC-BYT DB-A/B/C/D/G/H/K Connector list
2.8.1 ARC-BYT DB-A
Connectors
Label
Function
Note
A_JUSB1~4
USB3.0 connector 1~4
A_JB2B1
B2B connector
2.8.2 ARC-BYT DB-B
Connectors
Label
Function
Note
B_LINE_OUT1
Line-out audio jack
B_LINE_IN1
Line-in audio jack
B_MIC_IN1
Mic-in audio jack
B_JHDMI1
HDMI connector
B_JB2B1
B2B connector
2.8.3 ARC-BYT DB-C
Connectors
Label
Function
Note
C_JPCIE1
Mini PCI Express connector
C_JSIM1
SIM card slot (Push-push)
C_JHDMI1
HDMI connector
C_JB2B1
B2B connector
ARC-1232/1532
38 ARC-1232/1532 Quick Reference Guide
2.8.4 ARC-BYT DB-D
Connectors
Label
Function
Note
D_COM1/2
Serial Port 1/2 connector
DB-9 male connector
D_JB2B1
B2B connector
2.8.5 ARC-BYT DB-G
Connectors
Label
Function
Note
G_COM1/2/3
Serial Port 1/2/3 connector
DB-9 male connector
G_JB2B1
B2B connector
2.8.6 ARC-BYT DB-H
Jumpers
Label
Function
Note
H_USB_PWR_SEL1
USB Power selector
3 x 1 header, pitch 2.00mm
Connectors
Label
Function
Note
H_JUSB1
USB3.0 connector
H_COM1/2
Serial Port 1/2 connector
DB-9 male connector
H_JB2B1
B2B connector
2.8.7 ARC-BYT DB-K
Connectors
Label
Function
Note
I_JLAN1
RJ-45 Ethernet
I_COM1/2
Serial Port 1/2 connector
DB-9 male connector
I_JB2B1
B2B connector
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
39
2.9 ARC-BYT DB-D Connectors settings
2.9.1 Serial Port 1 connector (D_COM1)
Signal
PIN
PIN
Signal
NDCD#_3_D
1 6 NDSR#_3_D
NRXD_3_D
2 7 NRTS#_3_D
NTXD_3_D
3 8 NCTS#_3_D
NDTR#_3_D
4 9 NRI#_3_D
GND
5
2.9.2 Serial Port 2 connector (D_COM2)
Signal
PIN
PIN
Signal
NDCD#_2_D
1 6 NDSR#_2_D
NRXD_2_D
2 7 NRTS#_2_D
NTXD_2_D
3 8 NCTS#_2_D
NDTR#_2_D
4 9 NRI#_2_D
GND
5
ARC-1232/1532
40 ARC-1232/1532 Quick Reference Guide
2.10 ARC-BYT DB-G Connectors settings
2.10.1 Serial Port 1 connector (G_COM1)
Signal
PIN
PIN
Signal
NDCD#_3_G
1 6 NDSR#_3_G
NRXD_3_G
2 7 NRTS#_3_G
NTXD_3_G
3 8 NCTS#_3_G
NDTR#_3_G
4 9 NRI#_3_G
GND
5
2.10.2 Serial Port 2 connector (G_COM2)
Signal
PIN
PIN
Signal
NDCD#_2_G
1 6 NDSR#_2_G
NRXD_2_G
2 7 NRTS#_2_G
NTXD_2_G
3 8 NCTS#_2_G
NDTR#_2_G
4 9 NRI#_2_G
GND
5
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
41
2.10.3 Serial Port 3 connector (G_COM3)
Signal
PIN
PIN
Signal
NDCD#_1_G
1 6 NDSR#_1_G
NRXD_1_G
2 7 NRTS#_1_G
NTXD_1_G
3 8 NCTS#_1_G
NDTR#_1_G
4 9 NRI#_1_G
GND
5
2.11 ARC-BYT DB-H Jumpers settings
2.11.1 USB Power selector (H_USB_PWR_SEL1)
*Default
+5VSB*
+5V
ARC-1232/1532
42 ARC-1232/1532 Quick Reference Guide
2.12 ARC-BYT DB-H Connectors settings
2.12.1 Serial Port 1 connector (H_COM1)
Signal
PIN
PIN
Signal
NDCD#_1_H
1 6 NDSR#_1_H
NRXD_1_H
2 7 NRTS#_1_H
NTXD_1_H
3 8 NCTS#_1_H
NDTR#_1_H
4 9 NRI#_1_H
GND
5
2.12.2 Serial Port 2 connector (H_COM2)
Signal
PIN
PIN
Signal
NDCD#_2_H
1 6 NDSR#_2_H
NRXD_2_H
2 7 NRTS#_2_H
NTXD_2_H
3 8 NCTS#_2_H
NDTR#_2_H
4 9 NRI#_2_H
GND
5
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
43
2.13 ARC-BYT DB-K Connectors settings
2.13.1 Serial Port 1 connector (I_COM1)
Signal
PIN
PIN
Signal
NDCD#_1_I
1 6 NDSR#_1_I
NRXD_1_I
2 7 NRTS#_1_I
NTXD_1_I
3 8 NCTS#_1_I
NDTR#_1_I
4 9 NRI#_1_I
GND
5
2.13.2 Serial Port 2 connector (I_COM2)
Signal
PIN
PIN
Signal
NDCD#_2_I
1 6 NDSR#_2_I
NRXD_2_I
2 7 NRTS#_2_I
NTXD_2_I
3 8 NCTS#_2_I
NDTR#_2_I
4 9 NRI#_2_I
GND
5
ARC-1232/1532
44 ARC-1232/1532 Quick Reference Guide
3.BIOS Setup
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
45
3.1 Introduction
The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed.
3.2 Starting Setup
AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins the process of checking out the system and configuring it. When it finishes, the BIOS will seek an operating system on one of the disks and then launch and turn control over to the operating system.
While the BIOS is in control, the Setup program can be activated in one of two ways: By pressing <F2> or <Del> immediately after switching the system on, or By pressing the <F2> or <Del> key when the following message appears briefly at the left-top of the screen during the POST (Power On Self Test).
Press <F2> or <Del> to enter SETUP
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
ARC-1232/1532
46 ARC-1232/1532 Quick Reference Guide
3.3 Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the PageUp and PageDown keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
Button
Description
↑
Move to previous item
↓
Move to next item
←
Move to the item in the left hand
→
Move to the item in the right hand
Esc key
Main Menu -- Quit and not save changes into NVRAM Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu
+ key
Increase the numeric value or make changes
- key
Decrease the numeric value or make changes
F1 key
General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key
Previous Values
F3 key
Optimized defaults
F4 key
Save & Exit Setup
Navigating Through The Menu Bar
Use the left and right arrow keys to choose the menu you want to be in.
Note: Some of the navigation keys differ from one screen to another.
To Display a Sub Menu
Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
47
3.4 Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc> or the F1 key again.
3.5 In Case of Problems
If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the NVRAM settings which resets your system to its defaults.
The best advice is to only alter settings which you thoroughly understand. To this end, we strongly recommend that you avoid making any changes to the chipset defaults. These defaults have been carefully chosen by both BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override.
ARC-1232/1532
48 ARC-1232/1532 Quick Reference Guide
3.6 BIOS setup
Once you enter the Aptio Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.
3.6.1 Main Menu
This section allows you to record some basic hardware configurations in your computer and set the system clock.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
49
3.6.1.1 System Language
This option allows choosing the system default language.
3.6.1.2 System Date
Use the system date option to set the system date. Manually enter the day, month and year.
3.6.1.3 System Time
Use the system time option to set the system time. Manually enter the hours, minutes and seconds.
Note: The BIOS setup screens shown in this chapter are for reference purposes
only, and may not exactly match what you see on your screen.
3.6.2 Advanced Menu
This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus.
ARC-1232/1532
50 ARC-1232/1532 Quick Reference Guide
3.6.2.1 Trusted Computing
Item
Options
Description
Security Device Support
Disable,
Enable[Default]
Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
3.6.2.2 APCI Settings
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
51
Item
Options
Description
Enable Hibernation
Disabled
Enabled[Default],
Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS.
ACPI Sleep State
Suspend Disabled,
S3 (Suspend to RAM) [Default]
Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.
ACPI Low Power S0 Idle
Disabled[Default],
Enabled
Enable or Disable ACPI Low Power S0 Idle Support.
ErP Function
Disabled[Default],
Enabled
ErP Function (Deep S5).
PWR-On After PWR-Fail
Off[Default]
On
Last state
AC loss resume.
Watch Dog
Disabled[Default],
30 sec 40 sec 50 sec
1 min
2 min 10 min 30 min
Select WatchDog.
USB Standby Power Setting
Disabled
Enabled[Default],
Enabled/Disabled USB Standby Power during S3/S4/S5.
ARC-1232/1532
52 ARC-1232/1532 Quick Reference Guide
3.6.2.3 AMT Configuration
Item
Options
Description
Intel AMT
Disabled
Enabled[Default],
Enable/Disable Intel® Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device.
Un-Configure ME
Disabled[Default]
Enabled,
OEMFlag Bit 15: Un-Configure ME without password.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
53
3.6.2.4 PCH-FW Configuration
3.6.2.5 IT8528 Super IO Configuration
You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.5.1~ 3.6.2.5.5 for more information.
Item
Options
Description
DB board
DB-A/C/E/J
DB-B
DB-F 1COM
DB board A-K. DA-A/B/C/E/J w/o UART DB-G w/t 3UART DB-D/H/K w/t 2UART DB-F w/t 1UART.
ARC-1232/1532
54 ARC-1232/1532 Quick Reference Guide
DB-D/H/K 2COM
DB-G 3COM
M/B mode test[Default],
Serial Port 1 Configuration
Set Parameters of Serial Port 1 (COMA).
Serial Port 2 Configuration
Set Parameters of Serial Port 2 (COMB).
Serial Port 3 Configuration
Set Parameters of Serial Port 3 (COMC).
Serial Port 4 Configuration
Set Parameters of Serial Port 4 (COMD).
Serial Port 5 Configuration
Set Parameters of Serial Port 5 (COME).
3.6.2.5.1 Serial Port 1 Configuration
Item
Option
Description
Serial Port
Enabled[Default],
Disabled
Enable or Disable Serial Port (COM).
UART 232 422 485
UART 232[Default]
UART 422 UART 485
Change the Serial Port
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
55
3.6.2.5.2 Serial Port 2 Configuration
Item
Option
Description
Serial Port
Enabled[Default],
Disabled
Enable or Disable Serial Port (COM).
3.6.2.5.3 Serial Port 3 Configuration
ARC-1232/1532
56 ARC-1232/1532 Quick Reference Guide
Item
Option
Description
Serial Port
Enabled[Default],
Disabled
Enable or Disable Serial Port (COM).
3.6.2.5.4 Serial Port 4 Configuration
Item
Option
Description
Serial Port
Enabled[Default],
Disabled
Enable or Disable Serial Port (COM).
3.6.2.5.5 Serial Port 5 Configuration
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
57
Item
Option
Description
Serial Port
Enabled[Default],
Disabled
Enable or Disable Serial Port (COM).
3.6.2.6 H/W Monitor
3.6.2.7 S5 RTC Wake Settings
ARC-1232/1532
58 ARC-1232/1532 Quick Reference Guide
Item
Options
Description
Wake system from S5
Disabled[Default],
Fixed Time
Dynamic Time
Enable or disable System wake on alarm event. Select Fixed Time, system will wake on the hr::min::sec specified. Select Dynamic Time, System will wake on the current time + Increase minute(s).
3.6.2.8 Serial Port Console Redirection
Item
Options
Description
Console Redirection
Disabled[Default],
Enabled
Console Redirection Enable or Disable.
3.6.2.8.1 Legacy Console Redirection Settings
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
59
Item
Option
Description
Legacy Serial Redirection Port
COM1[Default],
Select a COM port to display redirection of Legacy OS and Legacy OPROM Messages.
3.6.2.9 CPU Configuration
Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
3.6.2.10 Intel TXT Configuration
ARC-1232/1532
60 ARC-1232/1532 Quick Reference Guide
3.6.2.11 SATA Configuration
Item
Options
Description
SATA Controller(s)
Enabled[Default]
Disabled,
Enable or disable SATA Device.
SATA Test Mode
Enabled
Disabled[Default],
Test Mode Enable/Disable (Loop Back).
Aggressive LPM Support
Enabled[Default]
Disabled
Enable PCH to aggressively enter link power state.
Port 1/2
Enabled[Default]
Disabled,
Enable or Disable SATA Port.
SATA Device Type
Hard Disk Drive [Default]
Solid State Drive
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
61
3.6.2.12 Network Stack Configuration
Item
Options
Description
Network Stack
Enabled
Disabled[Default]
Enable/Disable UEFI Network Stack.
3.6.2.13 CSM Configuration
ARC-1232/1532
62 ARC-1232/1532 Quick Reference Guide
Item
Options
Description
CSM Support
Enabled
Disabled[Default]
Enable/Disable CSM Support.
3.6.2.14 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item
Options
Description
Legacy USB Support
Enabled[Default]
Disabled
Auto
Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
XHCI Hand-off
Enabled[Default]
Disabled
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.
USB Mass Storage Driver Support
Enabled[Default]
Disabled
Enable/Disable USB Mass Storage Driver Support.
Port 60/64 Emulation
Enabled
Disabled[Default]
Enable I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes.
USB transfer time-out
1 sec 5 sec
10 sec
20 sec[Default]
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
10 sec
20 sec[Default]
30 sec 40 sec
USB mass storage device Start Unit command time-out.
Device power-up delay
Auto[Default]
Maximum time the device will take before it
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
63
Manual
properly reports itself to the Host Controller. ‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken form Hub descriptor.
hp v220w 1100
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Mass storage device emulation type. ‘AUTO’ enumerates devices according to their media format. Optical drives are emulated as ‘CDROM’, drives with no media will be emulated according to a drive type.
3.6.3 Chipset
3.6.3.1 System Agent (SA) Configuration
ARC-1232/1532
64 ARC-1232/1532 Quick Reference Guide
Item
Option
Description
VT-d
Enabled[Default]
Disabled
VT-d capability.
3.6.3.1.1 Graphics Configuration
Item
Option
Description
CH7511 EDID Panel Option
1024x768 24/1[Default]
800x600 18/1 1024x768 18/1 1366x768 18/1 1024x600 18/1 1280x800 18/1
1920x1200 24/2 1920x1080 18/2 1280x1024 24/2
1440x900 18/2
1600x1200 24/2
1366x768 24/1
1920x1080 24/2 1680x1050 24/2
Port1-EDP to LVDS (Chrotel 7511) Panel EDID Option.
Active LVDS (CH7511)
Enabled[Default]
Disabled
Active Internal LVDS (eDP->Ch7511­to-LVDS).
Brightness Control Method
BIOS[Default]
BR Button
VR
OS Driver
LVDS Brightness Control Method.
1.BIOS 2.Brightness Button
3.Variable Resistor 4.OS Driver.
LVDS Back Light PWM
00% 25% 50%
Select LVDS back light PWM duty.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
65
75%
100%[Default]
LVDS Back Light PWM
Frequency
200[Default]
300 400 500 700
1k 2k 3k
5k 10k 20k
Select LVDS back light PWM Frequency.
Onboard Touch Setting
Enabled[Default]
Disabled
Enable/Disable USB Touch.
3.6.3.1.2 Memory Configuration
Item
Option
Description
Max TOLUD
Dynamic[Default]
1GB/1.25GB/1.5GB/1.75GB
/2GB/2.25GB/2.5GB/2.75GB
Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller.
ARC-1232/1532
66 ARC-1232/1532 Quick Reference Guide
3.6.3.2 PCH-IO Configuration
Item
Option
Description
PCH LAN Controller
Disabled
Enabled[Default]
Enable or disable onboard NIC.
3.6.3.2.1 PCI Express Configuration
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
67
3.6.3.2.1.1 PCI Express Root Port5 (i210/211)
Item
Option
Description
PCI Express Root Port 5
Enabled[Default],
Disabled
Control the PCI Express Root Port.
ASPM Support
Disabled [Default],
L0s
L1
L0sL1
Auto
Set the ASPM Level: Force L0s – Force all links to L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM.
L1 Substates
Disabled
L1.1 L1.2
L1.1 & L1.2[Default],
PCI Express L1 Substates settings.
PCIe Speed
Auto[Default]
Gen1 Gen2 Gen3
Select PCI Express port speed.
ARC-1232/1532
68 ARC-1232/1532 Quick Reference Guide
3.6.3.2.1.2 PCI Express Root Port8 (B2B mPCIe)
Item
Option
Description
PCI Express Root Port 8
Enabled[Default],
Disabled
Control the PCI Express Root Port.
ASPM Support
Disabled [Default],
L0s
L1
L0sL1
Auto
Set the ASPM Level: Force L0s – Force all links to L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM.
L1 Substates
Disabled
L1.1 L1.2
L1.1 & L1.2[Default],
PCI Express L1 Substates settings.
PCIe Speed
Auto[Default]
Gen1 Gen2 Gen3
Select PCI Express port speed.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
69
3.6.3.2.1.3 PCI Express Root Port12 (mPCIe)
Item
Option
Description
PCI Express Root Port 12
Enabled[Default],
Disabled
Control the PCI Express Root Port.
ASPM Support
Disabled [Default],
L0s
L1
L0sL1
Auto
Set the ASPM Level: Force L0s – Force all links to L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM.
L1 Substates
Disabled
L1.1 L1.2
L1.1 & L1.2[Default],
PCI Express L1 Substates settings.
PCIe Speed
Auto[Default]
Gen1 Gen2 Gen3
Select PCI Express port speed.
ARC-1232/1532
70 ARC-1232/1532 Quick Reference Guide
3.6.3.2.2 USB Configuration
Item
Option
Description
USB Precondition
Enabled
Disabled[Default],
Precondition work on USB host controller and root ports for faster enumeration.
XHCI Disable Compliance Mode
FALSE[Default],
TRUE
Option to disable Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode.
3.6.3.2.3 HD Audio Configuration
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
71
Item
Option
Description
HD Audio
Disabled
Enabled
Auto[Default],
Control Detection of the HD-Audio device. Disable = HDA will be unconditionally disabled Enabled = HDA will be unconditionally enabled Auto = HDA will be enabled if present, disabled otherwise.
Amplifier Gain
20db[Default],
26db 32db 36db
Amplifier Gain.
3.6.4 Security
Administrator Password Set setup Administrator Password
User Password Set User Password
ARC-1232/1532
72 ARC-1232/1532 Quick Reference Guide
3.6.4.1 Secure Boot menu
Item
Option
Description
Secure Boot
Disabled[Default]
Enabled
Secure Boot can be enabled if 1.System running in User mode with enrolled Platform Key(PK) 2.CSM function is disabled.
Secure Boot Mode
Standard
Custom[Default]
Secure Boot mode selector. ‘Custom’ Mode enables users to change Image Execution policy and manage Secure Boot Keys.
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
73
3.6.4.1.1 Key Management
Item
Option
Description
Provision Factory Default keys
Enabled,
Disabled[Default]
Install Factory default Secure Boot Keys when System is in Setup Mode.
3.6.5 Boot
ARC-1232/1532
74 ARC-1232/1532 Quick Reference Guide
Item
Option
Description
Setup Prompt Timeout
1~ 65535
Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
On[Default]
Off
Select the Keyboard NumLock state
Quiet Boot
Disabled[Default]
Enabled
Enables or disables Quiet Boot option
Fast Boot
Disabled[Default]
Enabled
Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options.
Boot Option #1
Set the system boot order.
3.6.6 Save and exit
Quick Reference Guide
ARC-1232/1532 Quick Reference Guide
75
3.6.6.1 Save Changes and Reset
Reset the system after saving the changes.
3.6.6.2 Discard Changes and Reset
Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller.
3.6.6.3 Restore Defaults
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.
3.6.6.4 Launch EFI Shell from filesystem device
Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use