Part No. E2017A120A1R
APC-2132
21.5" 6th Gen Intel® Core™ i7/i5/i3/Celeron Expantable Ultra
light Multi-Touch Fanless Panel PC
Quick Reference Guide
2nd Ed – 31 October 2017
Copyright Notice
Copyright 2017 Avalue Technology Inc., ALL RIGHTS RESERVED.
APC-2132
2 APC-2132 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
Quick Reference Guide
APC-2132 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................ 5
1.1 Safety Precautions .................................................................................................... 5
1.2 Packing List ............................................................................................................... 5
1.3 System Specifications ............................................................................................... 6
1.4 System Overview ...................................................................................................... 9
1.4.1 Front View ................................................................................................................................ 9
1.4.2 Rear View .............................................................................................................................. 10
1.5 System Dimensions ................................................................................................ 11
2. Hardware Configuration ....................................................................................... 12
2.1 APC-2132 connector mapping ................................................................................ 13
2.1.1 Serial port 1 connector (COM1) ............................................................................................. 13
2.1.2 Serial port 2 connector (COM2) ............................................................................................. 13
2.2 Storage Installation ................................................................................................. 14
2.3 ARC-SKLU Overviews ............................................................................................ 15
2.4 ARC-SKLU Jumper and Connector list ................................................................... 16
2.5 ARC-SKLU Jumpers & Connectors settings ........................................................... 18
2.5.1 Clear CMOS (JCOMS1) ........................................................................................................ 18
2.5.2 Serial port 1/2 pin9 signal select (JRI1/JRI2) ........................................................................ 18
2.5.3 LCD backlight brightness adjustment (JBKLSEL1) ............................................................... 19
2.5.4 AT/ATX auto power on select (JAT1) .................................................................................... 19
2.5.5 Serial port 1 in RS-232/422/485 mode (JCOM1_SEL1)........................................................ 20
2.5.6 LCD Inverter connector (JBKL1) ........................................................................................... 20
2.5.7 On-board header for USB2.0 (JUSB1) .................................................................................. 21
2.5.8 On-board header for USB2.0 (JUSB2) .................................................................................. 21
2.5.9 On-board header for USB2.0 (JUSB3) .................................................................................. 22
2.5.10 Battery connector (JBAT1) .................................................................................................... 22
2.5.11 LVDS connector (JLVDS1) .................................................................................................... 23
2.5.12 Speaker_R (JSPR1) .............................................................................................................. 24
2.5.13 Speaker_L (JSPL1) ............................................................................................................... 24
2.5.14 SPI connector (JSPI1) ........................................................................................................... 25
2.5.15 EC Debug connector (JEC1) ................................................................................................. 25
2.5.16 LCD backlight brightness adjustment (JBLK_CTRL1) .......................................................... 26
2.5.17 UPS-GPIO connector (JUPS1) .............................................................................................. 26
2.5.18 B2B connector (JB2B1) ......................................................................................................... 27
APC-2132
4 APC-2132 Quick Reference Guide
2.5.19 SATA Power connector (SATAPW1)..................................................................................... 28
2.5.20 General purpose I/O connector (JGPIO1) ............................................................................. 28
2.5.21 Miscellaneous setting connector (JFP2) ............................................................................... 29
2.5.22 LED connector (JLED1) ......................................................................................................... 29
2.5.23 Serial port 1 connector (COM1) ............................................................................................. 30
2.6 ARC-SKLU DB-B Overviews ................................................................................... 31
2.7 ARC-SKLU DB-B Jumper and Connector list .......................................................... 32
2.8 ARC-SKLU DB-B Jumpers & Connectors settings .................................................. 33
2.8.1 Serial port 1 in RS-232/422/485 mode (JCOMSEL1) ............................................................ 33
2.8.2 Audio connector (JMIC1) ....................................................................................................... 33
2.8.2.1 Signal Description – Audio connector (JMIC1)...................................................................................... 33
2.8.3 Serial port 1 connector (JCOM1) ........................................................................................... 34
2.8.4 RS-422/RS-485 Termination Resistance connector (JCOMS1) ........................................... 34
2.8.5 B2B connector (B2B1) ........................................................................................................... 35
2.8.6 USB connector 2 (JUSB2) ..................................................................................................... 36
Quick Reference Guide
APC-2132 Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x 21.5" 6th Gen Intel® Core™ i7/i5/i3/Celeron Expantable Ultra light
Multi-Touch Fanless Panel PC
1 x 19V/3.78A 72W power adapter
1 x power cord
APC-2132
6 APC-2132 Quick Reference Guide
1.3 System Specifications
Component
Mother Board
SBC Share with ARC-SKLU
(P/N: E9697ASKL05R i7-6600U/ 09R i5-6300U/ 10R i3-6100U, 11R Celeron
3955U)
CPU
Intel Core i/ Celeron BGA CPU (15W)
6th Gen Intel® Core™ i7-6600U, 2-Core, 2.6GHz processor
6th Gen Intel® Core™ i5-6300U, 2-Core, 2.4GHz processor
6th Gen Intel® Core™ i3-6100U, 2-Core, 2.3GHz processor
6th Gen Intel® Celeron ® 3955U, 2-Core Processor
CPU Cooler (Type)
Heatsink
Memory
One 260-pin SODIMM Socket Up to 16GB DDR4 2133 SDRAM
Power Supply
DC in
Adapter
AC/DC adapter 19V/3.78A
BCC-ADP-072N-01R
Speaker
0.5W *2
Camera
By optional
Wireless LAN
By optional ( mini PCIe module)
Bluetooth
By optional ( mini PCIe module)
Operating System
Support Win 7/8/10, Linux
Expansion Card
1* full size mini PCIe slot
1* half size mini PCIe slot (by IET module)
Storage
Hard Disk Drive
By SATA port
Solid State Drive
By SATA port
Panel
LCD Panel
21.5” AUO T215HVN01 (E96892X5022R):15.2W
Or
AUO G215HVN01.0 (E9689421500R): 23W
LCD Control Board
LED driving board: E968X000104R
(only for T215HVN01)
Touch Screen
21.5” PCAP multi touch
Touch Controller
EETI EXC3188 (come with touch)
Others
Front power button & program buttons
(daughter board: E9697173ME1R)
External I/O
Serial Port
2 x DB-9 COM (COM1 RS-232/422/485, selectable by Jumper, RS-485
Quick Reference Guide
APC-2132 Quick Reference Guide
7
supports Auto Flow, Pin-9 selected by Ring/+5V/+12V, COM2 RS-232 only)
USB Port
4 x USB3.0 (2 x Double deck)
2 x USB2.0 (by IET module)
Video Port
HDMI (by IET module)
Audio Port
1 x Line out (by IET module)
1 x Mic in (by IET module)
LAN Port
1 x I219LM PHY, 1 x Intel I211AT GbE controller
Wireless LAN Antenna
Optional Internal antenna*2
Indicator Light
HDD LED, Power LED
Others
NA
Mechanical
Power Type
DC in +12V ~ 26V
Power Connector
Type
Lockable DC jack
Dimension
539.6 x 342.6 x 45.5mm
Weight
6.2kg
Color
Black plastic
Fanless
Yes
OS Support
Windows 7/8/10, Linux
Reliability
EMI Test
CE/ FCC class B
Dust and Rain Test
Front Panel IP65
Vibration Test
Ramdom Vibration Operation
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.00454G²/Hz , 1.5 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 System condition : operation mode
6 Test curve
Sine Vibration Test
Reference IEC60068-2-6 Testing procedures
Test Fc : Vibration sinusoidal
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test axis : X,Y and Z axis
5 Test time :10 min. each axis
APC-2132
8 APC-2132 Quick Reference Guide
6 System condition : Non-Operating mode
7 Test curve
Package Vibration Test:
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.026G²/Hz , 2.16 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 Test curve
Mechanical Shock
Test
With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms
Drop Test
Package drop test
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed
Test Ea : Drop Test
1 Test phase : One corner, three edges, six faces
2 Test high :
3 Package weight :
4 Test drawing
Operating
Temperature
0 ~ 40 degree
Operating Humidity
0 ~ 90% Relative Humidity, Non-condensing
Storage Temperature
-20 ~ 60 degree
Note: Specifications are subject to change without notice.
Quick Reference Guide
APC-2132 Quick Reference Guide
9
1.4 System Overview
1.4.1 Front View
Note1:
Continue press 4 sec to disable and enable touch function.
Power on/off
Brightness
Up/down
Volume
Up/down
Touch enable/disable *Note1
APC-2132
10 APC-2132 Quick Reference Guide
1.4.2 Rear View
Connectors
Label
Function
Note
COM1/2
Serial port 1/2 connector
DB-9 male connector
DC in
DC-in power connector
HDD
HDD LED
PWR
Power LED
LAN1/2
RJ-45 Ethernet 1/2
Mic-in
Mic-in audio jack
Line-out
Line-out audio jack
Reset
Rest button
USB
2 x USB 2.0 connector
4 x USB 3.0 connector
HDMI
HDMI connector
Quick Reference Guide
APC-2132 Quick Reference Guide
11
1.5 System Dimensions
(Unit: mm)
APC-2132
12 APC-2132 Quick Reference Guide
2. Hardware
Configuration
For advanced information, please refer to:
1- ARC-SKLU and ARC-SKLU DB-B included in this manual.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
Quick Reference Guide
APC-2132 Quick Reference Guide
13
2.1 APC-2132 connector mapping
2.1.1 Serial port 1 connector (COM1)
RS-485
Signal
PIN
PIN
Signal
DATA-
1 6 NC
DATA+
2 7 NC
NC
3 8 NC
NC
4 9 NC
GND
5
RS-232
Signal
PIN
PIN
Signal
DCD
1 6 DSR
RXD
2 7 RTS
TXD
3 8 CTS
DTR
4 9 RI
GND
5
RS-422
Signal
PIN
PIN
Signal
TxD-
1 6 NC
TxD+
2 7 NC
RxD+
3 8 NC
RxD-
4 9 NC
GND
5
2.1.2 Serial port 2 connector (COM2)
RS-232
Signal
PIN
PIN
Signal
DCD
1 6 DSR
RXD
2 7 RTS
TXD
3 8 CTS
DTR
4 9 RI
GND
5
APC-2132
14 APC-2132 Quick Reference Guide
2.2 Storage Installation
Step 1. Remove 2 screws to release the chassis cover, and remove it.
Step 2. Insert the HDD back and fasten 2 screws.
Quick Reference Guide
APC-2132 Quick Reference Guide
15
2.3 ARC-SKLU Overviews
APC-2132
16 APC-2132 Quick Reference Guide
2.4 ARC-SKLU Jumper and Connector list
Jumpers
Label
Function
Note
JCOMS1
Clear CMOS
3 x 1 header, pitch 2.00mm
JRI1/2
Serial port 1/2 pin9 signal select
3 x 2 header, pitch 2.00mm
JCOM1_SEL1
Serial port 1 in RS-232/422/485 mode
4 x 3 header, pitch 2.00mm
JBKLSEL1
LCD backlight brightness adjustment
3 x 1 header, pitch 2.00mm
JAT1
AT/ATX auto power on select
3 x 1 header, pitch 2.00mm
Connectors
Label
Function
Note
SODIMM1
1 x 260-Pin DDR4 2133MHz SO-DIMM
JBKL1
LCD Inverter connector
5 x 1 wafer, pitch 2.00mm
COM1/2
Serial port 1/2 connector
D-sub 9 pin, male
JSPR1
Speaker_R
2 x 1 wafer, pitch 2.00mm
JSPL1
Speaker_L
2 x 1 wafer, pitch 2.00mm
JB2B1
B2B connector
40 x 2 wafer, pitch 0.80mm
JBKLCTL1
LCD backlight brightness adjustment
3 x 2 header, pitch 2.00mm
LED1
HDD/Power LED indicator
JLED1
LED connector
3 x 1 header, pitch 2.00mm
JFP2
Miscellaneous setting connector
5 x 2 wafer, pitch 2.00 mm
JLVDS1
LVDS connector
DIN 40-pin wafer, pitch 1.25mm
USB1/2
USB connector 1/2
JUSB1
On-board header for USB2.0
5 x 1 wafer, pitch 2.00mm
JUSB2
On-board header for USB2.0
5 x 2 wafer, pitch 2.00mm
JUSB3
On-board header for USB2.0
5 x 1 wafer, pitch 2.00mm
LAN1/2
RJ-45 Ethernet 1/2
MPCIE1
Mini-PCIe connector
JBAT1
Battery connector
2 x 1 wafer, pitch 1.25mm
JGPIO1
General purpose I/O connector
6 x 2 wafer, pitch 2.00mm
JUPS1
UPS-GPIO connector
3 x 2 header, pitch 2.00mm
JPWR1
Power connector
JSPI1
SPI connector
4 x 2 header, pitch 2.00mm
JEC1
EC Debug connector
2 x 1 header, pitch 2.00 mm
Quick Reference Guide
APC-2132 Quick Reference Guide
17
SATA1
Serial ATA connector
SATAPW1
SATA Power connector
2 x 1 wafer, pitch 2.00mm
APC-2132
18 APC-2132 Quick Reference Guide
2.5 ARC-SKLU Jumpers & Connectors settings
2.5.1 Clear CMOS (JCOMS1)
*Default
Protect*
Clear CMOS
2.5.2 Serial port 1/2 pin9 signal select (JRI1/JRI2)
* Default
Ring*
+5V
+12V
JRI1
JRI2
Quick Reference Guide
APC-2132 Quick Reference Guide
19
2.5.3 LCD backlight brightness adjustment (JBKLSEL1)
* Default
PWM Mode*
DC Mode
2.5.4 AT/ATX auto power on select (JAT1)
* Default
Power on by power button*
Auto power on
APC-2132
20 APC-2132 Quick Reference Guide
2.5.5 Serial port 1 in RS-232/422/485 mode (JCOM1_SEL1)
* Default
RS232*
RS422
RS485
PIN
Signal
PIN
Signal
PIN
Signal
12
422RX1-
11
COM1-4
10
NDTRA#
9
485_422TX1+
8
COM1-2
7
NRXDA
6
422RX1+
5
COM1-3
4
NTXDA
3
485_422TX1-
2
COM1-1
1
NDCDA#
Note:
This connector is available after modify the mode of COM1 in
BIOS setting.
2.5.6 LCD Inverter connector (JBKL1)
Signal
PIN
+5V
5
LVDS_BKLT_CTL
4
LVDS_BKLT_EN
3
GND
2
+12V
1
Quick Reference Guide
APC-2132 Quick Reference Guide
21
2.5.7 On-board header for USB2.0 (JUSB1)
Signal
PIN
+5VSB
1
USB-
2
USB+
3
GND
4
GND
5
2.5.8 On-board header for USB2.0 (JUSB2)
Signal
PIN
PIN
Signal
+5VSB
2 1 +5VSB
USB-
4 3 USB-
USB+
6 5 USB+
GND
8 7 GND
GND
10 9 GND
APC-2132
22 APC-2132 Quick Reference Guide
2.5.9 On-board header for USB2.0 (JUSB3)
Signal
PIN
+5VSB
1
USB-
2
USB+
3
GND
4
GND
5
2.5.10 Battery connector (JBAT1)
Signal
PIN
+RTCBAT
1
GND
2
Quick Reference Guide
APC-2132 Quick Reference Guide
23
2.5.11 LVDS connector (JLVDS1)
Signal
PIN
PIN
Signal
+5V
2 1 +3.3V
+5V
4 3 +3.3V
NC
6 5 NC
GND
8 7 GND
LVDS_DATA0_P
10 9 LVDS_DATA1_P
LVDS_DATA0_N
12
11
LVDS_DATA1_N
GND
14
13
GND
LVDS_DATA2_P
16
15
LVDS_DATA3_P
LVDS_DATA2_N
18
17
LVDS_DATA3_N
GND
20
19
GND
LVDS_DATA4_P
22
21
LVDS_DATA5_P
LVDS_DATA4_N
24
23
LVDS_DATA5_N
GND
26
25
GND
LVDS_DATA6_P
28
27
LVDS_DATA7_P
LVDS_DATA6_N
30
29
LVDS_DATA7_N
GND
32
31
GND
LVDS_CLK1_P
34
33
LVDS_CLK2_P
LVDS_CLK1_N
36
35
LVDS_CLK2_N
GND
38
37
GND
+12V
40
39
+12V
APC-2132
24 APC-2132 Quick Reference Guide
2.5.12 Speaker_R (JSPR1)
Signal
PIN
SPK_R-
2
SPK_R+
1
2.5.13 Speaker_L (JSPL1)
Signal
PIN
SPK_L-
2
SPK_L+
1
Quick Reference Guide
APC-2132 Quick Reference Guide
25
2.5.14 SPI connector (JSPI1)
Signal
PIN
PIN
Signal
+3.3VSB
1 2 GND
SPI0_CS0#
3 4 SPI_CLK
SPI_SO
5 6 SPI_SI
HOLD#
7
2.5.15 EC Debug connector (JEC1)
Signal
PIN
EC_SMCLK_DEBUG
1
EC_SMDAT_DEBUG
2
APC-2132
26 APC-2132 Quick Reference Guide
2.5.16 LCD backlight brightness adjustment (JBLK_CTRL1)
PIN
Signal
Note
1-2
BLK_VR_MOD
VR must select 10K/1%
3-4
BLK_BRI_UP
Low pulse button for
backlight brighter
5-6
BLK_BRI_DN
Low pulse button for
backlight dim
2.5.17 UPS-GPIO connector (JUPS1)
Signal
PIN
PIN
Signal
OFF_PC#
1 2 SMB_CLK
GND
3 4 SMB_DATA
GND
5 6 GND
Quick Reference Guide
APC-2132 Quick Reference Guide
27
2.5.18 B2B connector (JB2B1)
Signal
PIN
PIN
Signal
GND
1
41
GND
GND
2
42
GND
+12V
3
43
GND
+12V
4
44
GND
GND
5
45
GND
LPC_SERIRQ
6
46
+5VSB
LPC_LFRAME#
7
47
+5VSB
CLK3_LPC_B2B
8
48
+5VSB
LPC_AD0
9
49
+5VSB
LPC_AD1
10
50
+5VSB
Signal
PIN
PIN
Signal
LPC_AD2
11
51
GND
LPC_AD3
12
52
USB_PP8
PS_ON_B2B
13
53
USB_PN8
PLT_RST#
14
54
GND
PCH_SLP_S3#
15
55
SMBCLK
HDMI_HPD
16
56
SMBDATA
GND
17
57
GND
HDMI1_CTRL_CLK
18
58
BOARD_ID
HDMI1_CTRL_DAT
19
59
PCIEUSB3_PONRSTB
GND
20
60
PCIEUSB3_SMIB_INT#
HDMI1_TXN_2
21
61
B2BPCIE_WAKE#
HDMI1_TXP_2
22
62
RST_B2BPCIE#
GND
23
63
B2BPCIE_CLK_REQ#
HDMI1_TXN_1
24
64
GND
HDMI1_TXP_1
25
65
PCIE_TXN8
GND
26
66
PCIE_TXP8
HDMI1_TXN_0
27
67
GND
HDMI1_TXP_0
28
68
PCIE_RXN8
GND
29
69
PCIE_RXP8
HDMI1_CLKN
30
70
GND
HDMI1_CLKP
31
71
CLK_B2BPCIE_N2
GND
32
72
CLK_B2BPCIE_P2
GND
33
73
GND
MIC_RIN
34
74
GND
MIC_LIN
35
75
MIC1_JD
GND
36
76
GND
LINEOUT1_JD
37
77
LINE1_JD
LINEOUT_R
38
78
LINE1_RIN
LINEOUT_L
39
79
LNE1_LIN
GND
40
80
GND
APC-2132
28 APC-2132 Quick Reference Guide
2.5.19 SATA Power connector (SATAPW1)
Signal
PIN
GND
1
+5V
2
2.5.20 General purpose I/O connector (JGPIO1)
Signal
PIN
PIN
Signal
+3.3V
11
12
GND
SMB_DATA
9
10
SMB_CLK
DIO_GP23
7 8 DIO_GP13
DIO_GP22
5 6 DIO_GP12
DIO_GP21
3 4 DIO_GP11
DIO_GP20
1 2 DIO_GP10
Quick Reference Guide
APC-2132 Quick Reference Guide
29
2.5.21 Miscellaneous setting connector (JFP2)
Signal
PIN
PIN
Signal
FP_LED1
9
10
FP_LED2
PWRBTN
7 8 LED_ONOFF#
BRI_DN#
5 6 BRI_UP#
VOL_DN#
3 4 VOL_UP#
GND
1 2 +3V
2.5.22 LED connector (JLED1)
Signal
PIN
+5VSB
1
LED_BOARD_EN
2
GND
3
APC-2132
30 APC-2132 Quick Reference Guide
2.5.23 Serial port 1 connector (COM1)
Note:
RS-232 mode is default, RS-422 and RS-485 changed
setting by jumper(JCOM_SEL1).
RS-232
Signal
PIN
PIN
Signal
DCD#
1 6 DSR#
RXD
2 7 RTS#
TXD
3 8 CTS#
DTR#
4 9 RI#
GND
5
RS-422
Signal
PIN
PIN
Signal
422_Tx-
1 6 NC
422_Tx+
2 7 NC
422_Rx+
3 8 NC
422_Rx-
4 9 NC
GND
5
RS-485
Signal
PIN
PIN
Signal
485_Tx-
1 6 NC
485_Tx+
2 7 NC
NC
3 8 NC
NC
4 9 NC
GND
5
Quick Reference Guide
APC-2132 Quick Reference Guide
31
2.6 ARC-SKLU DB-B Overviews
APC-2132
32 APC-2132 Quick Reference Guide
2.7 ARC-SKLU DB-B Jumper and Connector list
Jumpers
Label
Function
Note
JCOMSEL1
Serial port 1 in RS-232/422/485 mode
3 x 2 header, pitch 2.00mm
Connectors
Label
Function
Note
JCOM1
Serial port 1 connector
5 x 2 header, pitch 2.00mm
JCOMS1
RS-422/RS-485 Termination Resistance
connector
4 x 2 header, pitch 2.00mm
B2B1
B2B connector
40 x 2 wafer, pitch 0.80mm
HDMI1
HDMI connector
MIC1
Mic-in audio jack
JMIC1
Audio connector (Reserved)
6 x 2 wafer, pitch 2.00mm
LINOUT1
Line-out audio jack
MINI_PCIE1
Mini-PCIe connector
USB1
USB connector x 2
JUSB1
USB connector 1 (Reserved)
5 x 2 wafer, pitch 2.00mm
JUSB2
USB connector 2
5 x 1 wafer, pitch 2.00mm
Quick Reference Guide
APC-2132 Quick Reference Guide
33
2.8 ARC-SKLU DB-B Jumpers & Connectors settings
2.8.1 Serial port 1 in RS-232/422/485 mode (JCOMSEL1)
*Default
RS232*
RS422
RS485
2.8.2 Audio connector (JMIC1)
Signal
PIN
PIN
Signal
GND
11
12
MIC_JD
LINEIN_JD
9
10
LINEOUT_JD
MIC_L
7 8 MIC_R
LINE_L_IN
5 6 LINE_R_IN
GND
3 4 GND
LINE_L_OUT
1 2 LINE_R_OUT
2.8.2.1 Signal Description – Audio connector (JMIC1)
Signal
Signal Description
LINEOUT_JD
AUDIO Out(ROUT/LOUT) sense pin
MIC_JD
MIC IN (MIC_RIN/LIN) sense pin
Note:
Line in function unavailable.
APC-2132
34 APC-2132 Quick Reference Guide
2.8.3 Serial port 1 connector (JCOM1)
Signal
PIN
PIN
Signal
NC
10 9 NRI1#
NCTS1#
8 7 NRTS1#
NDSR1#
6 5 GND
NDTR1#
4 3 NTXD1
NRXD1
2 1 NDCD1#
2.8.4 RS-422/RS-485 Termination Resistance connector (JCOMS1)
Signal
PIN
PIN
Signal
GND
8 7 NDTR1#
GND
6 5 NDCD1#
+5V
4 3 NRXD1
+5V
2 1 NTXD1
Quick Reference Guide
APC-2132 Quick Reference Guide
35
2.8.5 B2B connector (B2B1)
Signal
PIN
PIN
Signal
GND
1
41
GND
GND
2
42
GND
NC
3
43
GND
NC
4
44
GND
GND
5
45
GND
LPC_SERIRQ
6
46
+5VSB
LPC_FRAME#
7
47
+5VSB
LPC_CLK
8
48
+5VSB
LPC_AD0
9
49
+5VSB
LPC_AD1
10
50
+5VSB
Signal
PIN
PIN
Signal
LPC_AD2
11
51
GND
LPC_AD3
12
52
USB_DP_A
PS_ON
13
53
USB_DN_A
PLT_RST#
14
54
GND
NC
15
55
SMBDATA
HDMI_HPD0
16
56
SMBCLK
GND
17
57
GND
HDMI1_CTRLCLK
18
58
BOARD_ID
HDMI1_CTRLDATA
19
59
PONRSTB
GND
20
60
NC
HDMI1_TXN2
21
61
MPCIE_WAKE#
HDMI1_TXP2
22
62
MPCIE_RESET#
GND
23
63
MPCIE_CLKREQ#
HDMI1_TXN1
24
64
GND
HDMI1_TXP1
25
65
MPCIE1_TX-
GND
26
66
MPCIE1_TX+
HDMI1_TXN0
27
67
GND
HDMI1_TXP0
28
68
MPCIE1_RX-
GND
29
69
MPCIE1_RX+
HDMI1_CLK_N
30
70
GND
HDMI1_CLK_P
31
71
MPCIE_CLK-
GND
32
72
MPCIE_CLK+
GND
33
73
GND
MIC_R
34
74
GND
MIC_L
35
75
MIC_JD
GND
36
76
GND
LINEOUT_JD
37
77
LINEIN_JD
LINE_R_OUT
38
78
LINE_R_IN
LINE_L_OUT
39
79
LINE_L_IN
GND
40
80
GND
APC-2132
36 APC-2132 Quick Reference Guide
2.8.6 USB connector 2 (JUSB2)
Signal
PIN
USBVCC2
1
USB_DN_R_3
2
USB_DP_R_3
3
GND
4
GND
5
Loading...