SEPC-CDD2
Fanless Intel® Atom™ D2550 with Intel® NM10 Express
Chipset Tiny Box PC
Quick Reference Guide
1st Ed – 02 February 2015
Copyright Notice
Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED.
Part No. E2017SED2A0R
SEPC-CDD2
FCC Statement
Notice
Copyright Notice
Trademark Acknowledgement
Disclaimer
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Brand and product names are trademarks or registered trademarks of their respective
owners.
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
2 SEPC-CDD2 Quick Reference Guide
Quick Reference Guide
3
Life Support Policy
A Message to the Customer
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into body, or (b) support or sustain life and
whose failure to perform, when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in
significant injury to the user.
2. A critical component is any component of a life support device or system
whose failure to perform can be reasonably expected to cause the failure
of the life support device or system, or to affect its safety or effectiveness.
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
Content
1. Getting Started ............................................................................................................ 5
1.1 Safety Precautions ................................................................................................ 5
1.2 Packing List ........................................................................................................... 5
1.3 System Specifications ........................................................................................... 6
1.4 System Overview ................................................................................................... 8
1.4.1 Front View .................................................................................................................................... 8
1.4.2 Rear View ..................................................................................................................................... 8
1.5 System Dimensions ............................................................................................. 10
2. Hardware Configuration ........................................................................................... 11
2.1 SEPC-CDD2 connector mapping ........................................................................ 12
2.1.1 Serial port connector (COM) ...................................................................................................... 12
2.1.2 VGA connector (VGA) ................................................................................................................ 12
2.1.3 Gigabit LAN (RJ-45) connector (LAN) ....................................................................................... 13
2.2 Installing Hard Disk & Memory ............................................................................ 14
4 SEPC-CDD2 Quick Reference Guide
Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x SEPC-CDD2 Fanless Intel® Atom™ D2550 with Intel® NM10
Express Chipset Tiny Box PC
1 x DVD-ROM contains the followings:
— Driver Utility
Other major components include the followings:
— Adapter X 1
— Power cord X 1
— Rubber x 4
— Screws
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
System
CPU
Onboard Intel® Atom™ Processor D2550 (1M Cache, 1.86 GHz)
BIOS
AMI 16MBit SPI BIOS
System Chipset
Intel® NM10 Express Chipset
I/O Chip
Nuvoton NCT5577D
System Memory
One 204-pin DDR3 1066/1333MHZ SO-DIMM socket, supports up to 4GB Max
Storage
Support 2.5” Driver Bay
Watchdog Timer
Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min./step
H/W Status
Monitor
Monitoring CPU & System Temperature and Voltage
Expansion
1 x Mini PCI-e socket
*Mini PCI-e and m-SATA SSD switch through Jumper
External I/O
USB port
4 x USB 2.0
COM port
1 x RS-232 port (Pin 9 without power)
LAN port
1 x RJ45
VGA port
1 x VGA
HDMI port
1 x HDMI
SD card
1 x SD card socket
Audio port
1 x Line-out, 1 x Mic-in
DC Jack
1 x DC Jack 2.5mm connector
WiFi
Optional
Others
1 x Power on/off with Power LED button
1 x CIR for remote control
2 x SMA connector (optional)
1 x 4bit GPIO
Display
Chipset
Integrated Intel® Graphics Media Accelerator Supports dual display
Resolution
VGA: 2560 x 1600/ HDMI: 1920 x 1080
Dual Display
VGA + HDMI
Audio
Audio Codec
Realtek ALC661 HD Audio Decoding controller supports 2-CH
Audio Interface
Line-out, Mic-in
Ethernet
LAN Chip
1 x Realtek RT8111E PCI-e Gigabit Ethernet
Ethernet Interface
10/ 100/ 1000 Base-Tx Gigabit Ethernet
1.3 System Specifications
6 SEPC-CDD2 Quick Reference Guide
Quick Reference Guide
7
SIM card
SIM card
1x SIM Card socket
SD card socket
SD card socket
1 x SD Card socket
Environment
&Mechanical
Power Type
12V 5A 60W adapter
Operating Temp.
0 ~ 45°C (32 ~ 113°F), (w/SSD, mSATA), ambient w/ air flow
0 ~ 40°C (32 ~ 104°F), (w/HDD), ambient w/ air flow
Storage Temp
-20 ~ 75°C (-4 ~ 167°F) w/SSD
-20 ~ 65°C ( -4 ~ 149°F )w/HDD
Operating Humidity
0 ~ 90% Relative Humidity, Non-condensing
Size (L x W)
180mm x 122mm x 55.5 mm
Note: Specifications are subject to change without notice.
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
Connectors
Label
Function
Note
Power Button
Power on button
HDD LED
HDD LED indicator
CIR
Consumer IR
USB
2 X USB 2.0 Type A connector
SD Card Socket
SD/MS/MMC socket
Connectors
Label
Function
Note
COM
Serial port connector
DB-9 male connector
DC-in
DC power-in connector
HDMI
HDMI connector
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
8 SEPC-CDD2 Quick Reference Guide
Quick Reference Guide
9
Line-out
Line-out jack
Mic-in
Microphone-in audio jack
LAN
Gigabit LAN (RJ-45) connector
USB
2 X USB 2.0 Type A connector
VGA
VGA connector
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
(Unit: mm)
1.5 System Dimensions
Note: VESA Bracket optional
10 SEPC-CDD2 Quick Reference Guide
11
2. Hardware
Configuration
Please refer to ENX-CDD User’s Manual for advanced information.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
Quick Reference Guide
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
Signal
PIN
PIN
Signal
DCD#
1 6 DSR#
RXD
2 7 RTS#
TXD
3 8 CTS#
DTR#
4 9 RI#
GND
5
PIN
Signal
PIN
Signal
PIN
Signal
1 R 6
GND
11
NC 2 G 7 GND
12
DATA 3 B 8 GND
13
HSYNC
4
NC 9 NC
14
VSYNC
5
NC
10
NC
15
CLK
2.1 SEPC-CDD2 connector mapping
2.1.1 Serial port connector (COM)
2.1.2 VGA connector (VGA)
12 SEPC-CDD2 Quick Reference Guide
13
Note:
This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub.
Refer to the table below for the LAN port LED
indications.
Speed
Status
Speed
Description
ACT/Link
Status
ACT/Link
Description
OFF
10Mbps
connection
OFF
Disconnection
Green
100Mbps
connection
Yellow
On
Linked
Green
1Gbps
connection
Yellow
Blinking
Data activity
2.1.3 Gigabit LAN (RJ-45) connector (LAN)
Quick Reference Guide
SEPC-CDD2 Quick Reference Guide
SEPC-CDD2
2.2 Installing Hard Disk & Memory
Step1. Unfasten 4 screws to remove the back cover.
14 SEPC-CDD2 Quick Reference Guide
Quick Reference Guide
15
Step2. Insert the HDD and fasten 4 screws.
Step3. Assemble the back cover back as step 2 to step 1.
SEPC-CDD2 Quick Reference Guide
Loading...