SEPC-BYT
Fanless Intel® Celeron® Processor J1900 Tiny Box PC
Quick Reference Guide
1st Ed – 09 February 2015
Copyright Notice
Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED.
Part No. E2017SEYTA0R
SEPC-BYT
FCC Statement
Notice
Copyright Notice
Trademark Acknowledgement
Disclaimer
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Brand and product names are trademarks or registered trademarks of their respective
owners.
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
these products are free from patent, copyright, or mask work right infringement, unless
2 SEPC-BYT Quick Reference Guide
Quick Reference Guide
3
Life Support Policy
A Message to the Customer
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into body, or (b) support or sustain life and
whose failure to perform, when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in
significant injury to the user.
2. A critical component is any component of a life support device or system
whose failure to perform can be reasonably expected to cause the failure
of the life support device or system, or to affect its safety or effectiveness.
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
SEPC-BYT Quick Reference Guide
SEPC-BYT
Content
1. Getting Started ............................................................................................................ 5
1.1 Safety Precautions ................................................................................................ 5
1.2 Packing List ........................................................................................................... 5
1.3 System Specifications ........................................................................................... 6
1.4 System Overview ................................................................................................... 8
1.4.1 Front View .................................................................................................................................... 8
1.4.2 Rear View ..................................................................................................................................... 8
1.5 System Dimensions ............................................................................................. 10
1.5.1 Front & Top view ........................................................................................................................ 10
2. Hardware Configuration ........................................................................................... 11
2.1 SEPC-BYT connector mapping ........................................................................... 12
2.1.1 VGA connector (VGA) ................................................................................................................ 12
2.1.2 Serial port connector (COM1) .................................................................................................... 12
2.1.3 Gigabit LAN (RJ-45) connector (LAN) ....................................................................................... 13
2.2 Installing Hard Disk & Memory ............................................................................ 14
4 SEPC-BYT Quick Reference Guide
Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x SEPC-BYT Fanless Intel® Celeron® Processor J1900 Tiny Box PC
1 x DVD-ROM contains the followings:
— Quick Reference Guide
— Driver Utility
Other major components include the followings:
— Adapter X 1
— Power cord X 1
— Rubber x 4
— Screws
SEPC-BYT Quick Reference Guide
SEPC-BYT
System
CPU
Onboard Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)
BIOS
AMI uEFI BIOS, 64Mbit SPI Flash ROM
I/O Chip
iTE 8772E
System Memory
One 204-pin DDR3L 1333MHz SO-DIMM socket, supports up to 8GB Max
Storage
1 x 2.5” Driver Bay, Onboard eMMC 32GB
Watchdog Timer
Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min./step
H/W Status
Monitor
Monitoring CPU & System Temperature and Voltage
Expansion
1 x Full size Mini PCI-e socket (support WiFi)
1 x Half size Mini PCI-e socket (support m-SATA)
External I/O
USB port
2 x USB 2.0, 1 x USB 3.0
COM port
1 x RS-232 port (Pin 9 without power)
LAN port
1 x RJ45
VGA port
1 x VGA
HDMI port
1 x HDMI
SD card
1 x SD card socket
Audio port
Line-out , Mic-in
DC Jack
1 x DC Jack 2.5mm
WiFi
1 x Full size Mini PCI-e socket (support WiFi)
Others
1 x Power on/off
1 x HDD LED
1 x 4 bit GPIO
1 x SMA Connector
1 x Power LED
Display
Chipset
Intel® Atom™ Celeron® SoC integrated Graphics Supports dual display
Resolution
VGA: 2560 x 1600/ HDMI: 1920 x1080
Dual Display
VGA + HDMI
Audio
Audio Codec
Realtek ALC662 HD Audio Decoding controller supports 2-CH
Audio Interface
Mic-in, Line-out
Ethernet
LAN Chip
1x Realtek RTL8111G PCI-e Gigabit Ethernet
Ethernet Interface
10 /100 /1000 Base-Tx Gigabit Ethernet
1.3 System Specifications
6 SEPC-BYT Quick Reference Guide
Quick Reference Guide
7
SIM card
SIM card
1 x SIM Card socket
SD card socket
SD card socket
1 x SD card socket
Environment
&Mechanical
Power Type
12V 5A 60W adapter
Operating Temp.
0 ~ 50°C (32 ~ 122°F), (w/SSD, mSATA), ambient w/ air flow
0 ~ 40°C (32 ~ 104°F), (w/HDD), ambient w/ air flow
Storage Temp.
-20 ~ 75°C (-4 ~ 167°F) w/SSD
-20 ~ 65°C ( -4 ~ 149°F ) w/HDD
Operating Humidity
0 ~ 90% Relative Humidity, Non-condensing
Size (L x W)
180mm x 125mm x 58 mm
Note: Specifications are subject to change without notice.
SEPC-BYT Quick Reference Guide
SEPC-BYT
Connectors
Label
Function
Note
Line-out
Line-out jack
Mic-in
Microphone-in audio jack
VGA
VGA connector
D-sub 15-pin, female
USB
USB 2.0 Type A connector
HDD LED
HDD LED indicator
Power LED
Power LED indicator
SD Card Socket
SD/MS/MMC socket
Connectors
Label
Function
Note
COM1
Serial port connector
DB-9 male connector
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
8 SEPC-BYT Quick Reference Guide
Quick Reference Guide
9
Power
Power on button
DC-in
DC power-in connector
HDMI
HDMI connector
LAN1
Gigabit LAN (RJ-45) connector
SMA connector 1
SMA connector (Default)
SMA connector 2
SMA connector (Optional)
USB
1 X USB 2.0 Type A connector
1 X USB 3.0 Type A connector
SEPC-BYT Quick Reference Guide
SEPC-BYT
(Unit: mm)
1.5 System Dimensions
1.5.1 Front & Top view
Note: VESA Bracket optional
10 SEPC-BYT Quick Reference Guide
11
2. Hardware
Configuration
Please refer to SENX-BYT User’s Manual for advanced information.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
Quick Reference Guide
SEPC-BYT Quick Reference Guide
SEPC-BYT
PIN
Signal
PIN
Signal
PIN
Signal
1 R 6
GND
11
NC 2 G 7 GND
12
DATA 3 B 8 GND
13
HSYNC
4
NC 9 +5V
14
VSYNC
5
GND
10
GND
15
CLK
Signal
PIN
PIN
Signal
DCD#
1 6 DSR#
RXD
2 7 RTS#
TXD
3 8 CTS#
DTR#
4 9 RI#
GND
5
2.1 SEPC-BYT connector mapping
2.1.1 VGA connector (VGA)
2.1.2 Serial port connector (COM1)
12 SEPC-BYT Quick Reference Guide
13
Note:
This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub.
Refer to the table below for the LAN port LED
indications.
Speed
Status
Speed
Description
Speed
Status
Speed
Description
OFF
No Light
OFF
10Mbps
connection
Orange
Linked
Green
100Mbps
connection
Blinking
Data activity
Orange
1Gbps
connection
2.1.3 Gigabit LAN (RJ-45) connector (LAN)
Quick Reference Guide
SEPC-BYT Quick Reference Guide
SEPC-BYT
2.2 Installing Hard Disk & Memory
Step1. Unfasten 4 screws to remove the back cover.
14 SEPC-BYT Quick Reference Guide
Quick Reference Guide
15
Step2. Insert the HDD & Memory and fasten 4 screws.
Step3. Assemble the back cover back as step 2 to step 1.
SEPC-BYT Quick Reference Guide
Loading...