10.1" WSVGA TFT RISC Multifunctional Panel PC
with RISC-IMX51
Quick Reference Guide
1st Ed –16 January 2012
Copyright Notice
Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED.
Part No. E2017RPC1A1R
RPC-10W1
FCC Statement
Notice
Copyright Notice
Trademark Acknowledgement
Disclaimer
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright 2011 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Brand and product names are trademarks or registered trademarks of their respective
owners.
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
these products are free from patent, copyright, or mask work right infringement, unless
2 RPC-10W1 Quick Reference Guide
Quick Reference Guide
3
Life Support Policy
A Message to the customer
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2 A critical component is any component of a life support device or system whose failure
to perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
RPC-10W1 Quick Reference Guide
RPC-10W1
Headquarters and Branch
Avalue USA
Avalue Technology Inc.
7F, 228, Lian-cheng Road, Chung Ho City, Taipei,
Taiwan
Tel:+886-2-8226-2345
Fax: +886-2-8226-2777
Information:sales@avalue.com.tw
Service: service@avalue.com.tw
2.2.3 DC power-in connector .............................................................................................................. 12
RPC-10W1 Quick Reference Guide
RPC-10W1
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x 10.1” WSVGA TFT RISC Multifunctional Panel PC System.
1 x Quick Reference Guide
Other major components include the following:
— 1 x Power Adapter(12V/5A)
6 RPC-10W1 Quick Reference Guide
7
Panel
Model
RPC-10W1-M51
RPC-10W1-M51W
RPC-10W1-M51P
LCD size
10.1”
Display type
WSVGA TFT
Resolution
1024 x 600
Color
262K
Pixel pitch
0.1905mm(H) x 0.189mm(V)
Luminance
180cd/m²
Contrast ratio
300
Viewing angle
15(U), 35(D), 45(L), 45(R)
Response time
30 ms
Backlight
LED
Touch Type
4 Wires resistive
Touch Light Transmission
80%
Integrated Module
n/a
w/ WiFi Module
w/ POE Module
System
Board
RSC-IMX51
CPU
Freescale i.MX515 ARM Cortex-A8 800MHz
PMIC
Freescale MC13892AJVL
Flash
Onboard 4GB MLC NAND Flash
Memory
Onboard 512MB DDR2 SDRAM
SSD
SD or SDHC
Rear Panel I/O
Serial Port
1 x RS-232, 1 x RS-232/ 422/ 485
USB
2 x USB 2.0
Mini USB
1 x Mini-USB
Ethernet
1 x RJ-45
Mechanical & Environmental
Color
Front & Rear panel Black
Power Requirement
+12 VDC Input
Operating Temperature
0°C to 40°C (32°F to 140°F)
Relative Humidity
0%~90% relative humidity, non-condensing
Storage Temperature
-20°C to 60°C
Mounting
Wall/Stand/VESA 100 mm X 100 mm
Dimensions
252.8mm x 164mm x 41.3mm
Weight
2.5Kgs
1.3 System Specifications
Quick Reference Guide
RPC-10W1 Quick Reference Guide
RPC-10W1
1.4 System Overview
1.4.1 Overview
1.4.2 System dimensions
8 RPC-10W1 Quick Reference Guide
Quick Reference Guide
9
1.4.3 System Rear View
1.4.4 Right and Left View
RPC-10W1 Quick Reference Guide
RPC-10W1
2. Hardware
Configuration
Jumper and Connector Setting, Driver and BIOS Installing
For advanced information, please refer to:
1- RSC-IMX51 Installation Guide or User’s Manual
2- EAM-POE and AUX-mPCIe (Optional) Installation Guide.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
10 RPC-10W1 Quick Reference Guide
11
Connectors
Label
Function
Note
COM1
Serial port connector1
DB-9 male connector
COM2
Serial port connector2
DB-9 male connector
DC-IN
+12V DC power-in connector
LAN
RJ-45 Fast Ethernet connector
MODE SWITCH
Boot Mode selector
Mini USB
USB client connector
Right side
POE
RJ-45 POE connector
For RPC-10W1-M51P
Power S/W
System power switch
RESET
Reset button
SD Card Slot
SD/SDHC card socket
Right side
USB
USB 2.0 connector 1&2
Left side
Signal
PIN
PIN
Signal
NC
1 2 RX1
TX1
3 4 NC
GND
5 6 NC
RTS
7 8 CTS
NC
9
2.1 Jumper & connector list
Quick Reference Guide
2.2 Jumper & connector settings
2.2.1 COM1 & COM2 connector
RPC-10W1 Quick Reference Guide
RPC-10W1
Signal
PIN
PIN
Signal
BMOD1
1
5
+V2D775_BOOT
BMOD0
2 6 BT_SRC[1]
3
7
+V1D8_DIG1
BT_SRC[0]
4
8
Boot from onboard SD
Boot from SD socket
USB OTG mode (Reflash onboard SD only)
Please note:
DIP Switch setting:
0=Off, 1=On
When Position4 is switched On, the system is forced to power On as soon as power is applied. Switch to Off
mode for normal operation.
DC-IN 12V
2.2.2 Boot Mode selector (SW2)
2.2.3 DC power-in connector
12 RPC-10W1 Quick Reference Guide
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.