AID-173M
17.3” Medical PC
Quick Reference Guide
1st Ed – 15 September 2014
Copyright Notice
Copyright 2014 Avalue Technology Inc., ALL RIGHTS RESERVED.
Part No. E2017A7M0A0R
AID-173M
FCC Statement
A Message to the Customer
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
2 AID-173M Quick Reference Guide
Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................ 4
1.1 Safety Precautions .................................................................................................... 4
1.2 Packing List ............................................................................................................... 4
1.3 System Specifications ............................................................................................... 5
1.4 System Overview ................................................................ ................................ ...... 7
1.4.1 I/O View ................................................................................................................................... 7
1.5 System Dimensions .................................................................................................. 8
2. Hardware Configuration ......................................................................................... 9
2.1 AID-173M connector setting .................................................................................... 10
2.2.1 External Serial Port 1 connector (COM1) .............................................................................. 10
2.2.2 External Serial Port 2 connector (COM2) .............................................................................. 11
AID-173M Quick Reference Guide
AID-173M
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x AID-173M Medical PC
1 x Adapter
1 x Power cord
4 AID-173M Quick Reference Guide
5
Component
Board
Power Board AID-173M
AD Board AV2362
Side Board AUX-AID173-IO
Adapter
60W 19V@3.15A IEC/EN 60601-1 Medical Adapter
System Fan
Fan-less
Microphone
1 x System Microphone
Speaker
2 x 2W High Quality System Speakers
Camera
1 x 2.0M Camera
Panel
LCD Panel
17.3” TFT-LCD 1920*1080 from AUO / CMO-Innolux
LCD Control Board
LCD Built-in Inverter
B/L Inverter/Converter
LCD Built-in LED Backlight
Touch Screen
17.3” Resistive Touch Panel
Touch Controller
Built-in Touch controller
External I/O
Serial Port
1 x RS-232
1 x RS-232/422/485
USB Port
3 x USB 2.0 Port
Video Port
2 x HDMI Input
Audio Port
1 x Earphone
1 x Mic
Switch
Capacitive Touch Button
Indicator Light
1 x Orange/Green LED Indicator (System)
1 x Green LED Indicator (Touch Button)
Expansion Slots
2 x Mini PCIe sockets
Mechanical
Power Type
DC 12 ~ 19V
Power Connector Type
5.5 x 2.5 x 9.5 DC Jack
Dimension
448 (L) x 281 (H) x 45 (D) mm (w/o MSR/HS)
Weight
4.5Kgs
Color
White without Antimicrobial paint
Fan-less
Full System Fan-less
Reliability
EMI Test
CE Class B, FCC Class B, (EN60601-1-2 based upon customers’ request)
Safety
(EN 60601-1, UL 60601-1 based upon customers’ request)
1.3 System Specifications
Quick Reference Guide
AID-173M Quick Reference Guide
AID-173M
Dust and Rain Test
IP-65 on Front Panel
Vibration Test
Standard (0.00454G²/Hz,1.5Grms 5 ~ 500Hz)
Mechanical Shock Test
Standard
Drop Test
EC-60068-2-32 (96.5cm)
Operating Temperature
0 ~ 40C
Operating Humidity
10 ~ 80%
Storage Temperature
-20 ~ 45C
6 AID-173M Quick Reference Guide
7
Connectors
Label
Function
Note
USB Type
USB connector
USB
3 x USB 2.0 connector
HDMI1/2
HDMI 1/2 input connector
DC IN
connect to adapter
BNC Video Input
For TV Tuner Card (Optional)
COM1/2
External Serial Port 1/2 connector
(Optional RS-422/485 for COM2)
DB-9 male connector
1.4 System Overview
1.4.1 I/O View
Quick Reference Guide
AID-173M Quick Reference Guide
AID-173M
1.5 System Dimensions
8 AID-173M Quick Reference Guide
(Unit: mm)
Quick Reference Guide
9
2. Hardware
Configuration
Note: If you need more information, please visit our website:
http://www.avalue.com.tw
AID-173M Quick Reference Guide
AID-173M
Signal
PIN
PIN
Signal
DCDA#
1 2 RXDA
TXDA
3 4 DTRA#
GND
5 6 DSRA#
RTSA#
7 8 CTSA#
RIA#
9
2.1 AID-173M connector setting
2.2.1 External Serial Port 1 connector (COM1)
10 AID-173M Quick Reference Guide
11
In RS-232 Mode
Signal
PIN
PIN
Signal
DCDB#
1 2 RXDB
TXDB
3 4 DTRB#
GND
5 6 DSRB#
RTSB#
7 8 CTSB#
RIB#
9
In RS-422 Mode
Signal
PIN
PIN
Signal
TxD1-
1 2 TxD1+
RxD1+
3 4 RxD1-
GND
5 6 NC
NC
7 8 NC
NC
9
In RS-485 Mode
Signal
PIN
PIN
Signal
DATA1-
1 2 DATA1+
NC
3 4 NC
GND
5 6 NC
NC
7 8 NC
NC
9
2.2.2 External Serial Port 2 connector (COM2)
Quick Reference Guide
AID-173M Quick Reference Guide
Loading...