Large Flush Wood Insert Rectangular:
1 Piece Surround Panel Installation
(SKUs: 96100392, 96100393)
Compatibility
• Large Flush Wood Hybrid-Fyre Insert
Surround Panel Sizing
Height Width
96100392 32-1/2” 42”
96100393 35” 47”
Packing List
• Surround Panel
• (2) Panel Mounting Brackets
• (6) #10 screws (included with insert hardware pack)
Installation
1. Before installing, the insert should be in place with the flue attached. Attach the brackets as shown below,
using the screws included in the hardware pack with the insert. Make sure the brackets are flush with the
front of the convection chamber.
Page 1 of 2 17601685 - Printed 12/12/13 © Travis Industries, Inc.
Large Flush Wood Insert Rectangular:
2. Attach the surround panel as shown below.
WARNING
Failure to do this may cause the wiring to become damaged.
: Make sure all wiring is inserted into the cavity between the insert and the fireplace.
1 Piece Surround Panel Installation
(SKUs: 96100392, 96100393)
: When installing the panel, route the wires through the notch on the bottom of the panel
HINT
(either side).
Page 2 of 2 17601685 - Printed 12/12/13 © Travis Industries, Inc.
Loading...