© 1999 AVALON INDUSTRIES, INC. PO Box 5976, San Clemente, California, U.S.A.
Tel: 949-492-2000 Fax: 949-492-4284 www.avalondesign.com e-mail: avalon@avalondesign
Avalon reserves the right to incorporate changes in design and in the specifications of this product without prior notice.
VT-747SP SPECIFICATIONS
Circuit topology
Input gain range
Maximum input level
Maximum output level
Output type
Noise 20kHz unweighted
Distortion THD, IMD
Frequency response -3dB
Gain reduction meter
Output meter
Compressor type
Make-up gain
Threshold - Ratio
Attack- Release
Side-chain spectral contour
Equalizer type
Frequency bands (6)
AC po wer
Dimensions
Weight
Dimensions-shipping carton
Weight-packed
Dual triode vacuum tubes, high-voltage discrete Class A
Balanced, Class A, 20k ohms, -6dB to +16dB with high gain switch
+36dB balanced XLR pin 2 hot
+30dB balanced 600 ohms, DC coupled, discrete Class A
XLR connector, output trim gain -45dB to +10dB
-92dB
0.5%
1 Hz to 200kHz
High quality, illuminated gain reduction meter 0dB to -20dB range
Twin 20 segment LED VU meters with -27dB to +30dB range
Optical passive attenuator
Variable 0dB to +10dB stereo tracking
Threshold variable -30dB to +20dB, ratio-compression variable 1:1 to 20:1
Attack variable 2mS to 200mS, release variable 100mS to 5 seconds
Variable threshold -15dB to +15dB, frequency 70Hz to 9kHz twin ranges
Discrete Class A, passive design optimized for full range program material
Variable amplitude LF +/-16dB 10Hz shelf response
Variable amplitude MF1 +/-6dB 100Hz selected Q response
Variable amplitude MF2 +/-4dB 550Hz selected Q response
Variable amplitude MF3 +/-4dB 2kHz selected Q response
Variable amplitude MF4 +/-8dB 5kHz selected Q response
Variable amplitude HF +/-16dB 32kHz shelf response
Internal toroidal 100v to 240v, 50-60Hz selectable, 55 watts maximum
19x 12x3.5 in (482x305x89mm)
221bs (10kg)
21 x 18 x 8 in (533 x 457 x 203mm)
261bs (11.8kg)