![](/html/4d/4de5/4de51972601975fcaf226848e0e13366efcfaf4e77adc2017bb6c94e26c87ad6/bg1.png)
AW-H900
USER’S MANUAL
Point-to-point
Industrial-grade, ultra-long-range 900 MHz
non-line-of-sight wireless Ethernet systems
![](/html/4d/4de5/4de51972601975fcaf226848e0e13366efcfaf4e77adc2017bb6c94e26c87ad6/bg2.png)
AW-H900
User’s Manual
Non-line-of-sight :: 900 MHz
Thank you for your purchase of the AW-H900 wireless Ethernet housing. The AvaLAN wireless radio functions in place of an Ethernet
cable and provides a transparent wireless point-to-point Ethernet cable replacement.
If you have any questions when conguring your AvaLAN system, please send an e-mail to support@avalanwireless.com.
For a live technician, please call technical support at (650) 384-0000.
AW-H900 Kit
Integrated 900 MHz wireless housing for xed network cameras.
Kit includes:
n
— (1) Videolarm (ACH313) outdoor housing with heater/blower
n
— (1) AW900x outdoor radio
n
— (1) 120 VAC to 24 VAC/40 Va transformer
n
— (2) AW2 2.5dBi omni-directional antennae
n
— (1) 120 VAC to 12 VDC power adapter
n
— (1) Power over Ethernet injector
Or upgrade to optional AW11 antennae
Shown with optional
AW11 antennae
purchased separately
Initial setup
CAMERA
1) Set up your network camera while attached to a network. Please refer to the manufacturer’s instructions provided with the
camera.
2) Check that the video from the camera can be viewed on a networked PC.
3) To optimize the camera for use over a wireless link, please see the camera performance FAQ at www.avalanwireless.com/support.
HOUSING
1) Install the Videolarm ACH13HBWM housing using the supplied 120 VAC to 24 VAC transformer. Please contact Videolarm for
installation support on the housing (www.videolarm.com; (800) 554-1124).
2) Mount the network camera within the housing according to Videolarm’s instructions.
3) Attach the antenna to the housing.
WIRELESS SETUP
1) Install the AW900x.
2) Attach the antenna to the AW900x (see Appendix A for polarization guide on Page 7).
3) Attach the white power injector to the end of the Ethernet cable.
4) Attach the 120 VAC to 12 VDC power supply to the white power injector.
5) Connect an Ethernet cable from the injector to the network (or directly to a PC).
6) The AvaLAN radios automatically select the best radio channel, encrypt the Ethernet data, and transport the data wirelessly to its
mate.
7) Use an Internet browser on a networked PC to view the video from the camera. Make sure the subnet/IP addresses of the PC and
the camera are compatible.
8) For radio/network troubleshooting, see Page 4.
Technical support :: (650) 384.0000
PAGE 2
www.avalanwireless.com
![](/html/4d/4de5/4de51972601975fcaf226848e0e13366efcfaf4e77adc2017bb6c94e26c87ad6/bg3.png)
System diagram
AW-H900User’s Manual
Ultra-long-range
digital Ethernet
900 MHz radio link
AW900x mate
Power over Ethernet
injector (included)
9-48 VDC
24 VAC
Ethernet
RJ45 10BaseT
Power adapter
120 VAC to 12 VDC
(included)
Power adapter
120 VAC to 24 VAC
(included)
LED display
The AW900x mate has a 16 LED display that shows the status of the device. These LEDs can be viewed by removing the cover.
www.avalanwireless.com
PAGE 3
Technical support :: (650) 384.0000