AvaLAN Wireless AW-900x User Manual
AW900x
USER’S MANUAL
Point-to-point
Industrial-grade, ultra-long-range 900 MHz
non-line-of-sight wireless Ethernet systems
AW900x
User’s Manual
Non-line-of-sight :: 900 MHz
Thank you for your purchase of the AW900x
AW900x Kit
point-to-point wireless Ethernet bridge.
Long-range 900 MHz wireless outdoor Ethernet
If you have any questions when conguring
your AvaLAN system, please send an e-mail
to support@avalanwireless.com.
bridge. Kit includes:
n
— (2) AW900x outdoor radios
n
— (2) 110 VAC to 12 VDC power adapters
n
— (2) Power over Ethernet injectors
For a live technician, please call technical
support at (650) 384-0000.
Requires antennae: Use with AW2, AW5H-900, AW5P-900, AW6,
AW10, AW11, or AW15 — all FCC approved
For advanced installation information,
please visit www.avalanwireless.com.
Operational summary
The AW900x replaces costly wiring with a wireless Ethernet bridge that can enable remote Wi-Fi access points, Ethernet pan/tilt/zoom
security cameras, VoIP phones, or Internet kiosks. AvaLAN’s product offers the ideal combination of price, range, data rate, security,
interference avoidance, quality-of-service, and ease-of-use.
The AW900x is the best solution when:
— a Broadband Ethernet drop will cost too much or is impractical to install
— guaranteed DSL-rate throughput is required (kiosks/Wi-Fi access points/PTZ cameras)
— guaranteed latency for voice or video is required (PTZ cameras/VoIP)
— Wi-Fi is too slow due to saturation or 2.4 GHz interference (airport/mall/PTZ cameras)
— ultra-low current consumption is required (1 Watt/solar powered systems)
n
n
n
n
n
Features include:
— foliage penetrating, non-line-of-sight wireless Ethernet bridging
— does not interfere with Wi-Fi networks
— Highest Quality of Service (QoS) available — synchronous point-to-point protocol enables extremely low data latency and
n
n
n
— jitter
— 128 bit encrypted payload protection provides secure data delivery
— simple plug and play — pre-congured as matched pairs with no user programming required
— power over Ethernet enabled
— operates in the 902-928 MHz band and does not require an FCC license to operate or install
— VLAN extensions supported
n
n
n
n
n
Technical support :: (650) 384.0000
PAGE 2
www.avalanwireless.com
AW900xUser’s Manual
Quick setup
1) Plug in the AW900x using the supplied injector and power adapter.
2) Connect an Ethernet cable from each AW900x to a network device.
3) Send Ethernet trafc. For troubleshooting, see Page 4.
System diagram
Each AW900x radio automatically selects the best radio channel, encrypts the Ethernet trafc, and transports the data wirelessly to its
mate. Any Ethernet device can be connected to the AW900x. The AW900x functions in place of an Ethernet cable and provides a transparent wireless point-to-point Ethernet cable replacement. Crossover cables are not necessary as the AW900x automatically senses
the device (client or switch).
Power adapter
110 VAC
Power over
Ethernet injector
CAT5 cable
(not included)
Ethernet
RJ45/10BaseT
Data
AW900x
RF connector
RP-TNC
Power
9 to 48 VDC
CAT5 cable
(not included)
900 MHz
digital
Ethernet
bridge
RF connector
RP-TNC
AW900x
Ethernet
RJ45/10BaseT
CAT5 cable
(not included)
CAT5 cable
(not included)
Data
Power adapter
110 VAC
Power over
Ethernet injector
Power
9 to 48 VDC
www.avalanwireless.com
PAGE 3
Technical support :: (650) 384.0000
Loading...