HSMx-A2-xx-xxxxx Bi-Color
HSMx-A3xx-xxxxx Tri-Color
Surface Mount LED Indicators,
PLCC-4 SMT LEDs
Data Sheet
Description
This family of SMT LEDs is packaged in the industry
standard PLCC-4 package. These SMT LEDs have high
reliability performance and are designed to work under
a wide range of environmental conditions. This high
reliability feature makes them ideally suited to be used
under harsh interior automotive as well as interior signs
application conditions.
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
shipped in single intensity and color bin, except red color
to provide close uniformity.
These LEDs are compatible with IR and TTW solder reow
process.
This super wide viewing angle at 120° together with
the built in reector pushing up the intensity of the
light output makes these LED suitable to be used in the
interior electronics signs. The at top emitting surface
makes it easy for these LEDs to mate with light pipes.
This is suitable for general backlighting in automotive
interior, oce equipment, industrial equipment, and
home appliances.
Features
• Industry Standard PLCC-4 package (Plastic Leaded
Chip Carrier)
• High reliability LED package
• High brightness using AlInGaP and InGaN dice technologies
• Available in full selection of colors
• Super wide viewing angle at 120°
• Available in 8 mm carrier tape on 7-inch reel
• Compatible with IR soldering process
Applications
• Electronic signs and signals
– Interior full color sign
– Variable message sign
• Interior automotive
– Instrument cluster backlighting
– Central console backlighting
– Cabin backlighting
• Oce automation, home appliances, industrial
equipment
– Front panel backlighting
– Display backlighting
CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Package Dimensions
0.8 ± 0.3
3.5 ± 0.2
2.8 ± 0.2
0.5 ± 0.1
3.2 ± 0.2
2.2 ± 0.2
1.9 ± 0.2
0.1 TYP. 0.8 ± 0.1
CATHODE MARKING
(2) (3)
(1) (4)
0.7 ± 0.1
NOTE:
1. ALL DIMENSIONS IN mm.
Tri Color
1 Cathode (Color 1)
2 Common Anode
3 Cathode (Color 3)
4 Cathode (Color 2)
Bi Color
1 Cathode (Color 1)
2 Anode (Color 1)
3 Cathode (Color 2)
4 Anode (Color 2)
Device Selection Guide
Bi Color
Part Number Color 1 Color 2
HSMF-A201- xxxxx GaP Red GaP Yellow Green
HSMF-A202- xxxxx GaP Red GaP Yellow
HSMF-A203- xxxxx GaP Red GaP Emerald Green
HSMF-A204- xxxxx GaP Orange GaP Yellow Green
HSMF-A205- xxxxx GaP Orange GaP Emerald Green
HSMF-A206- xxxxx GaP Yellow GaP Yellow Green
HSMF-A211- xxxxx AlGaAs Red GaP Yellow Green
HSMF-A212- xxxxx AlGaAs Red GaP Yellow
HSMF-A222- xxxxx AlInGaPRed AlInGaP Amber
HSMF-A227- xxxxx AlInGaP Red GaN Blue
HSMF-A228- xxxxx AlInGaP Amber GaN Blue
HSMF-A226- xxxxx AlInGaP Amber AlInGaP Yellow Green
2
Color 1 Color 2
Min. Iv @ 20 mA Typical Iv @ 20 mA Min. Iv @ 20 mA Typical Iv @ 20 mA
Part Number Bin ID (mcd) (mcd) Bin ID (mcd) (mcd)
HSMF-A201-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A202-A00J1 K2 9.0 16.0 K1 7.2 12.0
HSMF-A203-A00J1 K2 9.0 16.0 J1 4.5 8.0
HSMF-A204-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A205-A00J1 K2 9.0 16.0 J1 4.5 8.0
HSMF-A206-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A211-A00J1 L2 14.0 25.0 L1 11.2 20.0
HSMF-A212-A00J1 L2 14.0 25.0 K1 7.2 12.0
HSMF-A222-A00J1 P1 45.0 80.0 P1 45.0 80.0
HSMF-A227-A00J1 P1 45.0 80.0 J2 5.6 10.0
HSMF-A228-A00J1 P1 45.0 80.0 J2 5.6 10.0
HSMF-A226-A00J1 P2 56.0 100.0 M2 22.4 60.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. IV tolerance = ±12 %.
Tri Color
Part Number Color 1 Color 2 Color 3
HSMF-A301-xxxxx GaP Red GaP Yellow GreenGaN Blue
HSMF-A331-xxxxx AlInGaP Red InGaN Green GaN Blue
HSMF-A332-xxxxx AlInGaP Red Orange InGaN Green GaN Blue
HSMF-A341-xxxxx AllnGaP Red InGaN Green InGaN Blue
HSMF-A342-xxxxx AllnGaP Red Orange InGaN Green InGaN Blue
Color 1 Color 2 Color 3
Min. Iv Typical Iv Min. Iv Typical Iv Min. Iv Typical Iv
@ 20 mA @ 20 mA @ 20 mA @ 20 mA @ 20 mA @ 20 mA
Part Number Bin ID (mcd) (mcd) Bin ID (mcd) (mcd) Bin ID (mcd) (mcd)
HSMF-A301-A00J1 K2 9.0 13.0 L2 14.0 20.0 K2 9.2 10.0
HSMF-A331-A00J1 P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0
HSMF-A332-A00J1 P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0
HSMF-A341-A00J1 P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0
HSMF-A342-A00J1 P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. IV tolerance = ±12 %.
3
Part Numbering System
HS M x1 – A x2 x3x4 – x5x6 x7 x8x
9
Packaging Option
Color Bin Selection
Intensity Bin Select
Device Specication Conguration
Package Type
LED Chip Color
Absolute Maximum Ratings (TA = 25°C)
AlInGaP
Parameters GaP AlGaAs Red, Amber Yellow Green GaN/InGaN
DC Forward Current
Peak Forward Current
[1]
30 mA 30 mA 30 mA
[2]
100 mA 100 mA 100 mA 100 mA 100 mA
Power Dissipation 78 mW 78 mW 72 mW 48 mW 120 mW
Reverse Voltage 5 V
Junction Temperature 110°C
Operating Temperature –55°C to +100°C
Storage Temperature –55°C to +100°C
Notes:
1. Derate linearly as shown in gure 4.
2. Duty factor = 10%, Frequency = 1kHz.
3. Drive Current between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at current below 5 mA is not recommended.
[3,4]
20 mA
[4]
20 mA
4
Optical Characteristics (TA = 25°C)
Peak Dominant Luminous Luminous Intensity/
Wavelength Wavelength Viewing Angle Ecacy η
λ
(nm) λD (nm)
PEAK
[1]
2θ
(Degrees)
1/2
[2]
(lm/W)
Color Typ. Typ. Typ. Typ. Typ.
GaP Red 635 626 120 120 0.45
AlGaAs Red 645 637 120 63 0.45
AlInGaP Red 635 626 120 150 0.45
AlInGaP Red Orange 621 615 120 240 0.45
GaP Orange 600 602 120 380 0.45
AlInGaP Amber 592 590 120 480 0.45
GaP Yellow 583 585 120 580 0.45
AlInGaP Amber 592 590 120 480 0.45
GaP Yellow Green 565 569 120 590 0.45
GaP Emerald Green 558 560 120 650 0.45
InGaN Green 523 525 120 500 0.45
InGaN Blue 468 470 120 75 0.45
GaN Blue 428 462 120 65 0.45
AlInGaP Yellow Green 575 571 120 620 0.45
Notes:
1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. θ
is the o-axis angle where the luminous intensity is 1/2 the peak intensity.
1/2
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous ecacy in lumens/watt.
v
[3]
Total Flux
Iv (mcd) /Φv (mlm)
Electrical Characteristics (TA = 25°C)
Forward Voltage Reverse Voltage Reverse Voltage
VF (Volts) @ IF = 20mA VR @ 100 µA VR @ 10 µA
Dice Technology Typ. Max. Min. Min.
GaP 2.2 2.6 5 -
AS AlGaAs 1.9 2.6 5 -
AlInGaP 1.9 2.4 5 -
GaN Blue 3.9 4.3 - 5
InGaN 3.4 4.05 - 5
5
Figure 1. Relative intensity vs. wavelength.
0 3
FORWARD VOLTAGE – V
0
10
30
35
FORWARD CURRENT – mA
5
5
20
15
25
1 2 4
AS AlInGaP
InGaN
AlGaAs
GaP
GaN
BLUE
0 20
DC FORWARD CURRENT – mA
0
0.4
1.8
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
35
0.8
0.2
1.0
10
0.6
1.2
25
AlInGaP
Gap
5 15 30
1.4
1.6
AlGaAs
GaN
InGaN
0
35
0
20 60 80 120
CURRENT – mA
TEMPERATURE – °C
40
20
25
15
AlGaAs
10
30
100
GaP
5
AS AlInGaP
InGaN/GaN
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.8
0
380 480 580 680 730 780630530430
BLUE
CYAN
0.6
0.4
0.2
GREEN
YELLOW GREEN
AMBER
ORANGE
RED ORANGE
RED
0.1
0.3
0.5
0.7
0.9
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.8
0
380 480 580 680 730 780630530430
GaN BLUE
GaP
EMERALD
GREEN
GaP ORANGE
GaP RED
0.6
0.4
0.2
GaP YELLOW
GaP
YELLOW
GREEN
Figure 2. Forward current vs. forward voltage. Figure 3. Relative intensity vs. forward voltage. Figure 4a. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C,
RθJA = 500°C/W (1 chip on).
NORMALIZED INTENSITY
1.0
0
ANGULAR DISPLACEMENT – DEGREES
0.8
0.6
0.2
0.4
-70 -50 -30 0 20 30 50 70 90-90 -20-80 -60 -40 -10 10 40 60 80
Figure 4b. Maximum forward current vs. ambient
0
35
0
20 60 80 120
MAXIMUM FORWARD CURRENT – mA
AMBIENT TEMPERATURE – °C
40
20
25
15
AlGaAs
10
30
100
GaP
5
AS AlInGaP
InGaN/GaN
0 20
CURRENT – mA
460
480
540
DOMINANT WAVELENGTH – nm
35
500
470
510
10
490
520
25
InGaN GREEN
5 15 30
530
InGaN BLUE
0 0.5
X-COORDINATE
0
0.2
0.9
Y-COORDINATE
0.9
0.4
0.1
0.5
0.3
0.3
0.6
0.7
BLACK BODY CURVE
0.1 0.4 0.8
0.7
0.8
HSMF-A341
HSMF-A342
HSMF-A331
0.2 0.6
HSMF-A332
HSMF-A301
CIE CHART 1931
temperature. Derated based on TJMAX = 110°C,
RθJA = 700°C/W (3 chip on).
Figure 6. Radiation pattern.
Figure 5. Dominant wavelength vs. forward current
– InGaN.
Figure 7. Chromaticity diagram for Tricolor.
Figure 8a. Recommended SnPb reow soldering prole. Figure 8b. Recommended Pb-free reow soldering prole.
240°C MAX.
20 SEC. MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
100-150°C
–6°C/SEC.
MAX.
60-150 SEC.
3°C/SEC. MAX.
217 °C
MAX. 120 SEC.
6 °C/SEC. MAX.
3 °C/SEC. MAX.
125 °C ± 25 °C
255 °C
60 to 150 SEC.
10 to 20 SEC.
TIME
TEMPERATURE
* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.
+5 °C
-0 °C
3.30
0.50
3.30
7.50
0.40
2.60
1.10
4.50
1.50
SOLDER RESIST
Note: For detail information on reow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
Figure 9. Recommended soldering pad pattern.
Figure 10. Tape leader and trailer dimension.
200 mm MIN. FOR ∅180 REEL.
200 mm MIN. FOR ∅330 REEL.
TRAILER COMPONENT LEADER
480 mm MIN. FOR ∅180 REEL.
960 mm MIN. FOR ∅330 REEL.
C
A
USER FEED DIRECTION
C
A
4 ± 0.1 4 ± 0.1 2 ± 0.05
3.05 ± 0.1
3.5 ± 0.05
8
+0.3
–0.1
1.75 ± 0.1
3.81 ± 0.1
2.29 ± 0.1
0.229 ± 0.01
8°
∅1.5
+0.1
–0
∅1
+0.1
–0
14.4 (MAX. MEASURED AT HUB)
7.9 (MIN.)
10.9 (MAX.)
62.5
2
+0.5
–0
Ø 20.5 ± 0.3
Ø 13 ± 0.2
+0
–2.5
8.4 (MEASURED AT OUTER EDGE)
+1.50
–0.00
180
LABEL AREA (111 mm x 57 mm)
WITH DEPRESSION (0.25 mm)
Figure 11. Tape leader and trailer dimension.
Figure 12. Reel dimension.
9
Figure 13. Reeling Orientation.
CATHODE SIDE
PRINTED LABEL
USER FEED DIRECTION
Moisture Sensitivity
This product is qualied as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reow the LEDs per the
original MSL rating.
- It is not recommended to open the MBB prior to assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including soldering,
curing or rework need to be completed within 672 hours.
C. Control for unnished reel
- For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their oor life of
672 hours.
E. Baking is required if:
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60% RH at any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
10
Iv Bin Select (X5X6)
Individual reel will contain parts
from 1 half bin only.
X5 Min. Iv Bin Selection
For
HSMF-A201-xxxxx
HSMF-A204-xxxxx
HSMF-A206-xxxxx
Minimum Intensity Bin
Color 1
(Red/Yellow/ Color 2
Orange) (Green)
A K2 L1
B K2 L2
C K2 M1
D K2 M2
E K2 N1
F L1 L1
G L1 L2
H L1 M1
J L1 M2
K L1 N1
L L2 L1
M L2 L2
N L2 M1
P L2 M2
Q L2 N1
R M1 L1
S M1 L2
T M1 M1
U M1 M2
V M1 N1
W M2 L1
X M2 L2
Y M2 M1
Z M2 M2
1 M2 N1
For
HSMF-A202-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) ( Yellow)
A K2 K1
B K2 K2
C K2 L1
D K2 L2
E K2 M1
F L1 K1
G L1 K2
H L1 L1
J L1 L2
K L1 M1
L L2 K1
M L2 K2
N L2 L1
P L2 L2
Q L2 M1
R M1 K1
S M1 K2
T M1 L1
U M1 L2
V M1 M1
W M2 K1
X M2 K2
Y M2 L1
Z M2 L2
1 M2 M1
For
HSMF-A203-xxxxx
HSMF-A205-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red/Orange) (Green)
A K2 J1
B K2 J2
C K2 K1
D K2 K2
E K2 L1
F L1 J1
G L1 J2
H L1 K1
J L1 K2
K L1 L1
L L2 J1
M L2 J2
N L2 K1
P L2 K2
Q L2 L1
R M1 J1
S M1 J2
T M1 K1
U M1 K2
V M1 L1
W M2 J1
X M2 J2
Y M2 K1
Z M2 K2
1 M2 L1
For
HSMF-A211-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Green)
A L2 L1
B L2 L2
C L2 M1
D L2 M2
E L2 N1
F M1 L1
G M1 L2
H M1 M1
J M1 M2
K M1 N1
L M2 L1
M M2 L2
N M2 M1
P M2 M2
Q M2 N1
R N1 L1
S N1 L2
T N1 M1
U N1 M2
V N1 N1
W N2 L1
X N2 L2
Y N2 M1
Z N2 M2
1 N2 N1
Note: 0 represents no maximum bin limit.
For
HSMF-A212-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) ( Yellow)
A L2 K1
B L2 K2
C L2 L1
D L2 L2
E L2 M1
F M1 K1
G M1 K2
H M1 L1
J M1 L2
K M1 M1
L M2 K1
M M2 K2
N M2 L1
P M2 L2
Q M2 M1
R N1 K1
S N1 K2
T N1 L1
U N1 L2
V N1 M1
W N2 K1
X N2 K2
Y N2 L1
Z N2 L2
1 N2 M1
For
HSMF-A222-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Amber)
A P1 P1
B P1 P2
C P1 Q1
D P1 Q2
E P1 R1
F P2 P1
G P2 P2
H P2 Q1
J P2 Q2
K P2 R1
L Q1 P1
M Q1 P2
N Q1 Q1
P Q1 Q2
Q Q1 R1
R Q2 P1
S Q2 P2
T Q2 Q1
U Q2 Q2
V Q2 R1
W R1 P1
X R1 P2
Y R1 Q1
Z R1 Q2
1 R1 R1
2 R2 P1
3 R2 P2
4 R2 Q1
5 R2 Q2
6 R2 R1
For
HSMF-A227-xxxxx
HSMF-A228-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red/Amber) (Blue)
A P1 J2
B P1 K1
C P1 K2
D P1 L1
E P1 L2
F P2 J2
G P2 K1
H P2 K2
J P2 L1
K P2 L2
L Q1 J2
M Q1 K1
N Q1 K2
P Q1 L1
Q Q1 L2
R Q2 J2
S Q2 K1
T Q2 K2
U Q2 L1
V Q2 L2
W R1 J2
X R1 K1
Y R1 K2
Z R1 L1
1 R1 L2
2 R2 J2
3 R2 K1
4 R2 K2
5 R2 L1
6 R2 L2
For
HSMF-A331-xxxxx
HSMF-A332-xxxxx
Minimum Intensity Bin
Color 1
(Red/Red Color 2 Color 3
Orange) (Green) (Blue)
A P1 R1 K2
B P1 R1 L1
C P1 R1 L2
D P1 R2 K2
E P1 R2 L1
F P1 R2 L2
G P1 S1 K2
H P1 S1 L1
J P1 S1 L2
K P2 R1 K2
L P2 R1 L1
M P2 R1 L2
N P2 R2 K2
P P2 R2 L1
Q P2 R2 L2
R P2 S1 K2
S P2 S1 L1
T P2 S1 L2
U Q1 R1 K2
V Q1 R1 L1
W Q1 R1 L2
X Q1 R2 K2
Y Q1 R2 L1
Z Q1 R2 L2
1 Q1 S1 K2
2 Q1 S1 L1
3 Q1 S1 L2
4 Q2 R1 K2
5 Q2 R1 L1
6 Q2 R1 L2
7 Q2 R2 K2
8 Q2 R2 L1
9 Q2 R2 L2
For
HSMF-A341-xxxxx
HSMF-A342-xxxxx
Minimum Intensity Bin
Color 1
(Red/Red Color 2 Color 3
Orange) (Green) (Blue)
A P1 R1 N1
B P1 R1 N2
C P1 R1 P1
D P1 R2 N1
E P1 R2 N2
F P1 R2 P1
G P1 S1 N1
H P1 S1 N2
J P1 S1 P1
K P2 R1 N1
L P2 R1 N2
M P2 R1 P1
N P2 R2 N1
P P2 R2 N2
Q P2 R2 P1
R P2 S1 N1
S P2 S1 N2
T P2 S1 P1
U Q1 R1 N1
V Q1 R1 N2
W Q1 R1 P1
X Q1 R2 N1
Y Q1 R2 N2
Z Q1 R2 P1
1 Q1 S1 N1
2 Q1 S1 N2
3 Q1 S1 P1
4 Q2 R1 N1
5 Q2 R1 N2
6 Q2 R1 P1
7 Q2 R2 N1
8 Q2 R2 N2
9 Q2 R2 P1
X6 Number of Half bins from X
5
For
HSMF-A2xx-xxxxx
Color 1 Color 2
0 0 0
A 0 5
B 0 4
C 0 3
D 0 2
E 5 0
F 5 5
G 5 4
H 5 3
J 5 2
K 4 0
L 4 5
M 4 4
N 4 3
P 4 2
Q 3 0
R 3 5
S 3 4
T 3 3
U 3 2
V 2 0
W 2 5
X 2 4
Y 2 3
Z 2 2
Note: 0 represents no maximum bin limit.
For HSMF-A3xx-xxxxx
Color 1
(Red/Red Color 2 Color 3
Orange) (Green) (Blue)
0 0 0 0
A 5 5 5
B 5 5 4
C 5 5 3
D 5 4 5
E 5 4 4
F 5 4 3
G 5 3 5
H 5 3 4
J 5 3 3
K 4 5 5
L 4 5 4
M 4 5 3
N 4 4 5
P 4 4 4
Q 4 4 3
R 4 3 5
S 4 3 4
T 4 3 3
U 3 5 5
V 3 5 4
W 3 5 3
X 3 4 5
Y 3 4 4
Z 3 4 3
1 3 3 5
2 3 3 4
3 3 3 3
Note: 0 represents no maximum bin limit.
Intensity Bin Limits
Bin ID Min. (mcd) Max. (mcd)
J1 4.50 5.60
J2 5.60 7.20
K1 7.20 9.00
K2 9.00 11.20
L1 11.20 14.00
L2 14.00 18.00
M1 18.00 22.40
M2 22.40 28.50
N1 28.50 35.50
N2 35.50 45.00
P1 45.00 56.00
P2 56.00 71.50
Q1 71.50 90.00
Q2 90.00 112.50
R1 112.50 140.00
R2 140.00 180.00
S1 180.00 224.00
S2 224.00 285.00
T1 285.00 355.00
T2 355.00 450.00
U1 450.00 560.00
U2 560.00 715.00
V1 715.00 900.00
V2 900.00 1125.00
Tolerance of each bin limit = ±12%.
Color Bin Select (X7)
Individual reel will contain parts
from 1 full bin only.
X7 Color Bin Combinations
For
HSMF-A202-xxxxx
HSMF-A203-xxxxx
HSMF-A212-xxxxx
HSMF-A222-xxxxx
HSMF-A227-xxxxx
Color 2
Color 1 (Emerald Green/
(Red) Yellow/Blue)
0 0 0
A 0 ABC
B 0 ABCD
C 0 ABCDE
D 0 BCD
E 0 BCDE
F 0 BCDEF
G 0 CDE
H 0 DEF
J 0 CDEF
K 0 AB
L 0 BC
M 0 CD
N 0 DE
P 0 EF
Note: 0 represents full distribution.
For
HSMF-A201-xxxxx
HSMF-A211-xxxxx
Color 1 Color 2
(Red) (Yellow Green)
0 0 0
A 0 EFG
B 0 FGH
C 0 EF
D 0 FG
E 0 GH
For
HSMF-A205-xxxxx
HSMF-A228-xxxxx
Color 1 Color 2
( Yellow/Amber/ (Emerald
Orange) Green/Blue)
0 0 0
A ABC ABC
B BCD ABC
C CDE ABC
D ABC BCD
E BCD BCD
F CDE BCD
G ABC CDE
H BCD CDE
J CDE CDE
K DEF ABC
L DEF BCD
M DEF CDE
N AB AB
P BC AB
Q CD AB
R DE AB
S AB BC
T BC BC
U CD BC
V DE BC
W AB CD
X BC CD
Y CD CD
Z DE CD
1 AB DE
2 BC DE
3 CD DE
4 DE DE
5 EF AB
6 EF BC
7 EF CD
Note: 0 represents full distribution.
For
HSMF-A204-xxxxx
HSMF-A206-xxxxx
Color 1
( Yellow/
Amber/ Color 2
Orange) (Yellow Green)
0 0 0
A ABC EFG
B BCD EFG
C CDE EFG
D DEF EFG
E ABC FGH
F BCD FGH
G CDE FGH
H DEF FGH
J AB EF
K BC EF
L CD EF
M DE EF
N EF EF
P AB FG
Q BC FG
R CD FG
S DE FG
T EF FG
U AB GH
V BC GH
W CD GH
X DE GH
Y EF GH
Note: 0 represents full distribution.
Note: 0 represents full distribution.
For
HSMF-A3xx-xxxxx
Color 1 Color 2 Color 3
0 0 0 0
A 0 0 ABC
B 0 0 BCD
C 0 0 AB
D 0 0 BC
E 0 0 CD
F 0 ABC 0
G 0 ABC ABC
H 0 ABC BCD
J 0 ABC AB
K 0 ABC BC
L 0 ABC CD
M 0 BCD 0
N 0 BCD ABC
P 0 BCD BCD
Q 0 BCD AB
R 0 BCD BC
S 0 BCD CD
T 0 AB ABC
U 0 AB BCD
V 0 AB AB
W 0 AB BC
X 0 AB CD
Y 0 BC ABC
Z 0 BC BCD
1 0 BC AB
2 0 BC BC
3 0 BC CD
4 0 CD ABC
5 0 CD BCD
6 0 CD AB
7 0 CD BC
8 0 CD CD
Color Bin Limits
Blue Min. (nm) Max. (nm)
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Green Min. (nm) Max. (nm)
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Emerald
Green Min. (nm) Max. (nm)
A 552.5 555.5
B 555.5 558.5
C 558.5 561.5
D 561.5 564.5
Yellow
Green Min. (nm) Max. (nm)
E 564.5 567.5
F 567.5 570.5
G 570.5 573.5
H 573.5 576.5
Packaging Option (X8X9)
X8X9
J1 20 mA test current, Top Mount, 7 inch Reel
Amber/
Yellow Min. (nm) Max. (nm)
A 582.0 584.5
B 584.5 587.0
C 587.0 589.5
D 589.5 592.0
E 592.0 594.5
F 594.5 597.0
Orange Min. (nm) Max. (nm)
A 597.0 600.0
B 600.0 603.0
C 603.0 606.0
D 606.0 609.0
E 609.0 612.0
Red Orange Min. (nm) Max. (nm)
A 611.0 616.0
B 616.0 620.0
Red Min. (nm) Max. (nm)
Full Distribution
Tolerance of each bin limit = ±1 nm.
Note: 0 represents full distribution.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5989-1210EN
AV02-0501EN - December 26, 2007
Loading...