Version: V1.0.1
User Manual
AVA-EX11-40TX
AVA-EX11-40RX
HDMI over Single CatX Cable Extender
1
Table of Contents
Introduction .................................................................................................... 2
Overview ................................................................................................... 2
Features ................................................................................................... 3
Package Contents .................................................................................... 4
Specifications ............................................................................................ 5
Panel Description ..................................................................................... 7
Transmitter ......................................................................................... 7
Receiver ............................................................................................ 9
Hardware Installation ................................................................................... 11
EDID and EQ Management .......................................................................... 13
EDID Management ................................................................................. 13
EQ Management .................................................................................... 13
Troubleshooting ........................................................................................... 14
2
Introduction
Overview
AVA-EX11-40TX/RX is a pair of HDMI extender used to extend Full HD
1080p signals up to 131 feet (40 meters) over a single CatX cable.
The transmitter supports EDID management, which offers multiple EDID
options for various resolutions output. And the receiver supports EQ
management, which provides multiple EQ options for various
applications and equalizes the signals for better viewing effects.
This extender is ideal for various applications, such as homes, offices,
digital entertainment centers, control centers, conference rooms,
schools and corporate training environments, which require the
distribution of an HDMI source signal to a single HDMI display over long
distances.
3
Features
Ultra-slim appearance, space saving and easy-to-install
Supports Full HD 1080p signal transmission distance up to 131 feet
(40 meters) via a single CatX cable, reach to 262 feet (80 meters)
under special condition
Single CatX cable solution, including the transmission of HD
audio/video and IR signals
Supports all high definition resolutions: 1080p, 1080i, 720p with
screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
HDMI v1.3a & v1.4 with full 3D compatibility
USB power supply
±3KV higher than the industry average ESD protection to ensure
the quality
HDCP compliant
integrated EDID DIP on Transmitter, offers multiple EDID options
for various resolutions output and ensures that the HDMI source
reliably outputs correct content for display
Supports EQ setting, provides multiple EQ options for various
applications and equalizes the signal for better viewing effects
4
Package Contents
1 x Transmitter AVA-EX11-40TX
1 x Receiver AVA-EX11-40RX
2 x 5V USB Power Lead
4 x Mounting Ear
1 x User Manual
5
Specifications
Technical
Data Range
6.75Gbps (Maximum)
Maximum Distance
1080p up to 40m/131ft
(It can reach to 80m/262ft under special
conditions)
I/O Connections
Transmitter
1 x Video OUT, 1 x HDMI IN, 1 x IR OUT
Receiver
1 x Video IN, 1 x HDMI OUT, 1 x IR IN
Power Supply 5VDC, 1A
Power Consumption
Transmitter: 3.65W
Receiver: 1.2W
Input Video Signal 1.2 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Maximum Single
Link Range
1080p 24bit colour depth
Video Format
Supported
DTV/HDTV:
480i, 567i, 480p, 576p, 720p, 1080i, 1080p
Output Video
HDMI 1.3a + HDCP (mirrors the input source
to the output display)
IR Wavelength &
Frequency
Wavelength: 940nm
IR Frequency: 38 KHz
ESD Protection
Human-body model:
±8 kV (Air-gap discharge)
±4 kV (Contact discharge)
Surge Protection
Voltage: ±1 kV
(Ten times respectively for the positive and
6
Technical
negative voltage)
Operating
Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage
Temperature
-4°F ~ 140°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
General
Product Dimension
(W x H x D)
100 mm × 15.8 mm × 63.8 mm
/ 3.94'' x 0.62'' x 2.51'' (each)
Weight 0.14 kg (each)
Certification CE, FCC, RoHS
7
Panel Description
Transmitter
Top Panel
1 2
ID
Indicator
Description
1 Status
On: Transmitter and Receiver are linked.
Off: Transmitter and Receiver are not linked.
2 Power
On: Transmitter is powered on.
Off: Transmitter is powered off.
8
Front Panel
1 2 3 4
ID
Connector/Switch
Description
1 VIDEO OUT Connects to the Receiver.
2 IR OUT Connects to the supplied IR Emitter.
3 HDMI IN Connects to HDMI source devices.
4 EDID DIP Switch
Manage communication between
connected devices and transmission over
cable distances
Rear Panel
1
ID
Connector
Description
1 DC 5V Connects to the USB power lead.
9
Receiver
Top Panel
1 2
ID
Indicator
Description
1 Status
On: Transmitter and Receiver are linked.
Off: Transmitter and Receiver are not linked.
2 Power
On: Receiver is powered on.
Off: Receiver is powered off.
10
Front Panel
1 2 3 4
ID
Connector/Switch
Description
1 VIDEO IN
Connects to the Transmitter.
2 IR IN
Connects to the supplied IR receiver
(30KHz -50KHz)
3 HDMI OUT Connects to HDMI display device.
4 EQ
Manage communication between
connected devices and transmission over
cable distances.
Rear Panel
1
ID
Connector
Description
1 DC 5V Connects to the USB power lead.
11
Hardware Installation
1. Connect an HDMI source (such as a Blu-Ray, games console,
media server etc.) to Transmitter using quality HDMI cables.
2. Connect a good quality, well terminated Cat5e/6 cable between the
video output of the Transmitter and video input of Receiver.
Note: 40m/131ft is the recommended transmission distance for this
model and denotes perfect transmission conditions – including straight
cable runs with no electrical interference. If any of the above is a factor
in your installation, transmission range maybe affected.
3. Connect the HDMI display (LED/LCD display or projector) to the
HDMI output of the Receiver.
4. Connect IR emitters from the IR OUT port of Transmitter and firmly
attach the IR emitter eye directly over the infrared receiving sensors
of the source device to be controlled. Location of the emitter eye
may need to be adjusted later to achieve best IR performance.
5. Insert IR receivers into IR IN port of Receiver. Position of the IR
receiver eye on or near the source device, ensuing using a clear
line of sight to remote handset used to control it.
6. Connect the 5V USB power lead included to the Transmitter and
Receiver and power on all devices.
Check Power and Status lights are illuminated on both Transmitter
and Receiver to indicate a successful connection.
12
DVD
TV
2
DVD Remote
IR TX
4
HDMI
IR RX
CatX Cable
5
HDMI
1
3
Transmitter Receiver
13
EDID and EQ Management
EDID Management
The following table lists the EDID information built in the device.
Position
Functions
1 (Default) EDID Copy Mode (Copy EDID from display)
2 1080i, 2CH
3 1080p, 2CH
Note: Repower the transmitter for the changes to take effect.
EQ Management
The following table lists the EQ information built in the device.
Position
Transmission Distance
L 0-15 meters / 0-49ft.
M (Default) 20-40 meters / 67-130ft.
H 80 meters / 262ft.
Note: There is no need to repower the receiver after change EQ settings.
The unit will automatically equalize the signals for better viewing effects.
14
Troubleshooting
1. Why the display connected to the Receiver shows no picture?
Check that all the devices are powered on and working properly.
Check that all the cables are qualified and connected properly
Check that the display works properly, and that the source device
has normal signals output.
Make sure that the display device supports HDCP.
Check that the length of HDMI cable and CatX cable.
Check that no compatibility issues exist between Receiver and the
display. If so, replace the display with other models.
2. Why the display connected to Receiver displays snow or mosaic?
Check that all the cables are qualified and connected properly.
Check that the source input device has no problems, such as
snow, mosaic or a damaged disc. If so, replace it with another
normal input source.
Check that no compatibility issues exist between Receiver and the
display. If so, replace the display with other models.
AV Access Technology Co., Ltd.
B4, B block Tianrui Industry Park, Xinhe Fuyuan Rd,
Fuyong St., Baoan District, Shenzhen, China
America, Africa Sales & Market
Ms. Suze Leung suze@avaccess.com
Europe, Asia, Middle East Sales & Market
Ms. Jessica Lee jessica@avaccess.com
Tel: 0086 755 21620553
Fax: 0086 755 26883498
Loading...