AUVIO 4000014 User Manual
T H E P E R F O R M A N C E Y O U N E E D
®
TM
6.5’’ 80W 2-Way
In-Ceiling Speaker
User’s Guide 4000014
Please read this user’s guide before using your new
speaker.
2
2
Package Contents
Speaker
Template/Paint mask
User’s Guide
Features
Mounts flush inside your ceiling for a sleek appearance
Tweeter can be titled to direct the sound to best suit
the room
Two-way acoustic design provides great audio quality
from both ends of the sound spectrum
Gold-plated spring-loaded terminals help reduce
interference and work with any standard speaker wire
Foam edge forms a snug fit to reduce disruptive vibrations
Grille and frame can be painted to match your decor
Easy to install using the included template
Required Tools
To mount your speaker, you need these tools
(not supplied):
Drywall or keyhole saw
Phillips screwdriver
18-20 gauge speaker wire
Wire stripper
Pencil or marker
1 Prepare Speaker and
Location
Be sure the mounting surface is:
between
2
/5 inch and 1 3/8 inch (10 – 35mm) thick.
3
3
has at least 3
1
/8 inch (79 mm) clearance behind the
mounting surface. Avoid wall studs
or other objects that might block
the back of the speaker.
1. Remove the inner cardboard disc
from the supplied template/paint
mask and keep it for later. Use
the outer portion of the mask as a
template to mark the cutout hole size and location for
mounting the speaker.
2. Use a drywall or keyhole saw to cut the hole.
(Optional) Paint the Grille
nNote: Do not paint internal
speaker components. We
recommend you spray-paint the grille
so no paint blocks the holes.
1. Push any two opposite mounting
tabs and remove the grille.
2. Remove the dust cloth from
behind the grille.
3. Paint the grille and replace the
dust cloth after the paint is dry.
(Optional) Paint the Frame
To avoid paint entering the speaker,
remove the grille and insert the
supplied cardboard paint mask. After
the paint is dry, remove the paint
mask and replace the grille.
Template
Paint mask
Mounting tab
Loading...