AUVIO 4000013 User Manual

T H E P E R F O R M A N C E Y O U N E E D

®

TM

100W 2-Way

6.5’’ In-wall Speaker

User’s Guide 4000013

Please read this user’s guide before using your new speaker.

2

2

Package Contents

 Speaker
 Template/Paint mask

 User’s Guide

Features

 Mounts flush inside your wall for a sleek appearance
 Tweeter can be tilted to direct the sound to best suit

the room

 Two-way acoustic design provides great audio quality

from both ends of the sound spectrum

 Spring-loaded terminals work with any standard

speaker wire

 Foam edge forms a snug fit to reduce disruptive

vibrations

 Grille and frame can be painted to match your decor
 Easy to install using the included template

Required Tools

To mount your speaker, you need these tools
(not supplied):

 Drywall or keyhole saw
 Phillips screwdriver
 18-20 gauge speaker wire

 Wire stripper
 Pencil or marker

1 Prepare Speaker and

Location

Be sure the mounting surface:

 Is between

2

/5 – 13/8 inch (10 – 35 mm) thick.

3

3

 Has at least 3 inch (76 mm) clearance behind the

surface. Avoid wall studs or other objects that might
block the back of the speaker.

1. Remove the inner cardboard disc from

the supplied template/paint mask and
keep it for later. Use the outer portion
of the mask as a template to mark
the cutout hole size and location for
mounting the speaker.

2. Use a drywall or keyhole saw to cut

the hole.

(Optional) Paint the Grille

nNote: Do not paint internal speaker

components. Use spray paint on the
grille so no paint gets in or blocks the
holes.

1. Push any two opposite mounting

tabs and remove the grille.

2. Remove the dust cloth from behind

the grille.

3. Paint the grille and replace the dust cloth after the

paint is dry.

(Optional) Paint the Frame

To avoid paint entering the speaker,
remove the grille and insert the supplied
cardboard paint mask. After the paint is
dry, remove the paint mask and replace
the grille.

Template

Mounting Tab

Paint mask