Page 1
Menu Structure
English
Access Level 1: No key or password required
Access Level 2: Access by key
Access Level 3: Password restricted
System Status
Disable
Enable
Show Unit Properties
Show Alarms
Show Pre Alarms
Show Faults
Show Disablements
Show Tests
Show Supervisory
Show Activated Outputs/Inputs
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Disable
Time Span
Loop Inputs
Local Inputs
Routing Equipment
Loop I/O Carriers
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Enable /
Change
Disable
Time Span
Loop Inputs
Local Inputs
Routing Equipment
Loop I/O Carriers
Day Mode
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Loop Inputs
Local Inputs
Loop I/O Carriers
Mimic Panels
Activation Groups
External Interfaces
Detection Loops
Operator Panels
(Functions)
Door Control Units
Standard Control Units
Activated Fire Alarm Devices
Other Outputs
Activated Inputs
All Outputs/Inputs by Type
All Outputs/Inputs by Time
Show Member Points
Show Connected Units
Show Member Fire Alarm Devices
Show Neighbour Alarm Zones
Show Activating Detection Zones
Show Connected Units
Show Connected Units
(Not applicable to FAD, FARE and FWRE:)
Show Activating Detection Zones
Show Activating Points
Show Activating Inputs
Show Activation Groups
Show Activating Outputs
(Not applicable to FARE and FWRE:)
Show Connected Units
Show Connected Units
Show Connected Units
Show All Carrier Units
Show Carrier Points
Show Carrier Inputs
Show Carrier Outputs
(Applicable only if Mimic Panels are used)
Show Mimic Boards
Show Member Points
Show Connected Units
Report
Enter Service Mode
(turn the page)
Read Log
Show Topology
Show Date and Time
Software Version Info
Configuration Version Info
All Log Entries
Alarms
Alarms and Activations
Faults
Enable and Disable
Tests
Supervisory
Metrics
Internal Errors
Show Serial Port Settings
Show IP Address Settings
Show ESPA
Show MODBUS
Show VDR
Show Remote Access
116-P-APRIME2-MENUS/MGB, Rev. A, 2018-03-01
Show Settings
Show Events
Show Receivers
Show Settings
Show Status Registers
Show Command Registers
Show Server and Web Access
Show User Management
Show Clients
Show Client Proxy Server
Page 2
Enter Service Mode
Service
System Settings
Loop Operation
Unit Configuration
Unit Test
System Topology
Export and Import
Menu Structure
English
Save Configuration
Restart System
Day Mode Operation Times
Date and Time
Set Operator Panel Connection
IP Address Settings
Service Mode Password
Sound Patterns
Automatic Resound
DZ Delay Timers
DZ Global Dependency
Battery Parameters
Panel Name
Language
FARE and FWRE Disablement
Mains Power Fault Indication
Printer Setup
Configuration Check
System Shutdown
Restore Factory Settings
Enable Units
Disable Units
Change Disable Time Span
Show Polluted Detectors
Show Low Current Units
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Loop Inputs
Local Inputs
Loop I/O Carriers
Mimic Panels
Activation Groups
External Interfaces
Detection Loops
Operator Panels
Show Units Not Configured
Access Level 1: No key or password required
Access Level 2: Access by key
Access Level 3: Password restricted
Connect to Alarm Zone
Connect to Output
Connect to Disable Input Device
Connect to Local Alarm Delay Unit
Connect to Panel (special panel only)
Disconnect from Alarm Zone
Disconnect from Output
Disconnect from Disable Input Device
Disconnect from Local Alarm Delay Unit
Disconnect from Panel (special panel only)
Show Member Points
Show Connected Units
Connect to Neighbour Alarm Zone
Disconnect from Neighbour Alarm Zone
Show Member Fire Alarm Devices
Show Neighbour Alarm Zones
Show Activating Detection Zones
Move to Detection Zone (/Create New)
Connect to Output
Connect to Activation Group (/Create New)
Disconnect from Output
Disconnect from Activation Group
Show Connected Units
Move to Alarm Zone
(Functions)
Show Connected Units
(Not applicable to FAD, FARE and FWRE:)
Connect to Output
Disconnect from Output
Show Activating Detection Zones
Show Activating Points
Show Activating Inputs
Show Activating Groups
Show Activating Outputs
Move to Alarm Zone (applies to FAD only)
(Not applicable to FARE and FWRE:)
Show Connected Units
Connect to Output
Connect to Alarm Zone
Disconnect from Output
Disconnect from Alarm Zone
Show Connected Units
Show All Carrier Units
Show Carrier Points
Show Carrier Inputs
Show Carrier Outputs
Configure
Show Mimic Input s
Show Mimic Outputs
(Applicable only if Mimic
Panels are used)
Exit Service Mode
Detection Zones
Alarm Zones
Fire Alarm Devices
Loop Outputs
Local Outputs
Mimic Panels
Show Topology
Show All Faults
Clear Loop Config. – Restart System
Deactivate/Activate
Export Log
Select Configuration & Restart System
Backup Current Configuration
Export Configuration
Import Configuration
Connect to Output
Disconnect from Output
Show Member Points
Show Connected Units
Serial Port Settings
ESPA
MODBUS
VDR
Remote Access
Configure ESPA Settings
Configure ESPA Event s
Configure ESPA Receivers Table
Send ESPA T est Event
Configure MODBUS Settings
Congigure Status Registers
Configure Command Registers
Set Testbit to 0
Set Testbit to 1
Assign Unique MODBUS Indexes
Configure VDR Setting s
Send VDR Test Event
Server and Web Access
User Management
Clients
Client Proxy Server
116-P-APRIME2-MENUS/MGB, Rev. A, 2018-03-07
Loading...