AUTOVISION BCX 300 Users Manual

Order Number : GETEC-C1-09-135 FCC Part 15 Subpart C
Test Report Number : GETEC-E3-09-083 Page 1 / 1

APPENDIX H

: USER’S MANUAL

EUT Type: Bluetooth handsfree car kit

FCC ID.: XGVBCX-300

BT Hands-Free Car Kit

Bluetooth

Bluetooth

BCX--

BCX

®

®

300 User guide

300 User guide

Hands--

Hands

free car kit

free car kit

ITM Korea

[BCX-300] Package contents & features

Ensure that the following is included in the package;

ConfidentialandProprietary

Hands-free car kit

USB charging cable User guide

Sun visor clip

Cigar jack adapter [An optional item]

[Note] The basic package contents are a hands-free car kit, a sun visor clip, a USB charging cable, and an user guide.

Cigar jack adapter is an optional item separately sold or only contained in the full package.

[BCX-300] Product description

ConfidentialandProprietary

Call (Answer) Button

Volume up Button Volume down ButtonPower (On/Off) Button MIC Mute (On/ Off) Button

LED Indicator

MICCharging PortEar Set Jack

ConfidentialandProprietary

[BCX-300] Getting Started

1. Charging BCX-300

BCX-300 comes with a built-in rechargeable battery. Please ensure that your BCX-300 is fully charged before first use.

(1) Plug the mini USB 5 pin connector of the charging cable/or the cigar jack adapter into the charging port located on

the side of BCX-300.

(2) Charge BCX-300 through;

1) USB charging cable
You can charge BCX-300 directly from your PC or MAC by plugging the USB end of the charging cable into a USB port

in your personal computer. Make sure that your computer is on when trying to charge BCX-300.

2) Cigar jack adapter (An optional item)

Plug the cigar jack of the adapter into a car outlet.
(3) While charging, the RED LED light will turn on and remain lit until BCX-300 is fully charged.
(4) When charging is complete, the RED LED light will turn off. Unplug BCX-300 from the charging cable/or the cigar jack

adapter. It takes about 3 hours to charge a fully depleted battery of BCX-300.

▪ Low Battery Indication

When the battery is nearly depleted in either active or standby mode,
(1) BCX-300 will make a beep sound once every 30 seconds and
(2) The RED LED light will flash once every 4 seconds.

ConfidentialandProprietary

[BCX-300] Getting Started

2. Pairing BCX-300

BCX-300 works with Bluetooth® enabled devices. Before pairing your BCX-300 hands-free car kit for the first time, please
make sure that your mobile phone is Bluetooth® capable and the Bluetooth® features are enabled. Paring is only required
for the first time you use BCX-300 with your mobile phone. The hands-free car kit pairing procedure will be various depending
on the model of your mobile phone. Please refer to your mobile phone user guide for more detailed paring instructions.

▪ Steps for pairing BCX-300

(1) Make sure that your BCX-300 is off. (The LED indicator should not be flashing).
(2) Place BCX-300 within a meter away from your mobile phone.
(3) Activate your mobile phone’s Bluetooth function.
(4) There are two types of BCX-300 paring modes.

1) Manual pairing mode
Press and hold (Power) button for 7~8 seconds until BLUE & RED LED light rapidly flash alternately.

2) Auto pairing mode (Easy pairing)

① Press and hold ( Power) button for 2~3 seconds to turn BCX-300 on.
② When BCX-300 is turned on for the first time, it will automatically try auto reconnection function.

The function, auto reconnection, will be failed to activate and then BCX-300 will be in pairing mode as BLUE &
RED LED light rapidly flash alternately.

(5) Set the mobile phone to search for all available Bluetooth® devices around. When searching is complete, select

“BCX-300” from the list of devices shown.

(6) Enter the passkey “0000(Four zeros)” and press “OK” to pair BCX-300 with your mobile phone. When paring is

successfully done, BCX-300 will make the short beep sound twice rapidly and then the BLUE LED light will flash once
every 10 seconds.

(7) If prompted by the phone to connect, select “Yes” (This will vary between phones).