2
Cleaner
Space Isolator
Trailing Bar
mop pad （two）
Side brush（two）
Filter
（
two）
Dust Brush
Remote control
Auto charging
docking station
AC/DC Adaptor
Manual
Control Panel of Main Body:
Display Interface
LCD directive sign
Menu Display:
1. Date/week set display
2. Wheel rotation/speed display
3. “UV” lamp display
4. Auto “Auto” cleaning display
5. Spot “Spot” cleaning display
6. Current week display
7. malfunction display
8. Charging/power display
9. Time/error code display
Touch key:
1. UV lamp key
2. Auto cleaning key
3. Spot cleaning key
Auto
Spot
UV
UV
Aut o
Spo t
Spot
Auto
7.
05
10
I
ST OP PIN G
opening
Top of main body
Parts:
Dustbin key
Front bumper
Front wheel
UV sterilizing lamp
Left wheel
Floor brush
Main brush
Mop pad
Ground detection sensor
Battery cover
Side cleaning brush
Right wheel
Infrared signal receiver
Display screen
Touch button
Bottom of main body
Please place the power cord of the
adaptor along the wall, or it may
interfere with the brush or wheels.
Installation of Docking Station and Charging for the cleaner:
Figure 1
Figure 1
Figure 2
High Voltage! Electrical
hazard! Please dry your
Figure 2
High Voltage! Electrical
hazard! Please dry your
hands before using!
Automatic charging:
The Cleaner will search the Docking Station for charging automatically in case of low battery
during cleaning.
Figure 4
Figure 5
Figure 6
Assembly & Disassembly and Cleaning of Dustbin:
Assembly & Disassembly of Dustbin:
Figure 4
Figure 5
Figure 6 Figure 7
Figure 1 Figure 2
Figure 3
3
4
5
Assembly & Disassembly and Cleaning of Left/Right Wheel and Front Wheel:
Figure 1
Figure 2
Control panel:
6. Remote Control:
Auto
Spot
Clock
WED
F
Schedule
YUE
Speed
SUN
Charge
CHARGE
1
2．
3．
Power LED
4．
Charging indicator
5．
Signal transmitter
6．
Charging positive electrode
Charging negative electrode
Charging power DC socket
1
The Power LED will light when the Docking Station is
Power LED
connected with the power, or turn off if not connected.
2
The indicator will flicker while the recharger is connected
Charging indicator
with the cleaner.
3
Transmitting signal is the only way to lead the cleaner to
Signal transmitter
return the Docking Station for charging, so the signal
transmitter position should be clean for long without any
obstacle on it.
4-5
Recharging positive
The electrode and that of the Cleaner are connected to
& negative electrode
charge under contact mode, so the position should be
clean without any obstacle on it while using, or there will be
impact to the charging.
6
Charging power DC
The power DC socket, called recharger for short, used to
socket
connect output terminal DC24V of the adaptor, is the
charging transit station between the Cleaner and adaptor,
so the recharger should be placed against the wall firmly
and the adaptor cable should be away from the recharger,
or the Robot may have been impacted and winded.
Using Method & Functional Status of the Docking station :
Overall Display Function Instructions
No. Function Guide Function Information
3
6
5
4
2
1
1
1．Toggle switch
a Turn off
b Low
c High
Toggle switch
a Turn off
b Low
c High
Turn off, Low and High.
2
Infrared wall transmit-
Slide , then you can adjust the distance of the Space
ting signal head
Isolator.
3
Near-infrared transmit
-
The near-infrared transmitting signal makes the Cleaner
ting head
run outside the Space Isolator scope of 50-100cm without
any impact to it.
4
The Power LED will flicker once every 8s until the low
Power LED
battery after you slide to Low,
High, and
Slide to the position, then the power is off.
Slide to Low and turn on the power, you can select
the distance within 3m as required by infrared wall.
Slide to High and turn on the power, you can select
the distance within 6m as required by infrared wall.
Overall Display Function Instructions
No. Name Function Information
You can switch the function by sliding repeatedly:
the Cleaner works normally.
19
20
Failure Code
E001
Ground detection sensors
Clean the sensors at the front bottom of the cleaner
E002 Middle brush
Clean the rubbish such as hair, thread wrapped on
the brush
E003
Power off
Use the adaptor to charge , after full charged , then
use again
E004
Left &right wheel Check the left and right wheels , clean the rubbish
on it
Failure Cause
E005
Dustin poor contact
Check the dustbin and re-fix the dustbin after
cleaning
Loading...