Autotech 10.425.1632GK User Manual

A U T O T E C H

Installation Instructions

www.autotech.com

Part Number: 10.425.1632GK
Description: L/W FRONT SWAYBAR FOR B5 PASSAT

Notes:

This swaybar is a direct replacement for the original one. It is a simple, bolt on installation.

Procedure:

1) Place the car on jackstands so that both of the front
wheels are off the ground.

2) Remove the nut (1) that retains the outer link to
the stock swaybar, and pull the link out of the bar.

3) Unscrew the hexnuts (2) that retain the inner bush­ing clamps to the chassis and remove the clamps.

4) Install the new bushings onto the new swaybar, using
a liberal amount of waterproof grease (moly grease
for cv joints works well).

5) Install the new swaybar in the original posi­tion and mount the inner bushiong clamps.

Tighten nuts (2) to 30Nm / 22 ft lbs.

6) Push outer link into the swaybar end and install nut.

Tighten nut to 90Nm / 66 ft lbs.

Phone [phone] Fax [phone]-E Paseo Adelanto, San Juan Capistrano, CA 92675