Auto Page RS-855lcd User Manual
1
THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY
RS-855
lcd
PROFESSIONAL REMOTE CAR STARTER
WITH ALARM SYSTEM
&
2-WAY LCD COMMUNICATION
OPERATION MANUAL
2
TABLE OF CONTENTS:
A. REMOTE TRANSMITTER OPERATION …………………….………. 4
B. BUTTON LOCK ……………………………………………….……...…. 5
C. LED DISPLAY .…………….. ……..……………………….……………. 5
D. CHIRP INDICATOR ..………..………..……………………………..…. 5
E. PARKING LIGHT ………..………………………………………..….…. 6
F. ALARM OPERATION CONDITION .…..…………………………...…. 6
G. ACTIVE ARMING – ARM & LOCK .……..……………...……………. 6
Defective Sensor Reminder
Silent Arming / Disarming
Shock Sensor By -Pass
H. PASSIVE ARMING .………………………………………….…………. 7
Passive Arming with Passive Door Locking
Passive Arming By -Pass
I. ACTIVE DISARMING – UNLOCK & DISARM .………………………..7
Tamper Disarming
Pathway Illumination
Two Steps Door Unlock
Automatic Re-Arm
J. DISARMING WITHOUT A TRANSMITTER .…………….………...…. 8
Overrides the Alarm without Password Pin Code
Overrides the Alarm With Password Pin Code
K. VALET MODE .………………………………………….…………...….. 9
Enter Valet Mode
Exit Valet Mode
L. CAR LOCATOR .………………………………………………………... 9
M. PANIC FUNCTION .…………………….……………..….……….…... 9
N. TRIGGER THE SYSTEM ..……..………………..………….….……...10
Clear The Trigger Icons and Melody Sound
Stop The Melody Sound Only
Noise Abatement Circuit
O. ANTI CAR- JACKING .………………………………………….……...11
Active Anti Car Jacking
Passive Anti Car Jacking
Trigger The Anti Car Jacking Mode
Override The System To Turn Off Anti Car Jacking
P. SYSTEM’S TRIGGER CHECK …………………….….….…..….…..11
Q. SYSTEM’S STATUS CHECK …………………..……….…….….…..12
R.DRIVER PAGING (OPTION)…………..…………………….………....12
S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION …….…..12
T. IGNITION CONTROL THE DOOR LOCK/UNLOCK. ……….….…..13
U. TRUNK RELEASE (CHANNEL 3) OUTPUT ………..……….………13
V. CHANNEL 4 TIMER CONTROL OUTPUT ………..…………………13
W. CHANNEL 5 TIMER CONTROL OUTPUT ………..……………….. 13
X. CHANNEL 6 TIMER CONTROL OUTPUT ………..………………... 13
X. SECOND VEHICLE SECURITY OPERATION……………………….13
Y. POWER ON MEMORY: ………..…………...………….…….…….…. 13
3
REMOTE START OPERATION:
A. TO REMOTE START THE VEHICLE ………..…………..…………. 14
Safe Start (Child safety mode)
B. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE
START……………………………………………………………………14
C. TEMPORARY STOP FEATURE …………………..………...….…… 14
D. TURBO TIMER START FEATURE ……………………………………15
D. TIMER / TEMPERATURE START ……………….………..………… 15
3 Hours Timer Start With Temperature-Control Off
3 Hours Timer Start With Temperature-Control
Daily Timer Start
Exit the Timer Start
E. TEMPERATURE CHECK
F. TO TURN OFF THE REMOTE START
G. SHUT -DOWN INPUT FOR REMOTE STARTER
H. DISABLING THE REMOTE START SYSTEM
…………………….….……….…….….… 16
………………………..…...…16
…………………...… 16
………...….…...… 16
LCD REMOTE TRANSMITTER:
A. BATTERY REPLACEMENT
B. THE REMOTE LCD ICONS WITH FUNCTION
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER
1. Screen Lamp ON
2. Power Save Mode
3. Clear The Flash Icon and Melody Sound
4. Stop The Melody Sound.
5. Button Lock
6. Vibration / Melody Mode
7. Enable / Disable Bi Sound While Pressing Button:
8. Low Battery Indication.
9. Set Up Fixed Count Down Timer
10. Out Of The Range Check
D. TIMER SETTING
1. Timer Setting.
2. Alert Alarm Timer Setting
3. Count Down Timer Setting
4. Time Set -Up For “Daily Timer Start”
……………………………….…………………….… 21
………………………………………..… 17
……………..…...… 18
WARNINGS:
……… 19
4
As with any product that performs automatic functions, there are certain safety
precautions that you must
practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is
corrected.
8. The use and operations of this system is the sole responsibility of the
operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle
running on public streets.
10. Do not start the vehicle by remote while the standard transmission
vehicle is parked at a steep place.
OPERATION:
A. REMOTE TRANSMITTER OPERATION:
Transmitter
Button
-
+
+
-
-
System Function Remark
Lock Doors & Arm System
Panic function Press and Hold for 3 seconds.
Car Locator Under armed mode
Arm and Delete The 2 Stage
Shock Sensor.
Silent Arming / Disarming Ignition in "off" position.
Active Anti Car-Jacking
Mode
Unlock Doors & Disarm
System
Two Steps Door Unlock &
Disarm System
Trunk Release (Channel 3) Press and Hold for 2 seconds
Passive Arming By-pass While the system Disarmed.
Press twice within 3 seconds
Ignition in "on" position press and hold for
2 seconds
Press twice within 3 seconds.
( )
+
-
-
Button Lock
Arm System and Hidden
Alarm Function
Activate or Turn Off The
Remote Start
Channel # 4 Timer Output (4)
Press within 3 seconds and Hold
button for 2 seconds
Under disarm mode, press within 3
seconds and Hold button
Press twice within 3 seconds.
5
+
+
Channel # 5 Timer Output (5)
Channel # 6 Timer Output (6)
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
- (C)
- -
(C)
- ( )
- ( )
- ( )
- ( )
- -
System’s Trigger Record
Check
System’s Status Check Press within 3 seconds
Button Lock
Optional Driving Pager Press within 3 seconds
Monitor Indoor Temperature Press within 3 seconds
Daily Timer Start Press within 3 seconds
LCD screen lamp turns on for
5 seconds.
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Warning: Press the button two times when the battery
compartment is empty, then insert the new battery.
B. BUTTON LOCK:
It is useful if you want to disable the transmission function of the remote
control temporarily to prevent from any inadvertent pressing of buttons by
others.
1. The XT -85s Standard transmitter:
Press within 3 seconds
Press within 3 seconds and
Hold
button for 2 seconds
Press and hold fo r 1 second
Press within 3 seconds
Press the button first, within 3 seconds press and hold the ( )
button for 2 seconds to activate or cancel the button lock function. The “Red
LED” will pause flash for few seconds to indicate the remote control
transmitter is on “Button Lock” mode when pressing the transmitter button.
2. The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
“Button Lock” mode.
C. LED display:
LED Function LED Function
Off Disarmed Zone 1 / Warn -Away Trigger
Slow Armed 2 flashes... Zone 2 / Trigger on Trunk/Hood
6
will clear the flash icon
Flash pause
Flash Passive Starter Disable
Fast Flash Passive Arming
On (Solid) Valet Mode
3 flashes...
pause
4 flashes...
pause
5 flashes...
pause
Zone 3 / Trigger on Door Switch
Zone 4 / Trigger on Shock
Sensor
Zone 5 / Trigger on Ignition
Switch
D. CHIRP INDICATORS: E. PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Defective Reminder 3 flashes Disarm / Triggered
4 chirps Disarm / Trigge red 12 flashes Car Locator
6 chirps Car Locator Constant On Under Remote
Start
F. ALARM OPERATING CONDITION:
Siren / Horn
1. Arming 1 or 3 Chirps 1 Flash
2. Disarming 2 or 4 Chirps
3. Trigger Alarming Flashes
4. Passive
Starter
Disable
5. Panic Alarming Flashes Flashes
6. Car-Jacking Alarming Flashes Disable Flashes
7. Car Locator 6 Chirps 12 Flashes Locking
G. ACTIVE ARMING – LOCK & ARM:
1. Press button on the transmitter.
2.The siren will chirp once and parking light will flash once indicating that the
system is now armed. The vehicle door will lock upon arming when
interfaced with the security system.
System Arm
Parking
Light
2 or 3
Flashes
Door Ajar
LED Doors Starter Dome Light
Slow
Flash
Unlocking
Slow
Flash
Fast
Flash
Locking Disable
Turns on for 30
-second
Disable Flashes
Disable
Trunk / Hood Ajar
Clear The Flash Icon:
Press the button 3
times within 3 seconds
on
the LCD screen
transmitter.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have
left a door, trunk, or hoodlid ajar.
7
SILENT ARMING / DISARMING: Press the transmitter and button at the
same time will arm or disarm your security system, No chi rp sound will be
heard, arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR BY -PASS: Press the button on the transmitter two times
within 3 seconds will arm the security system and by-pass the shock sensor.
The system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle.
H. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after the
last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30
seconds. If you reopen any door / hood / trunk, the security sys tem LED will
stop flashing. It will begin flashing again once all vehicle entrances are
closed.
3. After 30-second timer has elapsed, the security system will automatically
“ARM”. The siren will chirp [1] time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING:
The vehicle doors will automatically lock after passive arming cycle has
been completed.
PASSIVE ARMING BY -PASS: While the system is disarmed, Press the
buttons twice, the system will respond with [1] chirp and LED will turn “ON”.
The security system will remain in this temporary state for as long as you
wish. To exit passive by-pass, press the transmitter or button and
the system will return to normal status.
I. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press button on the transmitter.
2. The siren will chirp twice and parking light flash twice to indicating that
the security system is now disarmed. The vehicle’s door will unlock and
dome light turns on for 30 seconds upon disarming when interfaced with
the security system.
8
Ignition Trigger
System Disarm
Shock SensorTrgr
Doors Trigger Trunk/HoodTrgr Warn away Trigger
Clear The Flash Icon:
Press the button 3
times within 3 seconds will
clear the flash icon on the
TAMPER DISARMING: If alarm is triggered upon disarm, the systems siren
will chirp 4 times, and parking light flash 3 times.
PATHWAY ILLUMINATION: This feature turns the parking light “ON” for 30
seconds upon a unlock signal and for 10 seconds upon the lock signal.
TWO STEPS DOOR UNLOCK:
This feature will independently unlock the driver’s door only when disarming
the security system. Pushing the button a second time within 3 seconds
will unlock the other doors.
AUTOMATIC RE -ARM:
If thi s feature is selected, the security system will automatically re-arm itself in
60 seconds after disarming with remote transmitter. Automatic rearm will
cancel if any door is opened before the 60 seconds timer has elapsed.
J. DISARMING WITHOUT A TRANSMITTER
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:
(Factory Default Setting)
The Override function may be used if the remote transmitter is lost or
inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position.
2. (Alarm will sound.)
3. Within 10 seconds push and release the valet switch, The alarm will stop
sounding and enter the disarm mode. You can now start and operate the
vehicle normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Unlike valet switch easily found, and defeated, this security system allows the
consumer to program a password pin code. Offering a higher level of
security.
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will
sound.)
2. Within 5 seconds, enter your chosen the first digit code by pressing and
releasing the Valet Switch. (When finished above procedures, system's
siren stop alarming, lights stop flashing, but the vehicle can’t be started.)
3. Within 15 seconds of the last digit code enter (the 1st code), turn the
Ignition Switch “OFF” and then “ON”.
LCD screen transmitter.
9
From the disarmed condition,
Push and hold valet switch for 2
seconds until the LED turns on.
The LED wills remain on as long
button to active
car locator function. The siren will chirp 6 times.
The parking light will flash 12 times, for you to
4. Within 15 seconds, enter your chosen of the second digit code by pressing
and releasing the Valet Switch.
5. Turn the ignition switch “OFF” position. 4] Chirps form siren/horn, [3] flash
from parking light to indicate the system was disarmed.
Note 1: You must override the alarm within 60 seconds. If not, the system will
automatically re -arm.
EXAMPLE: To Override The System With The Password Code 83,
1. Enter the vehicle and turn the ignition switch to 'ON’ position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When
finished above procedures, system's siren stops alarming, lights stop flashing,
and sensor stops trigger, but the vehicle can not be started or driven away.)
3. Within 15 seconds of the last digit code enter (the 1st code), turn the Ignition
Switch “Off” and then “ON”.
4. Within 15 seconds, Press and Release the Valet Switch 3 times
5. Turn the Ignition Switch to “Off” position. [4] Chirps form siren/horn, [3] flash
from parking light to indicate the system was disarmed.
K. VALET MODE: (System in Disarm or Valet mode)
The valet switch allows you to temporarily bypass all alarm function,
eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, all alarm functions
and remote start functions are bypassed, however the remote panic feature
and remote door locks will remain operational. To use the valet mode, the
system must first be disarmed either by using your remote transmitter, or by
operating the Manual overr ide sequence.
Enter Valet Mode:
1.
turn the ignition to “ON” position.
2.
Remote Door Lock
Remote Door Unlock
Exit Valet Mode:
1.Return to normal operation, turn ignition 'on'.
2.Push and hold valet switch for 2 seconds, The LED will turn off indicating
L. CAR LOCATOR
Under armed mode, press the
easily locate your car.
M. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the
alarm in case emergency.
as the system is in 'valet mode'.
the system is exiting the valet mode.
Loading...