Autonics PS Series, PSN Series Catalog Page

PS/PSN Series

Rectangular, Standard Type Proximity Sensor

Features

● Excellent noise immunity with specialized sensor IC

● Long life cycle, reliable performance, economical, and

easy-to-install

● Operation indicator (red LED)

● Built-in surge protection circuit

● Built-in output short over current protection circuit (DC types)

● Built-in reverse polarity protection circuit (DC 3-wire types)

● IP67 protection structure (IEC standard)

[PSN17]

● Alternate frequency models allow adjacent installation of

multiple sensors without interference
(PSN17- -F)

Please read “Safety Considerations”
in the instruction manual before using.

Specifications

● DC 2-wire type

Model

Sensing side Front side Upper side

Sensing distance 5mm

Hysteresis Max. 10% of sensing distance

Standard sensing target 18×18×1mm (iron)

Setting distance 0 to 3.5mm
Power supply

(operating voltage)
Leakage current Max. 0.6mA

1

Response frequency

※

Residual voltage Max. 3.5V

A󰀨ection by Temp.

Control output 2 to 100mA

Insulation resistance Over 50MΩ (at 500VDC megger)

Dielectric strength 1,500VAC 50/60Hz for 1 min

Vibration 1mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Shock 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times

Indicator Operation indicator: Red LED

Environ­ment

Ambient temperature -25 to 70℃, storage: -30 to 80

Ambient humidity 35 to 95%RH, storage: 35 to 95%RH

Protection circuit Surge protection circuit, output short over current protection circuit

Protection structure IP67 (IEC standard)

Cable

Approval

Unit weight Approx. 71g

※

1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of

the standard sensing target, 1/2 of the sensing distance for the distance.

※

Environment resistance is rated at no freezing or condensation.

PSNT17-5DO
PSNT17-5DC

12-24VDC
(10-30VDCᜡ)

700Hz

Max. ±10% for sensing distance at ambient temperature 20℃

Ø4mm, 2-wire, 2m

(AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm)

※

The existing PST17 is upgraded its function and design and changed as PSNT17.

※

The case color of Normal Close type is changed from orange to gray.

PSNT17-5DOU
PSNT17-5DCU

ᜡ

℃

SENSORS

CONTROLLERS

MOTION DEVICES

SOFTWARE

(A)
Photoelectric
Sensors

(B)
Fiber Optic
Sensors

(C)
LiDAR

(D)
Door/Area
Sensors

(E)
Vision
Sensors

(F)
Proximity
Sensors

(G)
Pressure
Sensors

(H)
Rotary
Encoders

(I)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets

F-161

PS/PSN Series

Specifications

DC 3-wire type

PS Series

●

Environment

Sensing side Front side Upper side Front side
Sensing distance 4mm 30mm
Hysteresis Max. 10% of sensing distance
Standard sensing target 12×12×1mm (iron) 90×90×1mm (iron)
Setting distance 0 to 2.8mm 0 to 21mm
Power supply

(operation voltage)
Current consumption Max. 10mA
Response frequency
Residual voltage Max. 1.5V

A󰀨ection by Temp. Max. ±10% for sensing distance at ambient temperature 20℃

Control output Max. 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)
Dielectric strength 1,500VAC 50/60Hz for 1 min
Vibration 1mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Environment

Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Protection structure IP67 (IEC standard)

Cable

Material

Approval
Weight

PSN Series (frame size 17mm)

●

Model

Sensing side Front side Upper side Front side Upper side Front side Upper side
Sensing distance 5mm 8mm
Hysteresis Max. 10% of sensing distance
Standard sensing target
Setting distance 0 to 3.5mm 0 to 5mm
Power supply

(operation voltage)
Current consumption Max. 10mA

Response frequency
Residual voltage Max. 1.5V

A󰀨ection by Temp.

Control output Max. 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)
Dielectric strength 1,500VAC 50/60Hz for 1 min
Vibration 1mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock 500m/s² (approx. 50G) in X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Environment

Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Protection structure
Cable Ø4mm, 3-wire, 2m (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm)
Material Case: Heat-resistant acrylonitrile butadiene styrene, Standard cable (black): Polyvinyl chloride (PVC)
Approval

Weight

※2

※2

Ambient
temperature

Ambient
humidity

Ambient
temperature

Ambient
humidity

PS12-4DN
PS12-4DP
PS12-4DN2

12-24VDC
(10-30VDCᜡ)

1

※

500Hz 50Hz

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

Ø4mm, 3-wire, 2m Ø5mm, 3-wire, 2m

AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm

Case: Heat-resistant acrylonitrile butadiene styrene,
Standard cable (black): Polyvinyl chloride (PVC)

Approx. 77g (approx. 62g) Approx. 256g (approx. 220g)

PSN17-5DN
PSN17-5DP

PSN17-5DN2
PSN17-5DP2

PSN17-5DN-F

18×18×1mm (iron) 25×25×1mm (iron)

12-24VDC
(10-30VDCᜡ)

1

※

700Hz 200Hz

Max. ±10% for sensing distance at ambient temperature 20℃

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

IP67 (IEC standard)

Approx. 71g Approx. 70g

ᜡ

ᜡ

PSN17-5DNU
PSN17-5DPU

PSN17-5DN2U
PSN17-5DP2U

※

The existing PST17 is upgraded its function and design and changed as PSN17.

※

The case color of PNP output type is changed from orange to gray.

PS50-30DN
PS50-30DP
PS50-30DN2
PS50-30DP2

Case: Polybutylene terephthalate,
Standard cable (black): Polyvinyl

chloride (PVC)

PSN17-8DN-F
PSN17-8DP-F

PSN17-8DN2-F

PSN17-8DNU-F
PSN17-8DPU-F

PSN17-8DN2U-F

℃

℃

PS12-4DNU
PS12-4DPU
PS12-4DN2U

※

The case color of Normally Closed type is changed from orange to gray.

PSN17-8DN
PSN17-8DP

PSN17-8DN2
PSN17-8DP2

PSN17-8DNU
PSN17-8DPU

PSN17-8DN2U
PSN17-8DP2U

F-162

Rectangular, Standard Type

Specifications

● PSN Series (frame size 25/30/40mm)

PSN25-5DN

Model

PSN25-5DP
PSN25-5DN2
PSN25-5DP2

Sensing side Front side
Sensing distance 5mm 10mm 15mm 20mm
Hysteresis Max. 10% of sensing distance
Standard sensing target

25×25×1mm (iron) 30×30×1mm (iron) 45×45×1mm (iron) 60×60×1mm (iron)
Setting distance 0 to 3.5mm 0 to 7mm 0 to 10.5mm 0 to 14mm

Power supply
(operation voltage)

Current consumption Max. 10mA
Response frequency

12-24VDC

(10-30VDCᜡ)

1

※

300Hz 250Hz 200Hz 100Hz

ᜡ

Residual voltage Max. 1.5V

A󰀨ection by Temp.

Max. ±10% for sensing distance at ambient temperature 20℃

Control output Max. 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)
Dielectric strength 1,500VAC 50/60Hz for 1 min
Vibration 1mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock 500m/s² (approx. 50G) in X, Y, Z direction for 3 times
Indicator

Environ­ment

Ambient
temperature
Ambient
humidity

Operation indicator: Red LED

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Protection structure

IP67 (IEC standard)
Cable Ø4mm, 3-wire, 2m (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm)
Material Case: Heat-resistant acrylonitrile butadiene styrene, Standard cable (black): Polyvinyl chloride (PVC)
Approval

※2

Weight

Approx. 70g Approx. 111g Approx. 185g

PSN30-10DN
PSN30-10DP

PSN30-10DN2
PSN30-10DP2

℃

● AC 2-wire type

Model

PSN25-5AO

PSN25-5AC

Sensing side Front side
Sensing distance 5mm 10mm 15mm 20mm
Hysteresis Max. 10% of sensing distance
Standard sensing target 25×25×1mm (iron) 30×30×1mm (iron) 45×45×1mm (iron) 60×60×1mm (iron)
Setting distance 0 to 3.5mm 0 to 7mm 0 to 10.5mm 0 to 14mm
Power supply

(operating voltage)
Leakage current Max. 2.5mA
Response frequency

100-240VACᜠ

(85-264VACᜠ)

1

※

20Hz
Residual voltage Max. 10V

A󰀨ection by Temp.

Max. ±10% for sensing distance at ambient temperature 20℃

Control output 5 to 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)
Dielectric strength 1,500VAC 50/60Hz for 1 min
Vibration 1mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock 500m/s² (approx. 50G) in X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Environ­ment

Ambient

temperature

Ambient

humidity

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

Protection circuit Surge protection circuit
Protection structure IP67 (IEC standard)
Cable Ø4mm, 2-wire, 2m (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25mm)
Approval
Unit weight Approx. 65g Approx. 106g Approx. 152g

※

1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard

sensing target, 1/2 of the sensing distance for the distance.

※

Environment resistance is rated at no freezing or condensation.

PSN30-10AO
PSN30-10AC

℃

※

The case color of Normally Closed type is changed from orange to gray.

PSN30-15DN
PSN30-15DP

PSN30-15DN2
PSN30-15DP2

PSN30-15AO
PSN30-15AC

PSN40-20DN
PSN40-20DP
PSN40-20DN2
PSN40-20DP2

PSN40-20AO
PSN40-20AC

F-163

SENSORS

CONTROLLERS

MOTION DEVICES

SOFTWARE

(A)
Photoelectric
Sensors

(B)
Fiber Optic
Sensors

(C)
LiDAR

(D)
Door/Area
Sensors

(E)
Vision
Sensors

(F)
Proximity
Sensors

(G)
Pressure
Sensors

(H)
Rotary
Encoders

(I)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets