Autonics PRW Series Catalog Page

PRW Series

Cylindrical Cable Connector Type Proximity Sensor

Features

●

Shorten the time of maintenance with the body

● Improved the noise immunity with dedicated IC

● Built-in reverse polarity protection circuit (DC 3-wire type)

● Built-in surge protection circuit

● Built-in output short over current protection circuit

● IP67 protection structure (IEC standard)

● Replaceable for micro switches and limit switches

Please read “Safety Considerations”
in the instruction manual before using.

Specifications

※

● DC 2-wire type

PRWT08-1.5DO
PRWT08-1.5DC
PRWT08-1.5DO-I

Model

Diameter of
sensing side

PRWT08-1.5DC-I
PRWT08-1.5DO-V
PRWT08-1.5DC-V
PRWT08-1.5DO-IV
PRWT08-1.5DC-IV

8mm 12mm 18mm 30mm

Sensing distance 1.5mm 2mm 4mm 5mm 8mm 10mm

Installation Shield (ush)

Hysteresis Max. 10% of sensing distance
Standard sensing

target

8×8×1mm (iron) 12×12×1mm (iron)

Setting distance 0 to 1.05mm 0 to 1.4mm 0 to 2.8mm 0 to 3.5mm 0 to 5.6mm 0 to 7mm 0 to 10.5mm

Power supply
(operation voltage)

12-24VDC
(10-30VDCᜡ)

Leakage current Max. 0.6mA
Response

frequency

1

※

Residual voltage
A󰀨ection by Temp.

1.5kHz 1kHz 1.5kHz 500Hz 350Hz

2

※

Max. 3.5V (non-polarity type is max. 5V)
Max. ±10% for sensing distance at ambient temperature 20℃

Control output 2 to 100mA
Insulation resistance Over 50MΩ (at 500VDC megger)

Dielectric strength 1,500VAC 50/60Hz for 1 min

Vibration 1mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Shock 500m/s2 (approx. 50G) in each X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Environ-

ment

Ambient
temperature

Ambient
humidity

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

Protection circuit Surge protection circuit
Protection structure IP67 (IEC standard)

Material

Cable

Approval

3

※

Weight

※

1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard

sensing target, 1/2 of the sensing distance for the distance.

※

2: Before using non-polarity type, check the condition of connected device because residual voltage is 5V.

※

3: The weight includes packaging. The weight in parenthesis in for unit only.

※

Please fasten the vibration part with PTFE type.

※

The ' ' of model name is for power type. 'D' is 12-24VDC, 'X' is non-polarity 12-24VDC.

※

The last 'V' of model name is for the model with oil-resistance reinforced cable.

※

Environment resistance is rated at no freezing or condensation.

Case/Nut: Nickel plated brass, Washer: Nickel plated iron, Sensing surface: Heat-resistant Acrylonitrile butadiene styrene,
Standard cable (black): Polyvinyl chloride (PVC), Oil resistant cable (gray): Oil resistant polyvinyl chloride (PVC)

Ø4mm, 2-wire, 300mm, M12 connector

(AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: Ø1.25mm)

Approx. 44g (approx. 32g)

F-80

PRWT08-2DO
PRWT08-2DC
PRWT08-2DO-I
PRWT08-2DC-I
PRWT08-2DO-V
PRWT08-2DC-V
PRWT08-2DO-IV
PRWT08-2DC-IV

Non-shield

(non-ush)

ᜡ

PRWT12-2DO
PRWT12-2DC
PRWT12-2DO-I
PRWT12-2DC-I

Shield (ush)

PRWT12-4DO
PRWT12-4DC
PRWT12-4DO-I
PRWT12-4DC-I

Non-shield

(non-ush)

℃

Surge protection circuit, output short over current protection circuit

Approx. 54g (approx. 42g) Approx.70g (approx. 58g) Approx. 134g (approx. 122g)

When the model name is X, it is non-polarity model.

PRWT30-15DO
PRWT30-15DC
PRWT30-15DO-I
PRWT30-15DC-I
PRWT30-15DO-V
PRWT30-15DC-IV

15mm
Non-shield

(non-ush)

45×45×1mm

(iron)

PRWT18-5DO
PRWT18-5DC
PRWT18-5DO-I
PRWT18-5DC-I

Shield (ush)

18×18×1mm

(iron)

PRWT18-8DO
PRWT18-8DC
PRWT18-8DO-I
PRWT18-8DC-I

Non-shield

(non-ush)

25×25×1mm

(iron)

PRWT30-10DO
PRWT30-10DC
PRWT30-10DO-I
PRWT30-10DC-I
PRWT30-10DO-V
PRWT30-10DC-IV

Shield (ush)

30×30×1mm

(iron)

400Hz 200Hz

(for PRWT08 Series: ±20% max.)

Ø5mm, 2-wire, 300mm, M12 connector

Cylindrical Cable Connector Type

Specifications

● DC 3-wire type

PRW08-1.5DN
PRW08-1.5DP
PRW08-1.5DN2
PRW08-1.5DP2
PRW08-1.5DN-V

Model

Diameter of
sensing side

PRW08-1.5DP-V
PRW08-1.5DN2-V
PRW08-1.5DN2-V
PRWL08-1.5DN
PRWL08-1.5DP
PRWL08-1.5DN2
PRWL08-1.5DP2

8mm 12mm 18mm 30mm

Sensing distance 1.5mm 2mm 4mm 5mm 8mm 10mm 15mm

Installation Shield (ush)

Hysteresis Max. 10% of sensing distance

Standard sensing target 8×8×1mm (iron) 12×12×1mm (iron)

Setting distance 0 to 1.05mm 0 to 1.4mm 0 to 2.8mm 0 to 3.5mm 0 to 5.6mm 0 to 7mm 0 to 10.5mm

Power supply
(operation voltage)

Current consumption Max. 10mA
Response frequency

12-24VDC
(10-30VDCᜡ)

1

※

1.5kHz 1kHz 1.5kHz

Residual voltage Max. 2V Max. 1.5V
A󰀨ection by Temp.

Max. ±10% for sensing distance at ambient temperature 20℃

Control output 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)

Dielectric strength 1,500VAC 50/60Hz for 1 min

Vibration 1mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Shock 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Environ-

ment

Ambient
temperature

Ambient humidity

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH
Protection circuit Surge protection circuit, Reverse polarity protection circuit, output short over current protection circuit
Protection structure IP67 (IEC standard)

Material

Cable

Case/Nut: Nickel plated brass, Washer: Nickel plated iron, Sensing surface: Heat-resistant Acrylonitrile butadiene styrene

Standard cable (black): Polyvinyl chloride (PVC), Oil resistant cable (gray): Oil resistant polyvinyl chloride (PVC)

Ø4mm, 3-wire, 300mm, M12 connector Ø5mm, 3-wire, 300mm, M12 connector

(AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: Ø1.25mm)
Approval

2

※

Weight

※

1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard

PRW: Approx. 44g (approx. 32g)

PRWL: Approx. 46g (approx. 34g)

sensing target, 1/2 of the sensing distance for the distance.

※

2: The weight includes packaging. The weight in parenthesis in for unit only.

※

he last 'V' of model name is for the model with oil-resistance reinforced cable.

T

※

Environment resistance is rated at no freezing or condensati

PRW08-2DN
PRW08-2DP
PRW08-2DN2
PRW08-2DP2
PRW08-2DN-V
PRW08-2DP-V
PRW08-2DN2-V
PRW08-2DP2-V
PRWL08-2DN
PRWL08-2DP
PRWL08-2DN2
PRWL08-2DP2

Non-shield

(non-ush)

ᜡ

PRW12-2DN
PRW12-2DP
PRW12-2DN2
PRW12-2DP2

Shield (ush)

PRW12-4DN
PRW12-4DP
PRW12-4DN2
PRW12-4DP2

Non-shield

(non-ush)

500Hz

℃

Approx. 54g (approx. 42g)

on.

PRW18-5DN
PRW18-5DP
PRW18-5DN2
PRW18-5DP2
PRWL18-5DN
PRWL18-5DP
PRWL18-5DN2
PRWL18-5DP2

Shield (ush)

18×18×1mm

(iron)

PRW18-8DN
PRW18-8DP
PRW18-8DN2
PRW18-8DP2
PRWL18-8DN
PRWL18-8DP
PRWL18-8DN2
PRWL18-8DP2

Non-shield

(non-ush)

25×25×1mm

(iron)

350Hz 400Hz 200Hz

(for PRW(L)08 series: ±20% max.)

PRW: Approx. 70g (approx. 58g)
PRWL: Approx. 90g (approx. 78g)

PRW30-10DN
PRW30-10DP
PRW30-10DN2
PRW30-10DP2
PRW30-10DN-V
PRW30-10DP-V
PRW30-10DN2-V
PRW30-10DP2-V
PRWL30-10DN
PRWL30-10DP
PRWL30-10DN2
PRWL30-10DP2

Shield (ush)

30×30×1mm

(iron)

PRW30-15DN
PRW30-15DP
PRW30-15DN2
PRW30-15DP2
PRW30-15DN-V
PRW30-15DP-V
PRW30-15DN2-V
PRW30-15DP2-V
PRWL30-15DN
PRWL30-15DP
PRWL30-15DN2
PRWL30-15DP2

Non-shield

(non-ush)

45×45×1mm

(iron)

PRW: Approx. 134g (approx. 122g)
PRWL: Approx. 195g (approx. 158g)

SENSORS

CONTROLLERS

MOTION DEVICES

SOFTWARE

(A)
Photoelectric
Sensors

(B)
Fiber Optic
Sensors

(C)
LiDAR

(D)
Door/Area
Sensors

(E)
Vision
Sensors

(F)
Proximity
Sensors

(G)
Pressure
Sensors

(H)
Rotary
Encoders

(I)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets

F-81

PRW Series

● AC 2-wire type

Model

Diameter of
sensing side

Sensing distance 2mm 4mm 5mm 8mm 10mm 15mm

Installation Shield (ush)

Hysteresis Max. 10% of sensing distance

Standard sensing target 12×12×1mm (iron)

Setting distance 0 to 1.4mm 0 to 2.8mm 0 to 3.5mm 0 to 5.6mm 0 to 7mm 0 to 10.5mm

Power supply
(operation voltage)

Leakage current Max. 2.5mA
Response frequency
Residual voltage Max. 10V
A󰀨ection by Temp.
Control output 5 to 150mA 5 to 200mA
Insulation resistance Over 50MΩ (at 500VDC megger)

Dielectric strength 2,500VAC 50/60Hz for 1 min

Vibration 1mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Shock 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Indicator Operation indicator: Red LED

Ambient temperature

Environ-

ment

Ambient humidity
Protection circuit Surge protection circuit
Protection structure IP67 (IEC standard)

Material

Cable

Approval

2

※

Weight

※

1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard

sensing target, 1/2 of the sensing distance for the distance.

※

2: The weight includes packaging. The weight in parenthesis in for unit only.

※

he last 'V' of model name is for the model with oil-resistance reinforced cable.

T

※

Environment resistance is rated at no freezing or condensati

PRW12-2AO
PRW12-2AC

12mm 18mm 30mm

100-240VAC
(85-264VACᜠ)

1

※

20

Hz

Max. ±10% for sensing distance at ambient temperature 20℃

-25 to 70℃, storage: -30 to 80

35 to 95%RH, storage: 35 to 95%RH

Case/Nut: Nickel plated brass, Washer: Nickel plated iron, Sensing surface: Heat-resistant Acrylonitrile butadiene styrene,
Standard cable (black): Polyvinyl chloride (PVC)

Ø4mm, 2-wire, 300mm,
M12 connector

AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: Ø1.25mm

ᜢ

Approx. 54g (approx. 42g)

PRW12-4AO
PRW12-4AC

Non-shield

(non-ush)

ᜠ

PRW18-5AO
PRW18-5AC
PRWL18-5AO
PRWL18-5AC

Shield (ush)

18×18×1mm

(iron)

℃

Ø5mm, 2-wire, 300mm, M12 connector

PRW: Approx. 78g (approx. 66g)
PRWL: Approx. 90g (approx. 78g)

on.

PRW18-8AO
PRW18-8AC
PRWL18-8AO
PRWL18-8AC

Non-shield

(non-ush)

25×25×1mm

(iron)

PRW30-10AO
PRW30-10AC
PRWL30-10AO
PRWL30-10AC

Shield (ush)

30×30×1mm

(iron)

PRW: Approx. 134g (approx. 122g)
PRWL: Approx. 195g (approx. 158g)

PRW30-15AO
PRW30-15AC
PRWL30-15AO
PRWL30-15AC

Non-shield

(non-ush)

45×45×1mm

(iron)

F-82