Page 1
Download and Install the
AutoMeter DashLink App from the
Google Play Store or Apple App
Store on your mobile device.
Plug the DashLink Dongle into
your vehicle’s OBD Port. It is
typically located on the lower left
side of the driver’s side foot well.
2650-1914-77 2/22/17
Auto Meter Products, Inc. All Rights Reserved.
Turn vehicle ignition key to On,
or Start Engine. You will see the
Green PWR turn On.
On your mobile device, open the
Settings Menu and conrm your
Bluetooth is enabled.
Quick Start Guide
DashLink Gauge System
1 2 3 4
Go to http://www.autometer.com/media/manual/2650-1900.pdf for
the Full Owners Manual for the DashLink Gauge System.
Android
Apple
Page 2
Perform a Bluetooth Scan.
“AutoMeter DashLink” will
appear as an Available Device.
Select it and pair your device.
Android
Apple
Launch the DashLink App and
it will automatically detect and
connect to the DashLink dongle.
If it does not connect, tap the
Connect Button.
2650-1914-77 2/22/17
Auto Meter Products, Inc. All Rights Reserved.
Once connected, the Blue
Bluetooth Light will be
illuminated on the DashLink
Dongle and a green ring will
appear on the Connect Button
on the App.
The OBD Light and APP Light
will both blink, signifying a data
link is established between the
Dongle and the Mobile Device.
Explore the DashLink App for your
vehicles performance with AutoMeter
Gauges, Performance Dashboards
& more.
Quick Start Guide
DashLink Gauge System
5
6
7 8 9
Go to http://www.autometer.com/media/manual/2650-1900.pdf for
the Full Owners Manual for the DashLink Gauge System
Loading...