AutomationDirect LG5929 User Manual

1-800-633-0405

Dold LG5929 Extension Module

For the latest prices, please check AutomationDirect.com.

Additional contacts for emergency-stop modules and safety gate
monitors.

• 1-channel or 2-channel connection

• LED indication for operation

• Output: 5 N.O. and 1 N.C. contacts

Safety Relays Selection Chart

Part Number Price Marking Type Voltage Outputs

LG5929-60-100-61

$102.00 Safety relay extension module 24 VAC/VDC 5 N.O./1 N.C.

Safety Relay Extenson Module Specification Table

General Specifications

Temperature
Altitude

Vibration Resistance
Degree of Protection
Housing
Weight
Agency Approvals and Standards

Terminal Designation per EN 50 005 Wire Connections

Wire Fixing

Nominal Voltage

Voltage Range

Maximum Consumption
Nominal Frequency
Control Current
Overvoltage Protection

Electrical Contact Life
Mechanical Life

Contact Type
Operate/Release Time
Nominal Output Voltage
Thermal Current (I

th)

Short Circuit Strength

Switching Capacity IEC/EN 60 947-5-1

Switching Frequency

1x4 mm

Input Specifications

Output Specifications

Storage: -25°C to 85°C (-13°F to 185°F) Operating: -15°C to 55°C (5°F to 131°F)

2

solid or 1 x 2.5 mm2 stranded ferruled (isolated) or 2 x 1.5 mm2 stranded ferruled (isolated) DIN 46 228-1/-2/-3/-4

Plus-minus terminal screws M3.5 box terminals with wire protection or cage clamp terminals.

At 10% residual ripple: 0.9 to 1.1 U

5 N.O. positively driven and 1 N.C. relay contacts (N.O. contacts are safety contacts)

Max. 5A per contact. See continuous current limit curve in installation manual.

DC 13: N.O. contacts: 4A/24V; N.C. contacts: 4A/24VDC; N.O. contact: 8A/24V >25x103

Safety Data – Values per EN ISO 13849-1

Category 4 according to EN 954-1
Performance level PLe according to EN 13849-1
MTTF

d

DC

avg

Safety Data –
Values per IEC/EN 62061 /IEC/EN 61508

SIL CL
SIL
HFT (Hardware Failure Tolerance)
DC

avg
SFF
PFH

D

< 2,000 meters

Amplitude: 0.35mm, Frequency: 10 to 55 Hz (IEC/EN 60-068-2-6)

Per IEC/EN 60 529. Housing: IP40; Terminals IP20

UL 94V-0 Thermoplastic; Din mount 35 mm x 7.5 mm

205g (7.23 oz.)

CSA, cULus file E107778, CE, RoHS, TUV

or 2 x 2.5 mm2 solid per DIN 46 228-1/-2/-3 /-4

24V AC/DC

AC: 0.85 to 1.1 U

24VAC/DC: 1.8VA

50 to 60 Hz

Control current typ. at 24V over 2 relays: 75 mA

Internal VDR (Voltage Dependent Resistor)

To AC15 at 2 A,230V: 105 switching cycles IEC/EN 60 947-5-1

20 x 106 switching cycles

Operate typ at UN: 20 m.; Release typ at U

250VAC

Max fuse rating:10A gl (IEC/EN 60 9470-5-1); Line circuit breaker: B6A

AC 15: N.O. contacts: 3A/230V; N.C. contacts: 2A/230VAC

ON: 0.4s, OFF: 9.6s

Max. 1,200 switching cycles/hr

N

; At 48% residual ripple: 0.85 to 1.1 U

N

: 35 ms.

N

>100 years

99%

3 per IEC/EN 62061
3 per IEC/EN 61508
1

99%

99.7%

-1

4.68E-10 h

N

www.automationdirect.com

Safety Electrical Components

tESC-310

1-800-633-0405

Dold LG5929 Extension Module

For the latest prices, please check AutomationDirect.com.

Wiring

LG5929 Block Diagram

A1(+) A2(-)

A3(+) A4(-)

Applications

L1

24V

24V

Dimensions mm [in]

13 23 33 43 53 Y1

K1

K2

14 24 34 44 54 Y2

Emergency
Stop

A1(+)

A2(-)

S21S33 S34141424

S12S22 131323

S11

LG5925

..

..

On

Y1 Y2

N

A1(+) A3(+)

LG5929/100

A2(-) A4(-)

23 33 43

24 34 44

53

54

Contact multiplication with LG 5929/100

Note: This is a representative drawing. Depending on the LG5925 safety relay you
select, different voltage sources may be required.

www.automationdirect.com

*Note: When switching inductive loads, surge suppressors are recommended.

Safety Electrical Components

tESC-311