AutomationDirect GS20XA-DS User Manual

For the latest prices, please check AutomationDirect.com.

GS20(X) Optional Accessories – General

Disconnect Switch

The GS20XA-DSx series disconnect switch provides a local on/off
disconnect switch that is easily mounted to the GS20X drive. This
accessory provides an easy, quick, single hasp lockout point to
isolate power to the drive. For more information and installation
instructions, see the GS20(X) User Manual.

A

GS20X Disconnect Switch Selection

Frame

A GS20XA-DSA $96.00 154.5

B GS20XA-DSB $99.50

C GS20XA-DSC $165.50

Part

Number

Price

Dimensions (mm [in])

A B C D

145.0
[5.71]

165.0
[6.50]

145.2
[5.72]

152.5
[6.01]

[6.08]

164.5
[6.48]

2x Ø25.0

[Ø0.98]

2x Ø32.4

[Ø1.28]

C

B

3X Ø20.0

[Ø0.79]

D

EMC Shield Plate

EMC Shield Plates are available for use with shielded cable and your GS20 drive. For GS20X drives, please using Earthing Plates. Each
shield plate is compatible with all GS20 drives of that frame size. For more information and installation instructions, see the GS20(X)
User Manual.

GS20 EMC Shield Plate Selection

Frame

A GS20A-ESP-A $23.00
B GS20A-ESP-B $23.80
C GS20A-ESP-C $24.40
D GS20A-ESP-D $25.00
E GS20A-ESP-E $35.20
F GS20A-ESP-F $35.80

EMC Shield Plate

Model

Price

EMC Shield Plate Dimensions

Model

GS20A-ESP-A
GS20A-ESP-B
GS20A-ESP-C
GS20A-ESP-D
GS20A-ESP-E
GS20A-ESP-F

Dimensions mm [inch]

a b

69.3 [2.73] 80.0 [3.15]

67.7 [2.67] 79.7 [3.14]

78.0 [3.07] 91.0 [3.58]

103.4 [4.07] 97.0 [3.82]

124.3 [4.89] 77.4 [3.05]

168.0 [6.61] 80.0 [3.15]

b

a

Earthing Plate

Earthing plates are available for use with shielded cable and your GS20X drive. For GS20 drives, please use EMC shield plates. Each
earthing plate is compatible with all GS20X drives of that frame size. For more information and installation instructions, see the
GS20(X) User Manual.

Capactive Filter

The GS20A-CAPF capacitive filter supports basic filtering and
noise interference reduction for all GS20 and GS20X models
460V and below. For more information and installation instruc­tions, please see the GS20(X) User Manual.

The GS20A-CAPF cannot be used with 575V models.

tGSX-42

GS20X Earthing Plate Selection

Frame Earthing Plate Model Price

A GS20XA-EPA $36.40
B GS20XA-EPB $42.00
C GS20XA-EPC $42.60

GS20A-CAPF Specifications

Price

$19.15 110–480 VAC -40–85°C

Applicable

Voltage

AC Drives

Temperature

Range

Capacitance

Cx: 1uF ± 20%

Cy: 0.1uF ± 20%

4.5

[0.18]

4.5

[0.18]

Example Earthing Plate - GS20XA-EPA

26.6

[1.05]

77.5

[3.05]

350

[13.78]

43.5

[1.71]

4.0

[0.16]

86.5

[3.41]

35.5

[1.40]

40.5

[1.59]

1-800-633-0405

31.6

[1.24]

10

[0.39]

4.0

[0.16]

For the latest prices, please check AutomationDirect.com.

GS20(X) Optional Accessories – General

Replacement Keypad

The GS20A-KPD can be used to replace the keypad that comes
with each GS20 drive. The replacement keypad can be plugged
directly into the drive (no screws needed) or mounted remotely
using M3 screws and a keypad extension cable.

GS20-KPD Replacement Keypad

Price Part Screw Torque

$24.60

GS20A-KPD M3

8–9 kg·cm
(6.947.81 lb-in.)
[0.78–0.88 N·m]

Direct Mounting on Plate

Embedded Mounting in Plate

Keypad Extension Cables

The default GS20 keypad is removable and can be remote
installed if desired. Use one of the cables below to connect the
remotely installed keypad back to the GS20 drive.

GS20 Keypad Compatible Extension Cables

Price Cable

$30.50 GS-CBL2-1L 1 [3.28]
$41.00 GS-CBL2-3L 3 [9.84]
$47.00 GS-CBL2-5L 5 [16.4]

Length

(m [ft])

tGSX-43

AC Drives

1-800-633-0405