For the latest prices, please check AutomationDirect.com.
C-more Micro 6-inch TFT EA3 Touch Panel
Model EA3-T6CL C-more 6-inch Micro touch panel has a 5.7-inch TFT LCD 320 x
240 pixel display and a palette of 32K colors for customizing objects, screen backgrounds and displaying bitmap graphics. It features five user-defined function keys,
each key with a user-defined red LED indicator. The C-more 6-inch Micro TFT panels
are powered from a Class 2, 12-24 VDC power supply*. The panel is NEMA 4/4X
indoor when installed correctly.
* NOTE: Recommended DC power supply to power the C-more Micro Panel,
AutomationDirect Part No. PSL-24-010.
FunctionAvailable
Features
• Touch screen display
• Free downloadable programming software
• 320 x 240 pixel display with up to 40 lines
EthernetOptional (EA-ECOM)
USB Programming PortYes
Serial RJ12 PortYes
Serial DB15 PortYes
by 80 characters of text and graphics in
landscape mode
U
• Up to 40 characters of dynamic text with
embedded variables and phrases mixed
with graphics
• Five programmable function keys can
change with every screen. Can increment /
decrement values, trigger recipes, view
index of screens.
• 32K colors
• Optional replaceable clear screen overlay
• 6MB memory
*NOTE: The EA3-T6CL can be powered through the USB port when connected to a PC for programming, the screen brightness is diminished because the panel is running in Low-Power
Mode. For full brightness, connect an external Class 2, 12-24 VDC power source to the 6”
panel’s power connection. An external Class 2, 12-24 VDC power source must be used when
the panel is installed in its application.
Dimensions
Units: inches [mm]
• Supports Ethernet expansion module
(EA-ECOM)
• Built-in USB type B programming port
• Built-in 15-pin serial communications port
2.13
[54.1]
1.79
[45.4]
1.55
[39.4]
• Built-in RJ12 serial communications port
• Built-in Alarm Control setup that activates beep,
backlight flash, customized alarm
0.24
[6.0]
banner, and red LED blinking
• 0 to 50 °C (32 to 122 °F) operating
temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when
mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
4.77
5.33
[135.4]
Part No. EA3-T6CL
Shown in Landscape (Horizontal) mode
L
R
[159.9]
6.85
[174.0]
$319.00
(4) PLACES
GASKET
Panel Cutout
www.automationdirect.com
Panel Thickness
NOTE: The C-more 6-inch Micro cutout dimensions are not equivalent to previous AutomationDirect text panels. The C-more
6-inch Micro panels will not fit in cutouts for DV-1000, EZText,
Optimate panels or C-more 6-inch panels.
Operator Interface
tCMM-36
Page 2
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro 6-inch, 8-inch and 10-inch
EA3 Panel Specifications
EA3-T6CL, EA3-T8CL and EA3-T10CL Specifications
Part Number:EA3-T6CLEA3-T8CL
Description:
320 x 240 pixel LCD display
(Landscape mode),
Five user defined keypad function buttons with
five user defined LED indicators
800 x 600 pixel LCD display (Landscape mode),
Seven user defined keypad function buttons with
seven user defined LED indicators
Display:
• Type
• Resolution
• Color
• Display Brightness
(Reference)
• Viewing Area Size
• Active Area Size
• Contrast / Brightness
• Viewing Angle
(Landscape Mode)
5.7” TFT Graphical type
with LED Backlight
320 (W) x 240 (H) pixel (Landscape Mode)
240 (W) x 320 (H) pixel (Portrait Mode)
270 nits (typ)295 nits (typ)270 nits (typ)
4.57” (W) x 3.44” (H)
[116.2 mm x 87.4 mm]
4.54” (W) x 3.40” (H)
[115.2 mm x 86.4 mm]
Adjusted from the panel’s built-in configuration setup menu
3, 9 o’clock axis –> 80 degrees
6 o’clock axis –> 65 degrees
12 o’clock axis –> 80 degrees
8.4” TFT Graphical type
with LED Backlight
800 (W) x 600 (H) pixel (Landscape Mode)
600 (W) x 800 (H) pixel (Portrait Mode)
32768 colors
6.86” (W) x 5.17” (H)
[174.2 mm x 131.2 mm]
6.71” (W) x 5.03” (H)
[170.4 mm x 127.8 mm]
3, 9 o’clock axis –> 80 degrees
6 o’clock axis –> 60 degrees
12 o’clock axis –> 80 degrees
Backlight:
• Type
• Color
• User Replaceable
LED
White
No
Touch Screen:
•Type
• Operation
• Life
Analog resistive, single touch*
82 gram force [0.8 N] maximum
Minimum of 1,000,000 cycles
Features:
• User Memory
• Number of Screens
• Beep (Internal)
• Keypad Function Buttons
• Keypad Function Button
LEDs
• Programming Port
• Serial Communications
• Ethernet Communications
Five user defined function key buttons with the
ability to customize label with an overlay.
6MB30MB
Up to 999 – limited by project memory usage
Yes
Seven user defined function key buttons with the ability to
Minimum of 500,000 cycles
Each function key button includes a red LED that can be user programmed.
USB 2.0 Type B
RJ12 serial communications port (RS-232)
15-pin D-sub serial communications port (RS-232, RS-485 / 422).
10/100 Base-T (Automatic Negotiation) with EA-ECOM Module
*Note: The Touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an unexpected object may be acti-
vated.
C-more Micro EA3-T6CL, EA3-T8CL and EA3-T10CL panel specifications continued on next page.
For the latest prices, please check AutomationDirect.com.
C-more Micro EA3 Series
Power Connection Wiring
EA3-S3ML-RN and EA3-S3ML-R
• EA3-S3ML-RN and EA3-S3ML-R C-more Micro panels are powered during programming from the PC through the USB to
RS-232 Programming Cable Assembly, EA-MG-PGM-CBL.
• During operation, EA3-S3ML-RN and EA3-S3ML-R C-more Micro panels can be powered from most AutomationDirect PLC’s
RJ12 serial communications ports by using the DV-1000CBL communications cable.
To PLC
RJ12 Port
Power Supplied to Panel through Cable from AutomationDirect PLC RJ12 port
RS-232C (p/n DV-1000CBL)
To C-more
Micro-Graphic
Serial Port1
10 feet [3.0 m] Maximum
Wiring Diagram
1 = Sig GND
2 = +5 VDC
3 = RXD
4 = TXD
5 = not used
6 = Sig GND
RJ12 6-pin
Phone Plug
(6P6C)
1 2 3 4 5 6
GND
TXD
RXD
+5 V
GND
6
4
3
2
1
1
GND
3
RXD
4
TXD
5
+5 V
6
GND
RJ12 6-pin
Phone Plug
(6P6C)
1 2 3 4 5 6
1 = Sig GND
2 = not used
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
EA3-S3ML, EA3-T4CL, EA3-T6CL, EA3-T8CL and EA3-T10CL
EA3-S3ML, EA3-T4CL, EA3-T6CL, EA3-T8CL and EA3-T10CL C-more Micro EA3 series panels are powered by a Class 2, 2.5
Amp @ 12-24 VDC power source in normal operation.
Supply to Panel:
2.5A @ 12–24 VDC
Equipment
Ground
–
+
www.automationdirect.com
Operator Interface
tCMM-42
Page 6
RS-232/422/485
RS-232/422/485
RJ12 serial
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro EA3 Series PLC Connections
Cabling requirements
The table below decribes the EA3 series cabling options available for most AutomationDirect PLCs.
EA3 Series Cabling Options
Part Number
Port1 RJ12
(RS-232)
EA3-S3ML
EA3-S3ML-R
DV-1000CBL*
EA3-S3ML-RN
EA3-T4CL
EA3-T6CL
EA3-T8CL
EA3-T10CL
PLC List A
PLC List B
*Cable can provide +5VDC for panel power
**BX-P-SER2-RJ12 is required
• Allen-Bradley DF1 Full Duplex, Allen-Bradley DF1 Half Duplex,
Allen-Bradley PLC5 DF1, AB DH485, Allen-Bradley EtherNet/
IP (Client) SLC5/05, NET-ENI, MicroLogix 1100/1400*, Control/
CompactLogix (SLC mapping only)
• Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
• GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
• Mitsubishi Melsec FX
• Siemens PPI
• Entivity Modbus RTU (master only)
• AutomatiionDirect GS Drives
• AutomationDirect SOLO Temperature Controllers
• Mitsubishi Q/QnA
* Ethernet port is built in to EA3-S3ML and EA3-T4CL. EA3-T6CL, EA3-T8CL and
EA3-T10CL require the optional EA-ECOM module for Ethernet.
USB Type Micro-B
Programming Port
EA3-S3ML & EA3-T4CL
Programming /
Communications Port
Ethernet
communications Port2
Pin Signal
1Frame GND
TXD (232C)
2
RXD (232C)
3
Supplies +5VDC
4
5Logic GND
PLC 15-pin D-sub
serial communications Port2
Communication Ports
EA3-T6CL
RJ12 serial
-+
81
15
PLC 15-pin serial
PinSignalPin Signal
6LE
CTS (232C)
7
RTS (232C)
8
RXD+ (422/485)
9
10 RXD– (422/485)
communications Port1
9
11 TXD+ (422/485)
TXD– (422/485)
12
Term. Resistor
13
do not use
14
15 do not use
RS-232/422/485
EA3-T8CL & EA3-T10CL
Pin Signal
1 Frame GND
TXD (232C)
2
RXD (232C)
3
Supplies +5VDC
4
5 Logic GND
PinSignalPinSignal
6LE
7
8
9
10 RXD– (422/485)
Expansion
Connector
CTS (232C)
RTS (232C)
RXD+ (422/485)
Pin Signal
1Logic GND
not used
2
RXD (232C)
3
TXD (232C)
4
5Receives 5VDC
6Logic GND
RS-232
RJ12 serial
communications Port1
11 TXD+ (422/485)
TXD– (422/485)
12
Term. Resistor
13
do not use
14
15 do not use
USB Type B
Programming Port
6 5 4 3 2 1
Expansion
Connector
Pin Signal
1 Logic GND
2
3
4
5 Supplies +5VDC
6 Logic GND
RS-232
Programming Port
not used
RXD (232C)
TXD (232C)
6 5 4 3 2 1
USB Type B
81
9
15
PLC 15-pin serial
communications Port2
Pin Signal
1Frame GND
TXD (232C)
2
RXD (232C)
3
do not use
4
5 Logic GND
PinSignalPinSignal
6LE
CTS (232C)
7
RTS (232C)
8
RXD+ (422/485)
9
10 RXD– (422/485)
11 TXD+ (422/485)
TXD– (422/485)
12
Term. Resistor
13
do not use
14
15 do not use
communications Port1
www.automationdirect.com
Pin Signal
1TD +
2
3
4
RJ12 serial
Pin Signal
1 Logic GND
Power Detect*
2
RXD (232C)
3
TXD (232C)
4
5+5VDC in*
6 Logic GND
TD –
RD +
do not use
RS-232
PinSignal
6 do not use
RD –
7
N.C.
8
N.C.
9
6 5 4 3 2 1
* EA3-T4CL
not used
EA3-S3ML-RN & EA3-S3ML-R
communications Port1
PinSignal
1Logic GND
Power Detect*
2
RXD (232C)
3
TXD (232C)
4
5+5VDC in
6Logic GND
Operator Interface
6 5 4 3 2 1
RS-232
tCMM-43
Page 7
Green
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
Communication Expansion Module
EA-ECOM Ethernet Communication Module
The EA-ECOM communication module is compatible with EA3 series C-more Micro 6-inch, 8-inch and
10-inch panels and most C-more panels. It adds an Ethernet (RJ45) port for programming and PLC
communications at 10/100 Mbps. C-more Micro Software and firmware version 4.0 or later is required.
C-more Software and firmware version 6.50 or later is required.
Part No. EA-ECOM
$54.00
Ethernet Communication Interface Specifications
Standard Specification
Communication Speed
Cable Specification
Auto MDI / MDI-X
Connector Type
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of 1 octave/min. (±10%),
10 sweep cycles per axis on each of 3 mutually perpendicular axes
IEC60068-2-27 (Test Ea), 15 G peak, 11ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
To obtain the most current agency approval information,
see the Agency Approval Checklist section on the specific part number’s web page
0 to 50 °C (32 to 122 °F)
–20 to +60 °C (–4 to +140 °F)
5–95% RH (non-condensing)
For use in pollution degree 2 environment
NEMA ICS3-304
RFI, (145 MHz, 440 MHz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
EN55011 Class A (Radiated RF emission)
NEMA 250 type 4/4X indoor use only
UL50 type 4X indoor use only
IP-65 indoor use only
(When mounted correctly)
CE (EN61131-2), UL508, CUL Canadian C22.2
50 oz·in [0.35 N·m]
0.23 lb [105g]
Operator Interface
tCMM-44
Page 8
R
R
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro EA3 Panel Accessories
D-SUB 15-pin 90-degree Communication Port Adapter
The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of C-more Micro EA3 Series 3-inch*, 4-inch and 6-inch panels
to allow a controller communication cable to be plugged in at a 90 degree angle to reduce panel depth requirements. 15-pin straight
through pin-out. UL Recognized.
* EA3-S3ML-RN and EA3-S3ML-R are not equipped with a 15-pin serial port.
Part No.
EA-ADPTR-4
Dimensions
Units: inches [mm]
0.815
[20.7]
Date code
Country of Origin
1.605
[40.8]
1.873
[47.6]
0.793
[20.2]
KOYO ELECTRONICS INDUSTRIES CO., LTD.
EA-ADPTR-4
IOIOI – PLC
$42.50
0.856
[21.7]
D-SUB 15-pin to Terminal Block Adapter
The EA-COMCON-3 adapter plugs into the 15-pin serial port on the rear of C-more Micro EA3 Series 3-inch*, 4-inch and 6-inch panels
to allow wire terminal connections for an RS-422/RS-485/DH485 PLC communication cable. UL Recognized.
* EA3-S3ML-RN and EA3-S3ML-R are not equipped with a 15-pin serial port.
Part No.
EA-COMCON-3
$45.50
1.756
[44.6]
1.873
[47.6]
1.126
[28.6]
Terminals
GND
Dimensions
Units: inches [mm]
Date code
Country of Origin
KOYO ELECTRONICS INDUSTRIES CO., LTD.
EA-COMCON-3
GND
SD–
SD+
RD–
RD+
TERM
SD–
SD+
RD–
RD+
1.15
[29.2]
1.00
[25.4]
TERM
www.automationdirect.com
Operator Interface
tCMM-45
Page 9
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro EA3 Panel Accessories
Clear Screen Overlay
Optional clear screen overlay used to protect C-more Micro displays from minor scratches and wear. EA-MGCOV-CL contains 5 clear screen overlays. All other packages contain 3 clear screen overlays.
Part No. EA-MG-COV-CL
$38.50
Part No. EA-4-COV3
$36.50
Part No. EA-6-COV2
$40.50
Part No. EA-8-COV2
$43.50
Part No. EA-10-COV2
$49.00
B
Part Number
EA-MG-COV-CL
EA-4-COV3
EA-6-COV2
EA-8-COV2
EA-10-COV2
A
Dimensions - inch [mm]
AB
3.13
[79.4]
4.15
[105.5]
4.91
[124.8]
7.32
[185.8]
8.91
[226.2]
1.75
[44.4]
2.52
[64.0]
3.80
[96.4]
5.44
[138.2]
6.61
[168.0]
Dimensions
Units: inches [mm]
0.197
[5.0]
0.157
[4.0]
www.automationdirect.com
Operator Interface
tCMM-47
Page 10
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro 6-inch EA3 Panel
Replacement Parts
Replacement parts at a glance:
Part NumberDescriptionPrice
EA-MG-BZ2-BRK
EA-MG-DC-CON
Panel mounting brackets, replacement. Package of 8. For use with C-more Micro 4in and 6in panels, all 6in
bezels, and 3in bezel EA-MG-BZ2.
DC 3-terminal power connector, replacement. Package of 5. For use with all C-more Micro 4in, 6in, 8in and
10in panels, and power adapters EA-MG-P1 and EA-MG-SP1.
$20.00
$15.50
EA-MG6-S6ML-GSK
EA-MG6-S6ML-FKL
Panel mounting gasket, replacement. For use with C-more Micro 6in panels.
Function key label insert, replacement. Package of 5. For use with C-more Micro 6in panels. (3) blank labels
(1) portrait F1-F5 label (1) landscape F1-F5 label included.
Panel Mounting Clips
Part No. EA-MG-BZ2-BRK
(pk of 8)
Part No. EA-MG6-S6ML-GSK
Panel Gasket
DC Power Connector
Part No. EA-MG-DC-CON
(pk of 5)
$12.00
$19.50
Function Keys Label Inserts
Part No. EA-MG6-S6ML-FKL
(pk of 5; 3 blank, 1 F1-F5 for land-
scape, 1 F1-F5 for portrait)
www.automationdirect.com
Operator Interface
tCMM-49
Page 11
1-800-633-0405
C-more Micro Communication
Cables and Cable Kits
For the latest prices, please check AutomationDirect.com.
Cable
Description
Cable
Part Number
Cables for direct connect to panel’s serial Port1
(Panel powered from PLC’s serial port.)
Networking cable, RS-232 (RJ12 6P6C) to RS-232 (RJ12 6P6C),
shielded, 12ft cable length. For use with CLICK, DL05, D2-240, D4-450
and Productivity3000 PLCs.
DirectLOGIC DL06 connector, 15-pin D-sub HD15 male to RJ12 female.
For use with DL06 CPUs and DL205 D2-250, D2-250-1, D2-260 and
D2-262 CPUs.
DirectLOGIC universal cable kit, for use with all DirectLOGIC PLCs with
RS-232 ports.
Communication cable, 6-pin RJ12 to 6-pin RJ11, 2m/6.6ft cable length.
For use with any OP400 series OptiMate unit and a D3-340 CPU.
D0-CBL
FA-15HD
FA-CABKIT
OP-3CBL-1
Cables used with serial Port2
Communication cable, 15-pin male D-sub to 6-pin RJ12, shielded,
9.8ft/3m cable length. For use with C-more or C-more Micro panel and
AutomationDirect PLCs with RJ12 ports.
Communication cable, 15-pin male D-sub to 15-pin D-sub HD15 male,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and a DL06, D2-250(-1), D2-260 or D2-262 (bottom port) CPU.
Communication cable, 15-pin male D-sub to 4-pin RJ11, shielded,
3m/9.8ft cable length. For use with C-more or C-more Micro panel and
a D3-340 CPU top or bottom port.
Communication cable, 15-pin male D-sub to 15-pin male D-sub,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and a DL405 (top port) CPU.
Communication cable, 15-pin male D-sub to 25-pin male D-sub,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and a D2-DCM, D3-232-DCU, D3-350 (bottom port) or DL405
(bottom port) CPU.
Communication cable, 15-pin male D-sub to 8-pin male mini DIN,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and an Allen-Bradley Micrologix CPU.
Communication cable, 15-pin male D-sub to 9-pin female D-sub, shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro panel
and an Allen-Bradley SLC 5/03, 5/04 or 5/05 CPU with DF-1 port.
Communication cable, 15-pin male D-sub to 25-pin male D-sub,
3m/9.8ft cable length. For use with C-more or C-more Micro panel and
an Allen-Bradley PLC-5 CPU with a DF1 port.
Communication cable, 15-pin male D-sub to 6-pin RJ45, shielded,
3m/9.8ft cable length. For use with C-more or C-more Micro panel and
an Allen-Bradley SLC 5/01, 5/02 or 5/03 CPU with a DH485 port cable.
Communication cable, 15-pin male D-sub to 15-pin male D-sub,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
and GE Fanuc Series 90/30 or 90/70 serial port.
Communication cable, 15-pin male D-sub to 25-pin male D-sub,
3m/9.8ft cable length. For use with C-more or C-more Micro panel and
a Mitsubishi FX Series CPU.
Communication cable, 15-pin male D-sub to 8-pin male mini DIN,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and a Mitsubishi FX Series CPU.
Communication cable, 15-pin male D-sub to 25-pin male D-sub,
shielded, 3m/9.8ft cable length. For use with C-more or C-more Micro
panel and an Omron C200 or C500 CPU.
EA-2CBL
EA-2CBL-1
EA-3CBL
EA-4CBL-1
EA-4CBL-2
EA-MLOGIX-CBL
EA-SLC-232-CBL
EA-PLC5-232-CBL
EA-DH485-CBL
EA-90-30-CBL
EA-MITSU-CBL
EA-MITSU-CBL-1
EA-OMRON-CBL
EA3-T8CL and EA3-T10CL cannot be powered by a PLC and
cannot communicate with a PLC through the USB Programming Port.
Note: Adding the optional EA-ECOM module allows communication via an
Ethernet connection (EA3 series only).
Price
$38.00
$13.50
$49.00
$6.00
$21.50
$22.00
$21.50
$21.50
$22.50
$33.00
$21.50
$21.50
$21.00
$21.50
$21.50
$21.50
$21.50
OP-3CBL-1
EA-2CBL-1
EA-4CBL-1
EA-MLOGIX-CBL
EA-PLC5-232-CBL
D0-CBL
FA-15HD
FA-CABKIT
EA-2CBL
EA-3CBL
EA-4CBL-2
EA-SLC-232-CBL
EA-90-30-CBLEA-DH485-CBLEA-MITSU-CBL
www.automationdirect.com
EA-MITSU-CBL-1
EA-OMRON-CBL
Operator Interface
tCMM-51
Page 12
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Micro Programming Software
FREE software!
C-more Micro Programming Software can be downloaded at no charge or
a CD version may be purchased by ordering EA-MG-PGMSW. The software
requires a USB port or Ethernet connection* on your PC to connect to the C-more
Micro panel. Software Help Files are included in the download. This software
programs all the C-more Micro panels (does not program the C-more 6-inch
through 15-inch touch panels).
Note: This software is used to program C-more Micro panels
only.
Note: The Ethernet port is built in to EA3-S3ML and
EA3-T4CL. EA3-T6CL, EA3-T8CL and EA3-T10CL require the
optional EA-ECOM module for Ethernet.
C-more Micro Programming Software is
a spin-off of its powerful sibling C-more
Touch Panel. It offers very high end
features designed to reduce your configuration time. Simply drag and drop the
objects from the object list (right side of
screen) onto the screen construction
area. Then configure your PLC tags and
click on the objects you wish to use. Use
the built-in simulator to review your work
on your PC before ever downloading
your project! The time saving benefits of
the C-more Micro configuration software
could easily pay for the panel. Check out
www.CmoreMicro.com to download a free
version.
Thumbnail
project
preview
pane
Helps keep track of
multi-screen projects.
Part NumberPanel Software / Firmware Version Required
EA3-S3ML-RN
EA3-S3ML-R
EA3-S3ML
EA3-T4CL
EA3-T6CL3.6 or later
EA3-T8CL
EA3-T10CL
Built-in project simulator
• Runs your project on your PC
• Test all of your screens before downloading
• Time savings pays for the panel
• Simulate function keys and keypad bezel
4.30 or later
4.20 or later
3.5 or later
Built-in user object/
screen libraries
Save time by re-using your custom
objects and screens.
Scrolling
object
selection
window
Lets you find the
object you want
fast. Just drag
and drop it on
the screen.
PC requirements
Following are the minimum system requirements for running C-more Micro
Programming Software, EA-MG-PGMSW, on a PC:
• Windows® Operating System (See automationdirect.com for specific operating system
requirements.)
• 150 MB free hard-disk space
• CD-ROM or DVD drive for installing software from the CD, or internet access to download free programming software
• USB port to use with the correct Programming Cable Assembly for project transfer from the programming software to the panel
www.automationdirect.com
Scrolling help window
Gives you helpful information on each object
Operator Interface
tCMM-52
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.