1-800-633-0405
These models in the ProSense DPM1 series offers a simple, low
cost digital display of analog process and DC voltage signals.
The 4-digit red LED display is easily scaled into any engineering units from -1999 to 9999 with a selectable decimal
point location. Two point direct or reverse acting linear scaling
values can be entered manually or by introducing actual
sensed process values in Teach mode. The meter is powered
Model Description Weight (lbs) Price
DPM1-A-H
DPM1-A-L
For the latest prices, please check AutomationDirect.com.
Digital Panel Meters - DPM1
Series 1/32 DIN
from an external AC or DC power supply. The 1/32 DIN
housing takes up minimal panel space and the meter face has
an IP65 rating. Configuration parameters can be locked out
to prevent unauthorized or accidental changes to the meter’s
operation. ProSense digital panel meters are backed by a 3
year warranty.
Features:
• 48 x 24mm 1/32 DIN
• Simple menu driven pushbutton
configuration
• 10mm 4-digit (-1999 to 9999) red
LED display
• Selectable decimal point
• Process input (±10V, ±20mA,
±100mV)
DPM1 Series Panel Meters
ProSense digital panel meter, 1/32 DIN, 10mm 4-digit red LED, input current signal range(s) of +/20 mA, input voltage signal range(s) of +/- 200 VDC, +/- 20 VDC, +/- 10 VDC, +/- 100 mVDC, 85
to 265 VAC / 100 to 300 VDC operating voltage.
ProSense digital panel meter, 1/32 DIN, 10mm 4-digit red LED, input current signal range(s) of +/20 mA, input voltage signal range(s) of +/- 200 VDC, +/- 20 VDC, +/- 10 VDC, +/- 100 mVDC, 21
to 53 VAC / 10.5 to 70 VDC operating voltage.
• DC Voltage input (±200V, ±20V)
• AC or DC powered
• Display scaling or process teaching
modes
• Configuration for direct or reverse
acting linear processes
• Total configuration lock out
• 3 year warranty
0.2 $93.00
0.2 $93.00
YEAR
3
Technical Specifications
Input Voltage Current
Range
Resolution
Input Impedance
Accuracy
(@ 23ºC ±5ºC)
Power Supply and Fuses
Power Consumption
Conversion
Display
Environmental Conditions
Environmental Air
Agency Approvals
Volts 1MΩ
mV 100MΩ
mA 20Ω
Maximum error ±(0.1% of reading ÷3 digits)
Temperature coefficient 100 ppm/ºC
Warm-Up time 5 minutes
DPM1-A-H
DPM1-A-L
Technique Sigma-Delta
Resolution ±15 bits
Conversion rate 20 times per second
Range -1999 to 9999, selectable decimal point position
Type 4-digit 10mm (0.4”), red
Display refresh rate 4 times per second
Display/input overrange indication
Operating temperature -10ºC to +60ºC (14ºF to 140ºF)
Storage temperature -25ºC to +85ºC (-13ºF to 185ºF)
Relative humidity
(non-condensing)
Maximum altitude 2000m
Frontal protection degree IP65
±200V (fixed) ±20V (fixed) ±10V ±100mV ±20mA
0.1V 0.01V 1mV 0.1mV 0.01mA
(Recommended fusing, 0.1A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
(Recommended fusing, 0.5A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
No corrosive gases permitted
85-265VAC 50/60Hz or 100-300VDC
21-53VAC 50/60Hz or 10.5-70VDC
1.8W
0vE
<95% @ 40ºC (104ºF)
CE
www.automationdirect.com
Panel Meters
tPMC-5
1-800-633-0405
Wiring
For the latest prices, please check AutomationDirect.com.
Digital Panel Meters - DPM1
Series 1/32 DIN
CN1
1
2
CN2
1
2
3
4
5
AC Supply DC Supply
1 Neutral 1 -VDC
2 Line 2 +VDC
Terminals
Connector CN1 CN2
Wire cross section
Strip length 8 to 9mm 5 to 6mm
Manufacturer Wago 231-202/026-000 Wago 733-105
Cage clamp con-
nection
0.08 to 2.5mm² (28 to 12
AWG)
Insertion tool or screwdriver
with 0.5 mm x 3.0 mm blade
0.08 to 0.5mm² (28 to 20
AWG)
Insertion tool or screwdriver
with 0.3 mm x 1.8 mm blade
CN1 Terminals
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
CN1
CN2 Terminals
CN2
1 - IN (common)
2 +100mV DC
3 +20mA
4 +10/20VDC
5 +200VDC
Programming Keys
(Bottom View)
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
ENTER: Enters configuration and
validates data and parameters.
SHIFT: Selects mode or shifts blinking digit
in configuration.
UP: Increases value of blinking digit in
configuration.
Dimensions
mm [inches]
Dimensions
Panel Cutout
Case Material
Installation
48 x 24 x 95mm (1/32 DIN)
45 x 22mm (Max. panel thickness 7mm)
Polycarbonate UL 94 V-0
See our website www.AutomationDirect.com for complete Engineering drawings.
Insert
Scan or click the above QR code
to be taken to the DPM1-A-H
and DPM1-A-L Series Quick
Start Guide
www.automationdirect.com
Panel Meters
tPMC-6
1-800-633-0405
Type DPM1-A-LP Type DPM1-A-2R
Type DPM1-A-T
For the latest prices, please check AutomationDirect.com.
Digital Panel Meters DPM Series
Description
The ProSense DPM family of digital panel meters includes both 1/32
DIN and 1/8 DIN meter sizes with simple menu-driven pushbutton
configuration. A wide variety of input signals can be accepted for
process, temperature, load cell, voltage, current, pulse, frequency,
and other applications. Available output options include alarm
relays, analog signal retransmission, and sensor excitation voltage.
Backed by a 3-year warranty, ProSense digital panel meters offer
outstanding features and performance at an incredible price point.
Type DPM2LType DPM2
Type DPM3
Click on the thumbnail or go to
https://www.automationdirect.com/VID-PS-0007
for a short video on Digital Panel Meters
DPM Series Digital Panel Meters Process Input Selection Guide
Model Size Display Inputs Outputs Power Price
DPM1-A-LP
DPM1-A-H
DPM1-A-L
DPM1-T-H
DPM1-T-L
DPM1-A-2R-H
DPM1-A-2R-L
DPM1-A-A2R-H
DPM1-A-A2R-L
DPM2-AT-HL
DPM2L-AT-HL
DPM2-AT-2R-HL
DPM2L-AT-2R-HL
DPM3-AT-H
DPM3-AT-2R-H
DPM3-AT-4R-H
DPM3-AT-A-H
DPM3-AT-A2R-H
DPM3-AT-L
DPM3-AT-2R-L
DPM3-AT-4R-L
DPM3-AT-A-L
DPM3-AT-A2R-L
1/32 DIN
1/8 DIN
10mm, Red LED*, -1999 to 9999
Selectable decimal point
10mm, Red LED, -1999 to 9999
8mm, Red LED, -1999 to 9999
Selectable decimal point
DPM2: 14mm, Red LED, -9999 to 9999
DPM2L: 20mm, Red LED, -1999 to 9999
Selectable decimal point
14mm, Red, Green, Amber LED
-19999 to 39999
Selectable decimal point
4-20mA
±20mA, ±100mV
±10V, ±20V
±200V
RTD Pt100 (3-wire)
TC Type J, K, T or N
±20mA, ±100mV
±10V, ±60V
±20mA, ±10V
±200V, 100-100k Ohm
potentiometer,
1k-50k Ohm resistance,
RTD Pt100 (3-wire)
RTD Pt1000 (4-wire)
TC Type J, K, T or N
±20mA, ±10V
RTD Pt100 (3-wire)
TC Type J, K, T or N
Load Cell ±15mV, ±30mV,
±150mV
Potentiometer
None
2 Relays Form A
SPST Normally
Open
2 Relays Form A
SPST Normally
Open
4-20mA
None
2 Relays
Form C SPDT
None
2 Relays
Form C SPDT
4 Relays Form A
Normally Open
with shared
common
4-20mA $152.00
2 Relays
Form C SPDT
4-20mA
None
2 Relays
Form C SPDT
4 Relays Form A
Normally Open
with shared
common
4-20mA $152.00
2 Relays
Form C SPDT
4-20mA
Loop Powered $72.00
85-265 VAC, 50/60 Hz
100-300 VDC
21-53 VAC, 50/60 Hz
10.5-70 VDC
85-265 VAC, 50/60 Hz
100-300 VDC
21-53 VAC, 50/60 Hz
10.5-70 VDC
85-265 VAC, 50/60 Hz
100-300 VDC
21-53VAC 50/60 Hz
10.5-70VDC
85-265 VAC, 50/60 Hz
100-300 VDC
21-53 VAC, 50/60 Hz
10.5-70 VDC
20-265 VAC, 50/60 Hz
11-265 VDC
85-265 VAC, 50/60Hz
100-300 VDC
22-53 VAC, 50/60 Hz
10.5-70 VDC
$93.00
$93.00
$93.00
$93.00
$103.00
$103.00
$113.00
$113.00
$109.00
$117.00
$119.00
$127.00
$135.00
$152.00
$164.00
$169.00
$135.00
$152.00
$164.00
$169.00
* Illumination based on available loop current and will not be as bright as the powered Digital Panel Meters
www.automationdirect.com
Panel Meters
tPMC-1
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
Digital Panel Meters DPM Series
DPM Series Digital Panel Meters Electrical Input Selection Guide
Model Size Display Inputs Outputs Power Price
DPM1-E-H
DPM1-E-L
1/32 DIN
10mm, Red LED, -1999 to 9999
Selectable decimal point
100 / 600 VAC or VDC
1A / 5A AC or DC
None
85-265 VAC, 50/60 Hz
100-300 VDC
21-53 VAC, 50/60Hz
10.5-70 VDC
$93.00
$93.00
DPM2-E-HL
DPM2-E-2R-HL
DPM3-E-H
DPM3-E-A2R-H
DPM3-E-L
DPM3-E-A2R-L
1/8 DIN
14mm, Red LED, -9999 to 9999
14mm, Red, Green, Amber LED
-19999 to 19999
Selectable decimal point
600 / 200 / 20 VAC or VDC
1A / 5A / shunt 60mV / shunt
100mV AC or DC
600 / 200 / 20 / 2 VAC True
RMS or VDC
1A / 5A / shunt 50mV / shunt
60mV / shunt 100mV AC
True RMS or DC
None
2 Relays
Form C SPDT
None
2 Relays
Form C SPDT
4-20mA
None
2 Relays
Form C SPDT
4-20mA
20-265 VAC, 50/60 Hz
11-265 VDC
85-265 VAC
100-300 VDC
22-53 VAC
10.5-70 VDC
$109.00
$119.00
$150.00
$178.00
$150.00
$178.00
DPM Series Digital Panel Meters Pulse, Frequency Input Selection Guide
Model Size Display Inputs Outputs Power Price
DPM1-P-H
DPM1-P-L
DPM1-P-A2R-H
DPM1-P-A2R-L
1/32 DIN
10mm, Red LED, 0 to 9999
Selectable decimal point
8mm, Red LED, 0 to 9999
Selectable decimal point
7kHz (tachometer rpm or rate
modes)
9999Hz (frequency meter
mode)
12kHz (tachometer rpm or rate
modes)
9999Hz (frequency mode)
100Hz (duty/PWM mode)
None
2 Relays Form A
SPST Normally
Open
4-20mA
85-265 VAC
100-300 VDC
1-53 VAC
10.5-70 VDC
85-265 VAC
100-300 VDC
21-53 VAC
10.5-70 VDC
$93.00
$93.00
$113.00
$113.00
DPM2-P-HL
14mm, Red LED, 0 to 9999, 0 to 999999 Totalizer
DPM2-P-2R-HL
DPM3-P-H
1/8 DIN
DPM3-P-A2R-H
DPM3-P-L
14mm Red, Green, Amber LED
-99999 to 99999, -9999999 to 99999999 Totalizer
Programmable decimal point
DPM3-P-A2R-L
www.automationdirect.com
Selectable decimal point
7.5 kHz (counter mode)
25kHz (tachometer rpm or rate
modes)
19kHz (without totalizer)
9.9 kHz (with totalizer)
None
2 Relays
Form C SPDT
4-20mA
None
2 Relays
Form C SPDT
4-20mA
None
2 Relays
Form C SPDT
4-20mA
20-265 VAC
11-265 VDC
85-265 VAC
100-300 VDC
22-53 VAC
10.5-70 VDC
Panel Meters
$109.00
$119.00
$135.00
$169.00
$135.00
$169.00
tPMC-2
Loading...