Automation Direct ATLAS ATM1500, ATLAS ATM1900, ATLAS ATM1900T, ATLAS ATM1500T, ATLAS ATM1700 Quick Installation Manual
...
A
TM
3
1
2
B
F
C
A
E
D
U
L
C
US
R
TLAS
INDUSTRIAL FLAT PANEL PC MONITOR
QUICK INSTALLATION GUIDE
Atlas Industrial Monitor
N
:
OTE
S
EE THE HARDWARE USER’S GUIDE, ATM-USER,
INCLUDED ON THE SUPPLIED DOCUMENTATION & DRIVER CD FOR
ADDITIONAL DETAILS. THE USER’S GUIDE IS IN PDF FILE FORMAT AND
REQUIRES DOWNLOADING
AND VIEW.
1. Verify Contents of the Box:
• Atlas Flat Panel Monitor – (A “T” at the end of the part number
designates the touch screen option.)
• VGA video cable – 10’ length
• RS-232 Serial touch screen cable (touch screen models only) – 10’ length
• USB touch screen cable (touch screen models only) – 10’ length
• Mounting clips and screws (qty of 14)
1 - 8 0 0 - 6 3 3 - 0 4 0 5
• USB retention bracket and mounting screw (touch screen models only)
• Optional power plug protective cover
• Documentation and Driver CD
• This Quick Installation Guide
ADOBE’S FREE ACROBAT READER TO OPEN
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
Description:
The Atlas monitor is a high performance color TFT flat panel monitor
specifically designed for harsh industrial environments including Class
I Division 2, Class II Division 2 and Class III Hazardous Locations. The
Atlas monitor accepts standard analog VGA input or digital DVI input,
and can display all VESA video modes up to 1280 x 1024 at 75 Hz with
16 million colors. An optional 5-wire analog touch screen is available
that offers both RS-232 and USB interface capability. The monitor is
housed in a heavy duty steel chassis with a powder coated machined
aluminum bezel. The monitor is certified to NEMA 4/4X/12 standards,
is UL/CUL listed, meets CE requirements and is RoHS compliant.
Panel mounting is simplified using convenient mounting clips instead
of conventional studs. All monitors are shipped with a power input
wiring receptacle, 10’ VGA cable, 10’ RS-232 cable (touch panel
models only), 10’ USB Cable (touch panel models only), mounting
hardware, this Quick Installation Guide, and CD-ROM containing
Hardware User’s Guide (ATM-USER) and touch screen driver
software for Windows® operating systems.
Dimensions:
w w w . a u t o m a t i o n d i r e c t . c o m
Contents:
Mounting Clips
RS-232 Cable
& hex spacers
(“T” ver. only)
Atlas
Monitor
(qty. 14)
Documentation
& Driver CD
Packaging
Material
Quick
Installation
Guide
Model
ATM1500/ATM1500T
ATM1700/ATM1700T
ATM1900/ATM1900T
A B C D E F
12.80”
(325.1 mm)
14.48”
(367.8 mm)
15.70”
(398.8 mm)
15.80”
(401.3 mm)
17.14”
(435.4 mm)
18.66”
(474.0 mm)
2.65”
(67.3 mm)
2.85”
(72.4 mm)
2.95”
(74.9 mm)
3.95”
(100.3 mm)
5.00”
(127 mm)
6.00”
(152.4 mm)
1.17”
(29.8 mm)
1.32”
(33.5 mm)
1.50”
(38.1 mm)
2.40”
(61.0 mm)
2.60”
(66.0 mm)
2.70”
(68.6 mm)
Agency Approvals:
USB Cable
(“T” ver. only)
Flat Panel Monitor
1
VGA Video
Cable
Certifications & Standards
Name UL508
Atlas
E157382 E200031
ANSI/ISA
12.12.01-2012
CE
EN 55022-1: Class A,
EN 61000-3-2: Class A,
EN 61000-3-3,
EN 61000-6-2,
IEC 60950-1
2. Install Monitor through Enclosure Door or Wall
CUTOUT
A
B
CUT AWAY
V
IEW
MAXIMUM ALLOWABLE
PANEL THICKNESS
*
NOTE: USE ONE OR THE
OTHER, NOT BOTH.
TOUCH SCREEN
CABLES *
VIDEO CABLE *
D
ISPLAY POWER
WARNING
Touch Screen is still
a
ctive while display
power is off
• The monitor must be installed on a flat surface of a NEMA type 1, 4, 4X
r 12 enclosure.
o
• Use dimensions as shown in the diagram below to provide a
rectangular mounting cutout in an approved NEMA 4/12 enclosure’s
door or wall.
Mount the monitor through the enclosure cutout, install and tighten (14)
•
mounting clips to a torque of 8.0 inch-pounds as shown in the diagram
o the right.
t
Cutout Dimensions:
Mounting Clip Installation:
odel
M
TM1500/ATM1500T
A
TM1700/ATM1700T
A
TM1900/ATM1900T
A
A B
12.00”
304.8 mm)
(
13.70”
348.0 mm)
(
14.90”
(378.5 mm)
15.00”
381.0 mm)
(
16.35”
415.3 mm)
(
17.75”
(450.9 mm)
WARNING: An operating temperature of 0 to 50 °C (32 to 122 °F)
ambient termperature inside the enclosure needs to be maintained
for proper operation of the monitor.
Warning: Suitable for use in Class 1, Division 2 Groups A, B, C,
and D; Class 2 Division 2 Groups F and G, Class III hazardous
locations, or nonhazardous locations only.
3. Connect DVI or VGA Video Cable between Monitor & PC
• Connect the included 10’ VGA video cable from the video connector on
the monitor to the video output connector on the host PC being used
with the monitor or use a digital DVI cable (sold separately).
• If using a DVI cable, input selection must be changed to DVI by pushing
1 - 8 0 0 - 6 3 3 - 0 4 0 5
the UP button on the rear of the monitor.
N
:
OTE
THE 15” MONITOR WILL PRODUCE THE BEST IMAGE QUALITY IF
THE
PC IS SET FOR A 1024 X 768 PIXELS @ EITHER 60, 70 OR 75 HZ.
VIDEO MODE.
RNING
WA
: Damage can occur by applying excessive torque to the
mounting clips.
Cable Connections:
w w w . a u t o m a t i o n d i r e c t . c o m
N
:
OTE
THE 17” AND 19” MONITORS WILL PRODUCE THE BEST IMAGE
QUALITY IF THE PC IS SET FOR A 1280 X 1024 PIXELS @ EITHER 60,
OR 75 HZ. VIDEO MODE.
4. Connect USB or Serial Cable between Monitor & PC
• Applies to touch screen version only.
• Use either the included 10’ RS-232 Serial touch screen cable or the 10’
USB touch screen cable from the appropriate connector on the monitor
to the appropriate connector on the host computer; do not connect
both.
• If using the USB cable, secure the cable using the included USB
retention bracket and screw; consult the Hardware User’s Guide,
ATM-USER, on the supplied Documentation and Driver CD for details.
N
OTE
OF THE USB RETENTION BRACKET IS REQUIRED FOR HAZARDOUS LOCA-
TIONS AND HIGHLY RECOMMENDED FOR NONHAZARDOUS LOCATIONS.
:
WHEN USING THE USB TOUCHSCREEN CONNECTION, THE USE
2
WARNING - EXPLOSION HAZARD - Do not connect or disconnect the
USB ports unless the power has been switched off or the area is
known to be non-hazardous.
AVERTISSEMENT - RISQUE D'EXPLOSION - Ne pas brancher ou débrancher
le ports USB á moins que l'alimentation á été coupée ou si la zone
n'est pas hazardeuse.
ADVERTENCIA - PELIGRO DE EXPLOSIÓN - No conecte o desconecte los
puertos USB a menos que la computadora se encuentre apagada o
el área se considere no peligrosa.
WARNUNG - EXPLOSIONSGEFAHR - USB-Ports nur anschließen oder
trennen, wenn keine spannung anliegt oder der Bereich nicht
explosiongefährdet ist.
N
:
OTE
TO PREVENT INADVERTANT DISCONNECTION OF VIDEO AND / OR
SERIAL TOUCHSCREEN CABLES ASSURE THAT THE THUMBSCREWS ARE
SUFFICIENTLY TIGHT.
Loading...