Automated Equipment GDF28 User Manual
GDF28 FULLY-AUTOMATED FRY DISPENSER
You can count on reduced labor costs and increased savings
when you “hire” the GDF28 Fully-Automated
Fry/Appetizer Dispenser. The equipment can perform nearly
all cooking preparation with minimal intervention, allowing
you to re-assign employees to more value-added tasks.
Dispenser Benefits:
Reduces manual fry preparation labor
Improves fry yields by minimizing raw fry
waste and fry breakage during basketing
Consistently produces more than 200
baskets per hour to handle rush periods
All electric operation
Eliminates the need for other manual
fry preparation equipment
Agency compliant: UL/cUL, CE, NSF
Watch your profits increase when
you put the GDF28 Fully-Automated
Fry Dispenser to work.
Only 28 inches/69 centimeters wide
42 lbs./19 kg. Hopper Capacity
Automated Equipment LLC
5140 Moundview Drive
Red Wing, MN 55066 USA
800-309-1053 US/Canada Sales
651-385-2270 International Sales
651-385-2166 Fax
www.autoequipllc.com
FIRST IN FRY DISPENSING
System Features:
• All 16 gauge, 304 stainless steel construction of body.
• Translucent, food-grade plastic hopper.
• Hopper capacity of 42 lbs./19 kg.
• Dual optical sensors provide automated dispensing operation.
• Precision electronic scale fills baskets with three portion
control weights to select from:
.75lb / 0,35 kg
1.0 lb / 0,45 kg
1.5lb / 0,7 kg
• Selector switch settings are completely programmable:
• Weight, in ounces or kilograms
• Automatic or manual basket filling
• Agency compliant: UL, cUL, CE and NSF.
• Automatically stages basket loads of frozen fry products for cooking.
• Operator's Panel contains On/Off power switch, Basket Load
Selector switch, and Start/Reset push button switch.
• Lift saddle assembly is electrically driven.
• Self-diagnostic error display codes allow for easy troubleshooting
and maintenance.
• Heavy duty swivel, locking casters.
• Stainless steel basket stop gate.
• Stainless steel removable drip tray with side splash panel.
• Unit disassembles for easy daily cleaning.
• Ten custom fryer baskets with red vinyl-coated handles.*
* Must use Custom Fryer Baskets with runners on the bottom
Note:
All food should be handled and stored according to industry standards. The GDF28 Fry Dispenser is not intended to be used for food
storage. It is recommended to clean the Dispenser regularly as
described in the manual in order to avoid spoilage or contamination.
OVERVIEW & FEATURES
Product Description and Overview:
The GDF28 is fully automated for high capacity dispensing of
frozen fry products to provide a more consistent, high quality product. The hopper can hold up to 42 pounds/19 kilograms of various
frozen fry cuts or appetizers.
Empty baskets placed on the gravity-operated upper guide travel
toward the accumulator doors. A rotating drum inside the hopper
transfers frozen fries onto an electronic scale until the desired basket load is achieved. The portion controlled fry load is dispensed
into an empty basket and transferred to the lower guide by a lift.
Filled baskets are staged on the lower guide in preparation for
cooking. After cooking, return empty baskets to the upper guide to
repeat the cycle.
Operation of the GDF28 Fry Dispenser is easily controlled by an
on-off power switch, a basket load select switch and an illuminated
reset button – all located on the operator panel. A slow flashing
light (located within the reset button) alerts the crew that the fry
hopper is empty. A rapid flashing light signals that a system error
has occurred.
Loading...