Active & Passive Safety Technology
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications made to this equipment not expressly approved by ZF TRW AUTOCRUISE
may void the FCC authorization to operate this equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.
Class B digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Autocruise SAS
GERMAINE Sylvain
RF customer interface and Homologation Engineer
Email: sylvain.germaine@trw.com
Tel: +33 (0)2 98 48 98 28
February 1, 2016
USER MANUAL
ZF TRW AUTOCRUISE being a supplier for the automotive industry, this device is sold to the auto
manufacturer and not to the general public. The device will be mounted behind the auto bumper.
The following text is intended to be added in the final customer user manual.
AUTOCRUISE S.A.S S.A.S. au capital de 1 000 000€ Siège social : Avenue du Technopôle / Pointe du Diable 29280 PLOUZANE France
SIRET 380 295 451 000 47 Code APE 2651 A Tél : +33 (0) 2.98.45.43.68 www.autocruise.com
Filiale de ZF TRW ZF TRW Headquarters: Friedrichshafen – Trade register of the municipal court of Ulm HRB 630206 www.zf.com
Loading...