Authinx XC14A Users manual

XCam III Motion Controlled Indoor/Outdoor Color Camera

™

● Built-in motion detector.

● Built-in 2.4 GHz Video Sender.

● Powered from a plug-in power supply (included).

● Use it outdoors to monitor your front door, back yard, etc.

● Use it indoors to monitor a child’s bedroom, etc.

The XX14A includes the XC14A camera and XM13A power supply. The XC14A is a very small and compact color
video camera with built-in 2.4 GHz Video Sender. You can attach it to a wall anywhere you want to monitor. The
XC14A transmits video and sound to the VR31A 2.4 GHz receiver (sold separately) which is connected to y our TV
located anywhere in your home (up to 100 ft. away). The built-in motion detector turns the camera on only when
there is motion, to conserve power. The motion detector also sends a wireless signal to an X10 transceiver which can
then turn on an X10 remote chime, etc.

1. Refer to the setup and operating instructions that came
with the 2.4 GHz V ideo Receiver, Model VR31A (sold
separately) to set up the Receiver.

2. Mount the camera in a suitable location with the antenna
on top so the camera is the right way up. If you install
it outdoors, run the small cable adapter through a hole
in the wall so you can plug the power supply into an
AC outlet indoors.

3. Plug the camera’s power jack into the adapter cable
on the power supply.

4. Set the Housecode and Unit Code. (See instructions
included with X10 remote controls).

5. Plug power supply into any 120V AC outlet.

6. Set the channel switch on the camera to the same setting
as the one on the VR31A Video Receiver.

7. Adjust the antenna on the camera if necessary to aim
it in the direction of the VR31A Receiver that you have
connected to your TV or monitor.

8. Adjust angle of motion detector for best coverage.

(with built-in 2.4 GHz transmitter)

Model XX14A

Set channel switch to

6

match setting on the
VR31A Receiver .

XC14A

Adjust antenna.

7

8

2

Attach the
to a wall.

Outdoors

Indoors

X10 Wireless Technology, Inc., Limited One Year Warranty

X10 Wireless Technology, Inc. (X10) warrants X10 products to be
free from defective material and workmanship for a period of one (1)
year from the original date of purchase at retail. X10 agrees to repair
or replace, at it’s sole discretion, a defective X10 product if returned
to X10 within the warranty period and with proof of purchase. If
service is required under this warranty:

1. Call 1-800-675-3044 or e-mail [e-mail] for details on

how to return your unit(s).

2. Enclose a check for $4.00 to cover postage and handling.

3. Enclose a dated proof of purchase.

4. X10 is not responsible for shipping damage.

Units to be returned should be packed carefully.
Please visit www.x10.com/warranty
to complete your on-line warranty registration.

F .C.C. CAUTION - THIS DEVICE COMPLIES WITH P ART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO
CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

1-800-675-3044 [e-mail]

4

3

Set the code used to
turn on an off from
X10 remote controls.

5

Plug into
any AC
outlet

XM13A

XC14A-02/01