FCC CAUTION
INTRODUCTION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
NOTE: Modifications to this product will void the user’s authority to
operate this equipment.
Your Wireless Audio/Video Sender system consists of a Sender unit which
you connect to your satellite receiver, DVD player, etc., and a Receiver
unit that you connect to a TV anywhere in your home. The Audio/Video
Sender converts the A/V signal from your A/V product into a 2.4 GHz
wireless Radio Frequency (RF) signal and transmits it (even through walls)
to the Audio/Video Receiver unit. The Audio/Video Receiver converts the
signal back to an A/V signal and passes it through a cable to your TV’s
COAX input, or A/V input jacks.
The Audio/Video Sender system also includes an IR Extender feature. This
lets you remotely control the A/V product that the Sender is connected to,
from the location where the Receiver is located. For example, you can
control a DVD Player in your living room, while watching it on a TV in
your bedroom.
There are just a few simple steps to follow to hook up your Audio/Video
Sender system to a satellite receiver, VCR, DVD Player, or Cable Box.
CONTENTS
INTRODUCTION ........................................................................3
ONTROLS AND CONNECTIONS.................................................. 4
C
ENDER ............................................................................4
S
ECEIVER .......................................................................... 5
R
ONNECTING UP .....................................................................6
C
OOKING UP THE SENDER ....................................................6
H
OOKING UP THE RECEIVER ................................................. 8
H
INE TUNING YOUR SYSTEM .................................................... 10
F
XTENDER FEATURE ......................................................... 11
IR E
22
2
22
33
3
33
CONTROLS AND CONNECTIONS
Audio/Video ReceiverAudio/Video Sender
RF Antenna
(for use with the IR
Extender feature)
Power Supply
Jack
2.4 GHz
Antenna
2.4 GHz
Channel Switch
IR Extender Jack
A/V In Jacks
RF Antenna
(for use with the IR
Extender feature)
2.4 GHz Channel
Switch (underneath
2.4 GHz Antenna).
CHANNEL
COAX out
A/V Out Jacks
Power Supply
Jack
ON-OFF
Switch
(on side)
CHANNEL
ONOFF
ON-OFF
Switch
ONOFF
34
TV CHANNEL
(on side)
Channel 3/4
switch
44
4
44
55
5
55