Australian Monitor. SY400V, SY800V Brochure

SynergySeries

100V Line Models – Serious 100V Line Power

The Australian Monitor Synergy Series SY400V and SY800V offer contractors

a host of practical features and deliver large amounts of power in a space

saving high performance package. The SY400V and SY800V are ideally suited

to today’s complex multi-zone 100v line systems.

SY400V -2 x 200w at 100V Line

SY800V -2 x 375w at 100V Line

SynergySeries

Specifications

SY400V

Output power per channel into 200W per channel
100v line (max load 50 ohms) (both channels driven)

Bridge mode Not available

Frequency Response 50Hz-30kHz +/-3dB

Distortion <0.5%

Input Sensitivity 1Vrms

Voltage Gain 100

Signal to Noise 97dB

Input Impedance 20kohm

Input clipping +20dBV

Cooling Front to Back

Amplifier Indicators Power, Status(Signal/Clip),

Overload, Thermal, Fault

Amplifier Controls Level per channel, Ground Lift

Amplifier Protection Current Limiting, DC Protection,

mains fuse, DC rail fuses, Slow
Start, Thermal Cutout

Net weight 16kg

Shipping weight 18kg

Net Dimensions 87x482x400 HxWxD mm

Shipping dimensions 210x540x520 HxWxD mm

Features include

• Custom designed, 2RU heavy duty steel chassis.

• Symmetrical layout - even weight distribution.

• High current power supply.

• High efficiency toroidal mains transformer.

• Binding post outputs

• Dual Channel Operation

• Balanced inputs and buffered attenuators.

• 1 Watt output indication (2.828 volts).

• 1 dB below output clip indication.

• Efficient front to back cooling.

• Dual, twin speed axial fans.

• Multi-role output fault indication.

• Front carry handles.

• Rear rack mount ears.

• Signal ground lift switch.

• Built in limiter circuit.

• High-quality, close-tolerance components

The Syner

gy Series also feature
many levels of protection to
ensure a reliable and trouble-free
installation.

SY800V

Output power per channel into 375W per channel
100v line (max load 25 ohms) (both channels driven)

Bridge mode Not available

equency Response

Fr

Distortion <0.5%

Input Sensitivity

Voltage Gain 100

Signal to Noise 97dB

Input Impedance 20kohm

Input clipping

Cooling

Amplifier Indicators

Amplifier Controls Level per channel, Ground Lift

Amplifier Pr

Net weight

Shipping weight 22kg

Net Dimensions 87x482x400 HxWxD mm

Shipping dimensions 210x540x520 HxWxD mm

otection

50Hz-30kHz

ms

r

1V

+20dBV

ont to Back

Fr

Power
Overload, Thermal, Fault

Current Limiting, DC Protection,
mains fuse, DC rail fuses, Slow
Start, Thermal Cutout

20kg

+/-3dB

, Status(Signal/Clip),

• Suppression of inrush current at mains turn-on.

• Input muting at turn-on.

• Input overvoltage protection.

• Radio-frequency interference suppression.

t-circuit protection and indication.

• Shor

• High overload mains fuse.

• Internal, independent DC supply rail fuses.

Engineered and Distributed by

Audio Telex Communications Pty Ltd

ABN 78 001 345 482

149 Beaconsfield Street,

water, Sydney NSW 2128, Australia

Silver

NSW Tel [phone] Fax [phone]
VIC Tel [phone] Fax [phone]

el

T

QLD
SA
WA Tel [phone] Fax [phone]
NZ

International Enquiries

inter

Website

www

[phone] Fax [phone]

Tel

[phone] Fax [phone]

el

T

[phone] Fax [phone]

[e-mail]

.australianmonitor.com.au