Australian monitor 480PAMIS BROCHURE

AMIS480P

Multi-Channel Power Amplifi er 4 x 80w

At a Glance...

The AMIS480P is a significant advance in 4 channel amp design offered at a contractor friendly price.

It features:

> 4 x 80 watts @ 4ohm, 70 volt, 100 volt. > 230/240 VAC or 24 VDC operation
> 2 RU chassis > Ground lift switches per channel
> Bi colour status LED per channel > Balanced XLR line inputs
> Thermal fault LED > Input link through switching
> 2 x dual speed fans

A More Thorough Examination...

The Australian Monitor Installation Series AMIS480P is a robust, highly featured 4 channel booster amplifi er.

Offering 4 independent channels each delivering 80
watts into 4 ohms or 70/100 volt line, the AMIS480P
is designed to operate in extreme conditions to give
the contractor the most reliable 4 channel amplifi er
available today.

Engineered with maximum attention to channel
isolation, with individual ground lift switches and
level control for each channel the AMIS480P will
operate as 4 individual amplifi ers in a rack space
friendly 2RU chassis.

For ease of installation each channel input can be
routed to the next channel via the rear panel link
switches, eliminating the need for daisy chaining
or Y-split cables. The AMIS480P also offers signal
present and clip LED indicators for each channel as
well as a thermal protect indicator.

The AMIS480P is the perfect partner four many of
Australian Monitor’s zone solution products like
DigiPage and DigiPage Jnr.

4 x 80w

Multi-Channel Power Amplifi er

Offering 4 independent channels, each delivering 80 watts into 4 ohms or 70/100 volt line, at
two rack units high. Feature individual ground lift switches and level control for each channel.

Each channel input routed to the next channel via rear panel link switches.

Indication of clip and signal present visible via the front panel.

Architecture & Engineering Specifi cations

OUTPUT POWER 4 x 80W

(1% THD, all channels driven)

FREQUENCY RESPONSE (1W) 80Hz - 20kHz
POWER BANDWIDTH (-3dB) 85Hz - 20kHz
THD (1kHz, -3dB) Less than 0.5%
S/N RATIO 94dB (ref 100V)
CROSSTALK 1kHz (80dB)

INPUT SENSITIVITY 20Hz - 20kHz (Better than 60dB)
INPUT IMPEDANCE 0.775V RMS (0dBu)
VOLTAGE GAIN 20K

(pot at max)

70V out 90 (39dB)

4. out 23 (27dB)

OUTPUT REGULATION (1kHz) 95%
DIMENSIONS 88mm x 483mm x 432mm

(h x w x d)

WEIGHT 20kg (44lb)
SHIPPING DIMENSIONS 230mm x 540mm x 550mm

(h x w x d)

SHIPPING WEIGHT 24kg (53lb)

Engineered and Distributed by AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsfi eld Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: [phone] Fax: [phone] VIC Tel: [phone] Fax: [phone] QLD Tel: [phone] Fax: [phone] WA Tel: [phone] Fax: [phone]

SA Tel: [phone] Fax: [phone] NZ Tel: [phone] Fax: [phone] International Enquiries - [e-mail] www.australianmonitor.com.au

100V out 129 (42dB)

(4.36” x 19” x 17”)

(9.1” x 21.3” x 21.7”)