AUSTLEN ENTOURAGE User Manual

Page 1
ENTOURAGE
TM
RAIN COVER
User Manual
austlen.com
Page 2
2
WARNING
• NEVER LEAVE CHILD UNATTENDED!
• Avoid risk of overheating and suocation: DO NOT use rain cover indoors or in hot weather.
• ENSURE all vents remain unobstructed.
• Adult supervision is required at all times when this product is in use.
• Canopy must be attached and extended when using rain cover.
• NEVER allow child to play with this product.
• ALWAYS hold stroller with rain cover securely in high winds, as it may become unstable.
• Do not use when infant car seats are in use.
• Dispose of plastic bags and packaging immediately to avoid danger of suocation.
• Intended for use only with AustlenTM EntourageTM strollers.
READ THIS USER MANUAL CAREFULLY AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. YOUR CHILD’S SAFETY MAY BE AT RISK IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
KEEP THESE INSTRUCTIONS AND WARNINGS FOR FUTURE REFERENCE.
DO NOT allow anyone to use this product unless that person has read and fully understood the warnings and instructions in this user manual prior to use.
Parts List
Product Care
Rain cover may be wiped down with water and a mild detergent that does not leave a residue, as needed. Do not use abrasives when cleaning.
Seat Cover With Securing Straps
Rear Panel Extension
Panel
Page 3
3
Attach Seat Cover
1
1
Rain Cover Installation
Put seat cover over seat, aligning the tented area with the seat canopy.
Pull lower part of cover down around footrest.
Attach Rear Panel2
Pull rear of seat cover back to cover hubs for handlebar adjustment buttons.
NOTE: Rear panel is for use only when stroller is retracted. Use extension panel when stroller is expanded.
Take rear panel, narrowest side at the top, and align with rear of seat cover, fastening on three sides. The bottom of the panel will remain open.
Attach Securing Straps3
Attach front and rear straps around frame as shown to secure rain cover to stroller.
Correctly installed rain cover.
Page 4
4
Attach Extension Panel
1
4
Fully expand stroller (see EntourageTM User Manual for instructions). Align extension panel so that two longer sides drape down sides of stroller and shorter side is at rear of stroller.
STEP 1: Fasten panel to itself just above handlebar button hubs and down along rear left and right sides.
STEP 2: Fasten across top and down front sides. Refasten rear straps to lower frame.
Correctly installed fully expanded rain cover is shown above.
NOTE: Extension panel is for use only when stroller is fully expanded. Use rear panel when stroller is fully retracted. Rear panel must be removed prior to attaching extension panel. CAUTION: Before expanding stroller, you must unfasten rear straps from around lower frame to avoid tearing.
Use With Secondary Seating
1
5
Correctly installed rain cover with second seat.
NOTE: Extension panel must be used when using rain cover with secondary seating.
Correctly installed rain cover with Sit+Stand.
Page 5
5
Model SA-RNPR-BK Manual P7550 version 1.0
All rights reserved. © 2016 AustlenTM Baby Co. Austlen, Entourage, and all associated logos are trademarks. All product specifications are correct at time of print. Austlen Baby Co. reserves the right to alter parts that will not aect product functionality.
AustlenTM Baby Co. P.O. Box 49589 Austin, TX 78765
844.AUSTLEN [email protected] austlen.com
SUPPORT & CONTACT INFORMATION
Loading...