User Manual
Options : - BNC + S-Video - DVI - Touchscreen
- Audio - Quad Display - DC power
Widescreen LCD Display
Wide 19", 22" screen size
Widescreen LCD Drawer
Models
RP-W119
Widescreen LCD Display
Models
RP-W822
RP-W719
4:3 LCD Drawer
Models
- For standard
RP-115 / RP-117 / RP-119 / RP-120
- For SUN Solaris
SP-117 / SP-119 / SP-120
- For Short depth version
RP-1415 / RP-1417 / RP-1419
4:3 LCD Display
Models
RP-615 / RP-717 / RP-819 / RP-920
SP-717 / SP-819 / SP-920
4:3 LCD Display
15", 17", 19", 20" screen size
Chapter 1 Getting Started
1.1
Important Safeguards.........................................................1
1.2
Regulatory Notice...............................................................2
1.3
Before Installation...............................................................3
1.4
Unpacking...........................................................................3
1.5
Optional Accessories..........................................................3
1.6
Peripheral Products............................................................4
Part 1 Widescreen LCD Display
Chapter 2 RP-W719 & RP-W822
2.1
Package Contents...............................................................5
2.2
Structure Diagram...............................................................6
2.3
Installation.......................................................................7-8
2.4
Connection.........................................................................9
Chapter 3 RP-W119
3.1
Package Contents.............................................................10
3.2
Structure Diagram.............................................................11
3.3
How to Use the Slides......................................................12
3.4
Connection.......................................................................13
Chapter 4 Operation
4.1
On-screen Display Operation............................................14
4.2
On-screen Menu...............................................................15
Chapter 5 Optional Specifi cation
5.1
DVI-D Option.....................................................................16
5.2
BNC + S-Video Option.......................................................17
5.3
Audio Option.....................................................................18
5.4
Touchscreen Options...................................................19-20
5.5
Front NEMA / IP65 Option ................................................21
5.6
Quad Display Option.........................................................22
5.7
DC Power Options............................................................23
Contents
Part 2 4:3 LCD Display
Chapter 6 RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
6.1
Package Contents............................................................24
6.2
Structure Diagram............................................................25
6.3
Installation...................................................................26-27
6.4
Connection.......................................................................28
Chapter 7 RP-120
SP-120
RP-115, RP-117 & RP-119
SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
7.1
Package Contents.............................................................29
7.2
Structure Diagram.............................................................30
7.3
How to Use the Slides......................................................31
7.4
Connection.......................................................................32
Chapter 8 Operation
8.1
On-screen Display Operation............................................33
8.2
On-screen Menu...............................................................34
Chapter 9 Optional Specifi cation
9.1
DVI-D Option.....................................................................35
9.2
BNC + S-Video Option.......................................................36
9.3
Audio Option................................................................37-38
9.4
Touchscreen Options...................................................39-40
9.5
Front NEMA / IP65 Option.................................................41
9.6
Quad Display Option.........................................................42
9.7
DC Power Options............................................................43
Chapter 10 LCD Specifi cation..................................................44-46
Chapter 11 Troubleshooting..........................................................47
Chapter 12 Dimensions.................................................................48-49
1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi -
cation, or failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
P. 2
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned envi-
ronment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■ When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equip
ment and invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1.2 Regulatory Notice Chapter 1
1.5 Optional Accessories
■
It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment.
■ The surface for placing and fi xing the Rackmount LCD Drawer / Display should be stable and level or mounted into a
suitable cabinet.
■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■ Convenience for connecting the Rackmount LCD Drawer / Display to the related facilities should be well considers
too.
The Rackmount LCD Drawer / Display comes with the standard parts shown on the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.4 Unpacking
1.3 Before Installation Chapter 1
P. 3
1. Power Cord
1.1 IEC power cord
1.2 NEMA 5-15 power cord (US)
1.3 BS 1363 power cord (UK)
1.4 CEE 7/4 power cord (German)
1.5 AS 3112 power cord (Australia)
P. 4
1.6 Peripheral Products Chapter 1
Item Model No. Description
Matrix Cat6 KVM
MU-1602 / MU-1603 / MU-1604
MU-IP1613 / MU-IP1614 / MU-IP1624
MU-3202 / MU-3203 / MU-3204
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
Matrix DB-15 KVM
M-802 / M-803 / M-804
M-IP813 / M-IP814 / M-IP824
M-1602 / M-1603 / M-1604
M-IP1613 / M-IP1614 / M-IP1624
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
Combo Cat6 KVM
U-801 / U-802 / U-IP802
U-1601 / U-1602 / U-IP1602
U-3201 / U-3202 / U-IP3202
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
Combo DB-15 KVM
CV-S801 / CV-802 / IP-802
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
PS/2 DB-15 KVM CV-401 / CV-801 / CV-1601 4 / 8 / 16 port PS/2 DB-15 KVM
Keyboard Drawer
RK-1
RK-2
Rackmount keyboard drawer (with KVM options)
Rackmount keyboard drawer (short depth version)
2.1 Package Contents Chapter 2
P. 5
Rackmount LCD display x 1 pc
6' VGA cable (male to male) x 1 pc
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter x 1 pc
5
4
2
1
3
U
s
e
r
M
a
n
u
a
l
1
5
4
3
2
RP-W719 & RP-W822
2.2 Structure Diagram Chapter 2
LCD interchangeable module kit
LCD membrane
Power adapter bracket
1
1
3
2
Front view Rear view
3
2
Power adapter
Power cord
RP-W719 & RP-W822
P. 6
P. 7
2.3 Installation Chapter 2
■ Install each screws shown in Figure 1.
Figure 1.
Figure 2.
■ Fixed the LCD into the rack.
* M6 screws is not provided.
RP-W719
P. 8
2.3 Installation Chapter 2
■ Install each screws shown in Figure 3.
* M6 screws is not provided.
Figure 3.
Figure 5.
■ Push the lower part of the LCD into the rack.
RP-W822
■ Insert the upper part of the LCD display to the rack shown
in Figure 4.
Figure 4.
Figure 6.
■ Installation completed.
1
43
2
P. 9
2.4 Connection Chapter 2
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power.The company is not responsible for damage caused in this
way.
DB-15 VGA female connector Power input
RP-W719 & RP-W822
3.1 Package Contents Chapter 3
P.10
1
4
U
s
e
r
M
a
n
u
a
l
32
RP-W119
LCD drawer x 1 pc
6’ VGA cable (male to male) x 1 pc
User manual x 1 pc
Power cord x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 8 pcs
M6 washer x 8 pcs
5
4
2
6
1
3
7
5
6
7
8
8
LCD interchangeable module kit
“One Man” Installation Slide
LCD membrane
1
1
2
2
3
Carry handle to release the 2-pt lock
2-point lock
3
3.2 Structure Diagram Chapter 3
RP-W119
4
5
4
5
P. 11
P.12
3.3 How to Use the Slides Chapter 3
Figure 7.
■ A black arrow release button is located on the
outside of each slide. (shown in Figure 7).
Figure 8.
■ Pull and hold the black arrow button on either
side of the LCD drawer to unlock.
(shown in Figure 8).
Figure 9.
■ Push the LCD drawer into the rack. (shown in
Figure 9).
Caution : Keep your fi ngers away from the
slide stop
L
I
L
I
RP-W119
P.13
3.4 Connection Chapter 3
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power.The company is not responsible for damage caused in this
way.
VGAPower
RP-W119
4.1 On-screen Display Operation Chapter 4
Exit the OSD screen
Shortcut key to auto adjustment by pressed the button for 5 seconds or
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
LCD membrane
RP-W719 & RP-W822
LCD membrane
P.14
RP-W119
P.15
4.2 On-screen Menu Chapter 4
RP-W719, RP-W822 & RP-W119
OSD Confi guration Page
Image:
To enter into the brighness, contrast, color temp, red, green, and
blue
Geometry:
To enter into the auto adjust, H position, V position, phase and
clock
Video:
Audio:
To enter into volume, mute and power save
Misc:
To enter into the language, OSD position, graphic mode, OSD time,
ratio and reset
Brightness
Contrast
Red 255
Green
Blue
Image
Color Temp
50
User
1024 x 768 59.8Hz
Select: Adjust: Exit:Set:
M
50
255
255
P.16
5.1 DVI-D Option Chapter 5
DVI-D
Remarks
■ Package includes 1 x 6ft DVI-D cable
VGA
RP-W719 & RP-W822
RP-W119
DVI-DVGA Power
5.2 BNC + S-Video Option Chapter 5
Remarks
■ Package includes 1 x 6ft S-Video cable
VGAS-Video BNC
VGA PowerS-Video BNC
P.17
RP-W719 & RP-W822
RP-W119
5.3 Audio Option Chapter 5
VGA
Remarks:
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
Audio
Speaker
Power
P.18
RP-W719 & RP-W822
RP-W119
Speaker
P.19
5.4 Touchscreen Options Chapter 5
USB VGAPower
Serial VGAPower
USB interface
Serial interface
USBVGA Power
SerialVGA Power
USB interface
Serial interface
RP-W719 & RP-W822
RP-W119
5.4 Touchscreen Options Chapter 5
P.20
Model -W19TRB / -W19TRS -W22TRB / -W22TRS
Screen size W 19" W 22"
Interface USB / serial
Optical transmittance 80% ± 3%
Surface hardness ≥3H (JIS K5400)
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model -W19TCB / -W19TCS -W22TCB / -W22TCS
Screen size W 19" W 22"
Interface USB / serial
Optical transmittance 93% ± 2%
Surface hardness >9H Surface hardness, withstand over 300 million touches
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Resistive
Remarks
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
■ Touchscreen in other brands are available on request
5.5 Front NEMA 4 / IP65 Option Chapter 5
P.21
Rear case
LCD panel
4mm protective glass (Front NEMA 4 / IP65 protection)
Aluminum front panel
1
1
3
2
3
2
4
4
Remarks
■ 4mm thickness of protective glass is not toughened one, please handle it carefully.
RP-W719 & RP-W822
5.6 Quad Display Option Chapter 5
Item Description
Model Number QD (NTSC) QD (PAL)
Number of Color 16.7 M 16.7 M
Imaging System NTSC PAL
Resolution 1024 x 525 1024 x 625
Refresh Rate 60 50
Video Input
Camera Input
1.0 Vpp, 75 Ohm x 4
VCR Input
1.0 Vpp, 75 Ohm x 1
Video Output
Live Monitor
1.0 Vpp, 75 Ohm x 1
Loop Through Out
1.0 Vpp, 75 Ohm x 4
VCR Output
1.0 Vpp, 75 Ohm x 1
Auto Gain Control Yes
Time / Date Yes
On Screen Display Yes
Camera Title 8 Character Title
Display Format
2 x Zoom On
Playback
Yes
QUAD Yes
FULL
Yes
SEQUENCY
Yes
Dwell Time 0 to 99 Sec Adjustable
Built-in Buzzer Yes
Key Lock Yes
P.22
Specifi cations
Remarks
■ For more details, please refer to Quad Display User Manual.
RS-232
Alarm I/O
VCR in
VCR out
AV BNC VGA Power
Video IN
1 ~ 4
Video Loop
1 ~ 4
P.23
5.7 DC Power Options Chapter 5
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Effi ciency 84% 85% 85%
Remarks
■ Package does not include power cord and AC power adapter
VGADC Power input
VGA DC Power input
RP-W719 & RP-W822
RP-W119
6.1 Package Contents Chapter 6
P.24
Rackmount LCD display x 1 pc
6' VGA cable (male to male) x 1 pc
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter x 1 pc
5
4
2
1
3
U
s
e
r
M
a
n
u
a
l
1
5
4
3
2
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
6.2 Structure Diagram Chapter 6
P.25
For 15" LCD
LCD interchangeable module kit
LCD membrane
Power adapter bracket
1
1
3
2
Front view Rear view
3
2
Power adapter
Power cord
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
P.26
6.3 Installation Chapter 6
■ Install each screws shown in Figure 10.
Figure 10.
Figure 11.
■ Fixed the LCD into the rack.
* M6 screws is not provided.
RP-615, RP-717 & RP-819
SP-717 & SP-819
P.27
6.3 Installation Chapter 6
■ Install each screws shown in Figure 12.
Figure 12.
Figure 13.
■ Fixed the LCD into the rack.
* M6 screws is not provided.
RP-920 & SP-920
P.28
6.4 Connection Chapter 6
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power.The company is not responsible for damage caused in this
way.
DB-15 VGA female connector Power input
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
7.1 Package Contents Chapter 7
P.29
1
4
U
s
e
r
M
a
n
u
a
l
3
2
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
LCD drawer x 1 pc
6’ VGA cable (male to male) x 1 pc
User manual x 1 pc
Auto switch power adapter ( for external power version) x 1 pc
Power cord x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 8 pcs
M6 washer x 8 pcs
5
4
2
6
1
3
7
6
7
8
9
8
5
9
LCD interchangeable module kit
“One Man” Installation Slide
LCD membrane
1
1
2
2
3
Carry handle to release the 2-pt lock
2-point lock
3
7.2 Structure Diagram Chapter 7
4
5
4
5
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
P.30
P.31
7.3 How to Use the Slides Chapter 7
Figure 14.
■ A black arrow release button is located on the
outside of each slide. (shown in Figure 14).
Figure 15.
■ Pull and hold the black arrow button on either
side of the LCD keyboard drawer to unlock.
(shown in Figure 15).
Figure 16.
■ Push the LCD drawer into the rack. (shown in
Figure 16).
Caution : Keep your fi ngers away from the
slide stop
L
I
L
I
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
P.32
7.4 Connection Chapter 7
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power.The company is not responsible for damage caused in this
way.
VGAPower
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
External power version ( For short depth version - RP-1415 / 1417 / 1419 )
Internal power version
8.1 On-screen Display Operation Chapter 8
Exit the OSD screen
Shortcut key to auto adjustment by pressed the button for 5 seconds or
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
P.33
15" LCD membrane
17", 19" & 20" LCD membrane
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
P.34
8.2 On-screen Menu Chapter 8
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
OSD Confi guration Page
Image:
To enter into the brighness, contrast, color temp, red, green, and
blue
Geometry:
To enter into the auto adjust, H position, V position, phase and
clock
Video:
Audio:
To enter into volume, mute and power save
Misc:
To enter into the language, OSD position, graphic mode, OSD time,
ratio and reset
Brightness
Contrast
Red 255
Green
Blue
Image
Color Temp
50
User
1024 x 768 59.8Hz
Select: Adjust: Exit:Set:
M
50
255
255
P.35
9.1 DVI-D Option Chapter 9
DVI-D
Remarks
■ Package includes with 1 x 6ft DVI-D cable
■ The depth of RP-1415 / 1417 / 1419 will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )
VGA
Internal power version
External power version ( For short depth version - RP-1415 / 1417 / 1419 )
DVI-D
Remarks
■ Package includes with 1 x 6ft DVI-D cable
VGA Power
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
P.36
9.2 BNC + S-Video Option Chapter 9
Remarks
■ Package includes 1 x 6ft S-Video cable
VGAS-Video BNC
Internal power version
External power version ( For short depth version - RP-1415 / 1417 / 1419 )
VGA PowerS-Video BNC
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
RP-615, RP-717, RP-819 & RP-920
VGA
Remarks
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
Audio
Speaker
Power
9.3 Audio Option Chapter 9
P.37
RP-615, RP-717, RP-819 & RP-920
9.3 Audio Option Chapter 9
VGA
Internal power version
External power version ( For short depth version - RP-1415 / 1417 / 1419 )
Remarks:
■ Audio input is 35mm audio plug
■ The speaker is sharing the same power with LCD.
Audio
Speaker
Power
P.38
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
P.39
9.4 Touchscreen Options Chapter 9
USB VGAPower
Serial VGAPower
USB interface
Serial interface
Internal power version
External power version
Internal power version
External power version
( For short depth version - RP-1415 / 1417 / 1419 )
( For short depth version - RP-1415 / 1417 / 1419 )
USBVGA Power
SerialVGA Power
USB interface
Serial interface
RP-120
RP-115, RP-117 & RP-119
RP-1415, RP-1417 & RP-1419
RP-615, RP-717, RP-819 & RP-920
9.4 Touchscreen Options Chapter 9
P.40
Model -15TRB / -15TRS -17TRB / -17TRS -19TRB / -19TRS -20TRB / -20TRS
Screen size 15" 17" 19" 20"
Interface USB / serial
Optical transmittance 82% ± 5%
Surface hardness ≥3H (JIS K5400)
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model -15TCB / -15TCS -17TCB / -17TCS -19TCB / -19TCS -20TCB / -20TCS
Screen size 15" 17" 19" 22"
Interface USB / serial
Optical transmittance 93% ± 2%
Surface hardness >9H Surface hardness, withstand over 300 million touches
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Resistive
Remarks
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
■ Touchscreen in other brands are available on request
9.5 Front NEMA 4 / IP65 Option Chapter 9
P.41
Rear case
LCD panel
4mm protective glass (Front NEMA 4 / IP65 protection)
Aluminum front panel
1
1
3
2
3
2
4
4
Remarks
■ 4mm thickness of protective glass is not toughened one, please handle it carefully.
RP-615, RP-717, RP-819 & RP-920
9.6 Quad Display Option Chapter 9
Item Description
Model Number QD (NTSC) QD (PAL)
Number of Color 16.7 M 16.7 M
Imaging System NTSC PAL
Resolution 1024 x 525 1024 x 625
Refresh Rate 60 50
Video Input
Camera Input
1.0 Vpp, 75 Ohm x 4
VCR Input
1.0 Vpp, 75 Ohm x 1
Video Output
Live Monitor
1.0 Vpp, 75 Ohm x 1
Loop Through Out
1.0 Vpp, 75 Ohm x 4
VCR Output
1.0 Vpp, 75 Ohm x 1
Auto Gain Control Yes
Time / Date Yes
On Screen Display Yes
Camera Title 8 Character Title
Display Format
2 x Zoom On
Playback
Yes
QUAD Yes
FULL
Yes
SEQUENCY
Yes
Dwell Time 0 to 99 Sec Adjustable
Built-in Buzzer Yes
Key Lock Yes
P.42
Specifi cations
RS-232
Alarm I/O
VCR in
VCR out
AV BNC VGA Power
Video IN
1 ~ 4
Video Loop
1 ~ 4
Remarks
■ For more details, please refer to Quad Display User Manual.
■ Quad display input is not applicable for SP series.
P.43
9.7 DC Power Options Chapter 9
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Effi ciency 84% 85% 85%
Remarks
■ Package does not include power cord and AC power adapter
■ The depth of RP-1415 / 1417 / 1419 will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )
VGADC Power input
VGA DC Power input
RP-120 & SP-120
RP-115, RP-117, RP-119, SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
10.1 LCD Specifi cations Chapter 10
RP-W719, RP-W822 & RP-W119
Item Description
LCD Manufacturer
Diagonal Size Wide 19" TFT Wide 22" TFT
Max. Resolution 1440 x 990 1680 x 1050
Brightness (cd/m²) 300 300
Color Support 16.7 M 16.7 M
Contrast Ratio (typ.) 1000:1 1000:1
Viewing Angle (H/V) 160˚ x 160˚ 170˚ x 160˚
Display Area (mm) 408 x 255 474 x 296
Tr Response Time (ms) 1.3 3.6
LCD Panel MTBF (hrs) 50,000 50,000
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. Type Separate H/V, Composite, SOG
Resolution
720 x 400, 70 Hz
640 x 480, 60/ 72/ 75 Hz 640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
1152 x 864, 60/ 70/ 75 Hz
1280 x 720, 60/ 70/ 75 Hz 1280 x 720, 60/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz 1280 x 1024, 60/ 75 Hz
1440 x 900, 60 Hz 1680 x 1050, 60 Hz
Plug & Play DDC EDID 1.3
Connector DB-15 connector
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 48 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Options
Graphic Input DVI-D, BNC, S-Video & Quad display input
DC Power DC power input with 12V, 24V, 48V selection
Touchscreen Resistive & capacitive
AU 35mm audio plug
NEMA 4 / IP65 4mm thickness of protective glass
Environmental
Operation 0˚ to 50˚C Degree
Storage -5˚ to 60˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
P.44
Item Description
LCD Manufacturer
Diagonal Size 15" TFT 17" TFT 19" TFT
20" TFT
Max. Resolution 1024 x 768 1280 x 1024 1280 x 1024
1600 x 1200
Brightness (cd/m²) 250 300 300
300
Color Support 16.2 M 16.7 M 16.7 M
16.7 M
Contrast Ratio (typ.) 700:1 1000:1 1000:1
800:1
Viewing Angle (H/V) 150˚ x 135˚ 160˚ x 160˚ 160˚ x 160˚
160˚ x 160˚
Display Area (mm) 304 x 228 338 x 270 376 x 301
408 x 306
Tr Response Time (ms) 2 1.3 1.3
1
LCD Panel MTBF (hrs) 50,000 50,000 50,000
50,000
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. Type Separate H/V, Composite, SOG
Resolution
640 x 400, 70 Hz -
720 x 400, 70 Hz
640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 72/ 75 Hz 1024 x 768, 60/ 70/ 75 Hz
- 1152 x 864, 60/ 70/ 75 Hz
- 1280 x 720, 60/ 70/ 75 Hz 1280 x 720, 60/ 75 Hz
- 1280 x 1024, 60/ 70/ 72/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
-
1400 x 1050, 60 Hz
-
1600 x 1200, 60 Hz
Plug & Play DDC EDID 1.3
Connector DB-15 connector
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 48 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval FCC, CE
Options
Graphic Input DVI-D, BNC, S-Video & Quad display input
DC Power DC power input with 12V, 24V, 48V selection
Touchscreen Resistive & capacitive
AU 35mm audio plug
NEMA 4 / IP65 4mm thickness of protective glass
Environmental
Operation 0˚ to 50˚C Degree
Storage -5˚ to 60˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
P.45
10.1 LCD Specifi cations Chapter 10
RP-120 RP-115, RP-117, RP-119
RP-1415, RP-1417 & RP-1419 RP-615, RP-717, RP-819 & RP-920
P.46
10.1 LCD Specifi cations Chapter 10
Item Description
Form Factor 1U rack mounting on slide-out rails
Diagonal Size 17" TFT 19" TFT 20" TFT
Resolution
1152 x 900 (Direct) 1152 x 900 (Direct) 1152 x 900 (Direct)
1280 x 1024 (Native) 1280 x 1024 (Native) 1600 x 1200 (Native)
Brightness (cd/m²) 300 300 300
Color Support 16.7 M 16.7 M 16.7 M
Contrast Ratio (typ.) 1000:1 1000:1 800:1
Viewing Angle (H/V) 160˚ x 160˚ 160˚ x 160˚ 160˚ x 160˚
Display Area (mm) 338 x 270 376 x 301 408 x 306
Tr Response Time (ms) 1.3 1.3 1
LCD Panel MTBF (hrs) 50,000 50,000 50,000
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. Type Separate H/V, Composite, SOG
Resolution
720 x 400, 70 Hz
640 x 480, 60 /70 /72 /75 Hz
800 x 600, 60 /70 /72 /75 Hz
1024 x 768, 60 /70 /75 Hz
1152 x 864, 60 /70 /75 Hz
1152 x 900, 66 /76 Hz
1280 x 720, 60 /75 Hz
1280 x 1024, 60 /70 /75 Hz 1280 x 1024, 60 /75 Hz
- 1400 x 1050, 60 Hz
- 1600 x 1200, 60 Hz
Plug & Play DDC EDID 1.3
Connector DB-15 connector
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 48 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval FCC, CE
Options
Graphic Input DVI-D input
DC Power DC power input with 12V, 24V, 48V selection
Environmental
Operation 0˚ to 50˚C Degree
Storage -5˚ to 60˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
SP-120 SP-117 & SP-119
SP-717, SP-819 & SP-920
1. How do I adjust the resolution?
11.1 Troubleshooting Chapter 11
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
2. Is interference signal appeared on LCD normal when shutting down the computer ?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered
normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.
3. The membrane power light is not ON
Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
Check the power cord is properly connected to the LCD keyboard drawer and power outlet.
4. Screen image is not centered or sized properly
Press the button for two seconds to automatically adjust the image.
Adjust the H-position and V-position settings via On-screen menu.
For SP series LCD Drawer
2. How do I adjust the resolution in MS Windows operation system?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
6. Is the LCD drawer hot-pluggable ?
The LCD drawer is hot-pluggable, but components of connected devices, such as the servers and KVMs, may not be
hot-pluggable. We suggest turning off the power to all devices before connecting them. Apply power to connected devices
again only after the LCD receives power.
1. How can I adjust the monitor resolution to 1152 x 900 for SUN Micro system ?
The S solution LCD drawer will automatically detect the 1152 x 900 resolution, so no user confi guration should be neces-
sary.
P.47
12.1 Dimensions Chapter 12
P.48
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross
Weight
RP-W719
480 x 57.5 mm
18.9 x 2.3"
7U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
RP-W822
500.4 x 59.1 mm
19.7 x 2.3"
8U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
RP-W119
445 x 650 x 44 mm
17.5 x 25.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
RP-615 series
480 x 52 mm
18.9 x 2"
6U
565 x 406 x 156 mm
22.2 x 16 x 6.1"
6 kg
13 lb
8 kg
18 lb
RP-717 series
480 x 57 mm
18.9 x 2.2"
7U
565 x 450 x 156 mm
22.2 x 17.7 x 6.1"
7 kg
15 lb
8.5 kg
19 lb
RP-819 series
480 x 57 mm
18.9 x 2.2"
8U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
RP-920 series
480 x 67 mm
18.9 x 2.6"
9U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
SP-717 series
480 x 57 mm
18.9 x 2.2"
7U
565 x 450 x 156 mm
22.2 x 17.7 x 6.1"
7 kg
15 lb
8.5 kg
19 lb
SP-819 series
480 x 57 mm
18.9 x 2.2"
8U
565 x 495 x 156 mm
22.2 x 19.5 x 6.1"
8 kg
18 lb
10 kg
22 lb
SP-920 series
480 x 67 mm
18.9 x 2.6"
9U
565 x 539 x 156 mm
22.2 x 21.2 x 6.1"
12 kg
26 lb
15 kg
33 lb
RP-W719, RP-W822 & RP-W119
RP-615, RP-717, RP-819 & RP-920
SP-717, SP-819 & SP-920
CV-RP-W33-0109V1
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross
Weight
RP-120 series
442 x 650 x 44.2 mm
17.4 x 25.6 x 1.74"
589 x 856 x 168 mm
23.2 x 33.7 x 6.8"
14 kg
31 lb
19 kg
42 lb
SP-120 series
442 x 650 x 44.2 mm
17.4 x 25.6 x 1.74"
589 x 856 x 168 mm
23.2 x 33.7 x 6.8"
14 kg
31 lb
19 kg
42 lb
RP115 series
442 x 550 x 44.2 mm
17.4 x 21.6 x 1.74"
581 x 705 x 175 mm
22.9 x 27.8 x 6.9"
10 kg
22 lb
15 kg
33 lb
RP-117 series
446 x 600 x 44.2 mm
17.6 x 23.6 x 1.74"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
12 kg
26 lb
17 kg
37 lb
RP-119 series
446 x 600 x 44.2 mm
17.6 x 23.6 x 1.74"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
SP-117 series
446 x 600 x 44.2 mm
17.6 x 23.6 x 1.74"
581 x 705 x 175 mm
22.9 x 27.8 x 6.9"
12 kg
26 lb
17 kg
37 lb
SP-119 series
442 x 600 x 44 mm
17.4 x 23.6 x 1.73"
581 x 755 x 172 mm
22.9 x 29.7 x 6.8"
13 kg
29 lb
18 kg
40 lb
RP-1415 series
442 x 440 x 44 mm
17.4 x 17.3 x 1.73"
584 x 601 x 169 mm
23 x 23.7 x 6.7"
10 kg
22 lb
15 kg
33 lb
RP-1417 series
446 x 480 x 44 mm
17.6 x 18.9 x 1.73"
584 x 641 x 169 mm
23 x 25.2 x 6.7"
12 kg
26 lb
17 kg
37 lb
RP-1419 series
446 x 480 x 44 mm
17.6 x 18.9 x 1.73"
584 x 641 x 169 mm
23 x 25.2 x 6.7"
13 kg
29 lb
18 kg
40 lb
12.1 Dimensions Chapter 12
P.49
RP-120
SP-120
RP-115, RP-117, RP-119
SP-117 & SP-119
RP-1415, RP-1417 & RP-1419
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which
may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2008 Austin Hughes Electronics Ltd. All rights reserved.
Loading...