Austin Hughes UltraView DP-17, UltraView OP-17, UltraView AP-17, UltraView NAP-17 User Manual

Options : - AV / BNC

- Touchscreen

- DC power

- DVI

- Audio in

OP-17 Open frame LCD panel

AP-17 Front aluminum LCD panel

DP-17 Stylish front aluminum cover LCD panel

NAP-17 Front NEMA4 / IP 65 LCD panel

Innovative LCD Display

User Manual 17" LCD

Contents

Chapter 1 Getting Started

1.1

Important Safeguards........................................................1

1.2

Before Installation..............................................................2

1.3

Unpacking........................................................................2

1.4

Optional Accessories........................................................2

Chapter 2 AP-17 Front aluminum LCD panel

2.1

Package Contents.............................................................3

2.2

Structure Diagram.........................................................................4

2.3

Dimension Diagram......................................................................5

2.4

Mounting Method......................................................................6-7

Chapter 3 NAP-17 Front NEMA4 / IP 65 LCD panel

3.1

Package Contents.............................................................8

3.2

Structure Diagram.........................................................................9

3.3

Dimension Diagram....................................................................10

3.4

Mounting Method..................................................................11-12

Chapter 4 DP-17 Stylish front aluminum cover LCD panel

4.1

Package Contents...........................................................13

4.2

Structure Diagram.......................................................................14

4.3

Dimension Diagram....................................................................15

4.4

Mounting Method........................................................................16

Chapter 5 OP-17 Open frame LCD panel

5.1

Package Contents...........................................................17

5.2

Structure Diagram.......................................................................18

5.3

Dimension Diagram....................................................................19

5.4

Mounting Method........................................................................20

Chapter 6 Connection...................................................................21

Chapter 7 Operation

7.1

On-screen Display Operation........................................21

7.2

On-screen Menu............................................................22

Chapter 8 LCD Specifi cation...................................................23

Chapter 9 AV, BNC, DVI Options

9.1

DVI-D Option..................................................................24

9.2

S-Video + RCA Input Option..........................................24

9.3

S-Video + BNC Input Option..........................................24

9.4

On-screen Menu for DVI, BNC, S-Video & RCA Input..25

Chapter 10 Touchscreen Options

10.1

Touchscreen Quick User Guidelines.........................26-27

Chapter 11 DC Power Options..................................................28

Chapter 12 Troubleshooting.......................................................29

Chapter 13 Dimensions..................................................................30

Chapter 14 Cleaning the LCD display................................31

Blank page

1.1 Important Safeguards Chapter 1

P. 1

Please read all of these instructions carefully before you use the device. Save this manual for future
reference.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modifi ed or removed.

■ Damage, deterioration or malfunction resulting from:

□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi -
cation, or failure to follow instructions supplied with the product.

□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

1.4 Optional Accessories

■

It is very important to locate the LCD Display in a suitable environment.

■ The surface for placing and fi xing the LCD Display should be stable.

■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,

water, moisture and vibration.

■ Convenience for connecting the LCD Display to the related facilities should be well considers too.

The LCD Display comes with the standard parts shown on the package contents. Check and make sure they are in­cluded and in good condition. If anything is missing, or damage, contact the supplier immediately.

1.3 Unpacking

1.2 Before Installation

Chapter 1

P. 2

1. Power Cord

1.1 IEC power cord

1.2 NEMA 5-15 power cord (US)

1.3 BS 1363 power cord (UK)

1.4 CEE 7/4 power cord (German)

1.5 AS 3112 power cord (Australia)

2.1 AP-17 series Package Contents Chapter 2

P. 3

LCD display x 1 pc

6' VGA cable (male to male) x 1 pc

User manual x 1 pc

Power cord x 1 pc

Auto switch power adapter x 1pc

Mounting bracket A x 4 pcs

Mounting bracket B x 12 pcs

M4*6mm screw x 8 pcs

M4*50mm screw x 12 pcs

5

4

2

1

3

U

s

e

r

M

a

n

u

a

l

1

5

4

3

2

7

9

6

8

8

6
7

9

Remarks

■ AP Series mounting bracket set includes item 6 - 9, please refer to p.6-7

P. 4

2.2 AP-17 series Structure Diagram Chapter 2

5

1

2

3

Front View

Rear View

4

Rear case

SAMSUNG Class A TFT LCD panel

4mm protective glass

1

2

6mm aluminum front bezel

LCD membrane

4

5

3

2.3 AP-17 series Dimension Diagram Chapter 2

Front View

Rear View

P. 5

UNIT : mm

1mm = 0.03937 inch

2.4 AP-17 series Mounting Method Chapter 2

1

43

2

Mounting bracket A

x 4 pcs

x 12 pcs

x 8 pcs

x 12 pcs

Mounting bracket B

P. 6

M4*6mm screw

M4*50mm screw

Mounting bracket A

Mounting bracket B

2.4 AP-17 series Mounting Method Chapter 2

100mm VESA standard

P. 7

Remarks

■ Hardware and M4*4 pcs for VESA mounting is not provided

UNIT : mm

1mm = 0.03937 inch

3.1 NAP-17 series Package Contents Chapter 3

P. 8

Remarks

■ NAP Series mounting bracket set includes item 6 - 9, please refer to p.11-12

LCD display x 1 pc

6' VGA cable (male to male) x 1 pc

User manual x 1 pc

Power cord x 1 pc

Auto switch power adapter x 1pc

Mounting bracket A x 4 pcs

Mounting bracket B x 12 pcs

M4*6mm screw x 8 pcs

M4*50mm screw x 12 pcs

5

4

2

1

3

U

s

e

r

M

a

n

u

a

l

1

5

4

3

2

7

9

6

8

8

6
7

9

P. 9

3.2 NAP-17 series Structure Diagram Chapter 3

5

1

2

3

Front View

Rear View

4

Rear case

SAMSUNG Class A TFT LCD panel

4mm protective glass (Front NEMA 4 / IP65 protection)

1

2

6mm aluminum front bezel

LCD membrane

4

5

3

3.3 NAP-17 series Dimension Diagram Chapter 3

P. 1 0

Front View

Rear View

UNIT : mm

1mm = 0.03937 inch

3.4 NAP-17 series Mounting Method Chapter 3

P. 11

1

43

2

Mounting bracket A

x 4 pcs

x 12 pcs

x 8 pcs

x 12 pcs

Mounting bracket B

M4*6mm screw

M4*50mm screw

Mounting bracket A

Mounting bracket B

3.4 NAP-17 series Mounting Method Chapter 3

P. 1 2

100mm VESA standard

Remarks

■ Hardware and M4*4 pcs for VESA mounting is not provided

UNIT : mm

1mm = 0.03937 inch

4.1 DP-17 series Package Contents Chapter 4

P. 1 3

LCD display x 1 pc

6' VGA cable (male to male) x 1 pc

User manual x 1 pc

Power cord x 1 pc

Auto switch power adapter x 1pc

5

4

2

1

3

U

s

e

r

M

a

n

u

a

l

1

5

4

3

2

P. 1 4

5

4.2 DP-17 series Structure Diagram Chapter 4

1

2

3

Front View

Rear View

4

Rear case

SAMSUNG Class A TFT LCD panel

4mm protective glass

1

2

1.2mm front aluminum cover

LCD membrane

4

5

3

4.3 DP-17 series Dimension Diagram Chapter 4

Front View

Rear View

P. 1 5

UNIT : mm

1mm = 0.03937 inch

100mm VESA standard

P. 1 6

4.4 DP-17 series Mounting method Chapter 4

Remarks

■ Hardware and M4*4 pcs for VESA mounting is not provided

UNIT : mm

1mm = 0.03937 inch

5.1 OP-17 series Package Contents Chapter 5

P. 1 7

LCD display x 1 pc

6' VGA cable (male to male) x 1 pc

User manual x 1 pc

Power cord x 1 pc

Auto switch power adapter x 1pc

5

4

2

1

3

U

s

e

r

M

a

n

u

a

l

1

5

4

3

2

P. 1 8

5.2 OP-17 series Structure Diagram Chapter 5

4

1

2

Front View

Rear View

Rear case

SAMSUNG Class A TFT LCD panel

1

2

Universal open frame mounting

LCD membrane

3

3

4

5.3 OP-17 series Dimension Diagram Chapter 5

Front View

Rear View

P. 1 9

UNIT : mm

1mm = 0.03937 inch

Universal open frame mounting

P. 2 0

Remarks

■ Hardware for fixing the LCD display is not provided

5.4 OP-17 series Mounting method Chapter 5

100mm VESA standard

Remarks

■ Hardware and M4*4 pcs for VESA mounting is not provided

UNIT : mm

1mm = 0.03937 inch

P. 2 1

6.1 Connection Chapter 6

Caution : The LCD Display are hot-pluggable, but components of connected devices may

not be hot-pluggable. Plugging and unplugging cables while connected devices are pow-

ered on may cause irreversible damage of the devices and LCD Display. Before attempting

to connect anything to the LCD Display, we suggest that turn off power to all devices before

connecting them. Apply power to connected devices again only after the LCD Display re-

ceiving power.The company is not responsible for damage caused in this way.

Power

7.1 On-screen Display Operation Chapter 7

Exit the OSD screen
Shortcut key to auto adjustment by pressed the button for 5 seconds or

Toggle analog, digital & video connection (DVI-D and video options only)

Scrolls through menu options and adjusts the displayed control

Display the OSD menu

Power on / off LCD

Power light

Green = On

Orange = Power saving

LCD membrane

VGA

P. 2 2

7.2 On-screen Menu Chapter 7

BRIGHTNESS / CONTRAST

Brighthtness: Adjust background black level of the screen image.

Contrast: Adjust the difference between the image background (black level)

and the foreground (white level).

AUTO ADJUST

Auto Adjust: Fine tunes the video signal to eliminate waviness and distortion. A "Adjusting" message is displayed

during the process.

Auto Tune: Optimize phase, clock, position and size. An "Adjusting" message is displayed during the process.

PHASE/CLOCK
Phase / Clock: To enter into the phase & clock sub menu

H/V POSITION

H/V Position: Align the screen image left or right and up or down.

MISC

Information: Display the current resolution, refresh rate and frequency information on the screen.

OSD Timer: Set the time duration in seconds that the OSD is visible after the last button is pressed.

The factory default is 10 seconds.

Color: Select the screen color - 5500K, 6500K & 9500K. The factory default is 9500 K.

Language: Select the language in which the OSD menu is displayed -

English, Chinese (中文), Japanese (日本語), German, French, Spanish, Italian

RESET Restore the settings to factory defaults.

MAIN MENU

BRIGHTNESS/CONTRAST

PHASE/CLOCK

H/V POSITION

MISC

RESET

AUTO ADJUST

Item Description

LCD Manufacturer

Diagonal Size 17" TFT
Max. Resolution 1280 x 1024
Brightness (cd/m²) 300
Color Support 16.2 Mil.
Contrast Ratio (typ.) 700:1
Viewing Angle (H/V) 150˚ x 135˚
Display Area (mm) 338 x 270
Tr Response Time (ms) 2

Display Input Signal Analog RGB
Connection DB15 connector
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 40 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.

Options

Graphic Input DVI-D, BNC, S-Video & RCA video input

DC Power DC power input with 12V, 24V, 48V selection

Touchscreen Resistive and capacitive

Environmental

Operation 0˚ to 50˚C Degree

Storage -5˚ to 65˚C Degree

Relative Humidity 5~90%, non-condensing

Shock 10G acceleration (11ms duration)

Vibration 5~500Hz 1G RMS random vibration

P. 2 3

8.1 LCD Specifi cations Chapter 8

P. 2 4

9.1 DVI-D Option Chapter 9

DVI-D

Remarks

■ Package includes with a 6' DVI-D cable

9.2 S-Video + RCA Input Option

Remarks

■ Package includes an extra 6ft S-Video and 6ft RCA cables

VGAPower

S-VideoVGAPower

9.3 S-Video + BNC Input Option

Remarks

■ Package includes an extra 6ft S-Video cable

VGAPower

RCA

S-VideoBNC

9.4 On-screen Menu for DVI, BNC, S-Video & RCA Input Chapter 9

P. 2 5

1. Image

Brightness: Adjust background black level of the screen image

Contrast: Adjust the difference between the image background

(black level) and the foreground (white level)

Sharpness: Adjust the image from weak to sharp

Saturation: Adjust the saturation of the image color

Hue: Adjust the screen hue value

2. Geometry

Auto Confi g: Adjust automatically sizes, centers, and fi ne tunes the video

signal to eliminate waviness and distortion.An “ Adjusting”
message is displayed during the process.

H. Position: Align the screen image left or right

V. Position: Align the screen image up or down

Clock : Adjust the clock value
Phase: Aldjust the phase value

3. Function

OSD Position: Adjust OSD menu horizontal and vertical position

OSD Zoom: Adjust the difference between the image background

(black level) and the foreground (white level).

Color Temp: Select the screen color - 5500K, 6500K & 9500K.
The factory default is 6500 K.

4. System

Language: Select the language in which the OSD menu is displayed -

English, Chinese (中文), Japanese (日本語), German,

French, Spanish, Italian.

Time: Function is not supported

Power OFF: Function is not supported
Reset: Recall returns the adjustments back to factory settings.

Note : The current resolution and refresh rate information show on the top right hand side

of the screen when the LCD powered on.

P. 2 6

10.1 Touchscreen Options Chapter 10

3M Capacitive

e-Resistive

Remarks

■ USB touchscreen package includes an extra 6ft USB cable, quick reference guideline and CD disc

■ Serial touchscreen package includes an extra 6ft serial cable, quick reference guideline and CD disc

■ For detailed information, please refer to the attached CD disc

■ As the touchscreen unit is not made of toughened glass, please handle it carefully.

USBVGAPower

SerialVGAPower

USB interface

Serial interface

Model -17TRB / -17TRS

Screen size 17"
Interface USB / serial
Optical transmittance 82%±5%
Surface hardness ≥3H (JIS K5400)
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux

Model -17TCB_3M / -17TCS_3M

Screen size 17"
Interface USB / serial
Optical transmittance 88%
Surface hardness Mohs’ hardness rating: 6
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux

10.1 Touchscreen Options Chapter 10

P. 2 7

Touchscreen Quick User Guidelines

e-Resistive touchscreen provides more accurate 25 points calibration for touch sensor.

■ Press [ Clear ] to clear the previous calibration records.

■ Press [ Yes ] to clear previous records. The record

will bcome default record.

■ Press [ 25ptCal ] to do 25 points calibration. Correct

25 point locations on screen with the panel.

■ Touch the blinking symbol on panel until beep or

stop blinking.

■ After the calibration, the new record will overwrite

the old one.

Caution :

■ At the fi rst assembly of touch screen, we suggest applying 25 points calibration.

■ For a more accurate calibration of touch screen, please apply 25 points calibration.

P. 2 8

11.1 DC Power Options Chapter 11

Model 12V 24V 48V

Input rating

Input voltage: 12-Volt 24-Volt 48-Volt

Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V

Input current

- No load 50 mA 50mA 50 mA

- Full load 4950 mA 2450 mA 1220 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 4.16A

Effi ciency 84% 85% 85%

Remarks

■ Package does not include power cord and AC power adapter

VGADC Power

P. 2 9

12.1 Troubleshooting Chapter 12

1. How do I adjust the resolution?

To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in

Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-

mined by the display card in your computer.

2. Is interference signal appeared on LCD normal when shutting down the computer ?

In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered

normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.

3. The membrane button power light is not ON

Press the power On /Off on LCD membrane button to check if the monitor is in the ON mode.

Check the power cord is properly connected to the LCD keyboard drawer and power outlet.

4. Screen image is not centered or sized properly

Press the button for two seconds to automatically adjust the image.

Adjust the H-position and V-position settings via On-screen menu.

5. Must calibration be down after installation completed?

After connecting your touch monitor and installing the software, you must calibrate the touchscreen. Calibration serves two

purposes:

(A) Set the active area of the touchscreen.

(B) Align the touchscreen’s active area to the underlying video.

6. The touchscreen is not accurate

Calibration should be required.

Make sure to touch the centre of each X once at a time.

7. The touchscreen is accurate in most areas, but off a lot in certain area

The touchscreen may have linearity problems. Please use touch screen and select more points calibration.

8. Why can the display not match to the touchscreen correctly after calibration?

The touchscreen will be aged after a certain period of consumption or under harsh environment. It is normal.

The touchscreen driver has an utility to adjust the situation. The calibration point can be more on the touch

screen.

P. 3 0

13.1 Dimensions Chapter 13

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net Weight

Gross

Weight

AP-17 series

415 x 57 x 328 mm

16.3 x 2.2 x 12.9"

653 x 112 x 558 mm

25.7 x 4.4 x 22"

5.5 kg

12.1 lb

7.5 kg

16.5 lb

NAP-17 series

438 x 59 x 363 mm

17.2 x 2.3 x 14.3"

653 x 112 x 558 mm

25.7 x 4.4 x 22"

5.5 kg

12.1 lb

7.5 kg

16.5 lb

DP-17 series

393 x 52 x 311 mm

15.5 x 2 x 12.2"

653 x 112 x 558 mm

25.7 x 4.4 x 22"

5.5 kg

12.1 lb

7.5 kg

16.5 lb

OP-17 series

416 x 50 x 334 mm

16.4 x 2 x 13.1"

653 x 112 x 558 mm

25.7 x 4.4 x 22"

5.5 kg

12.1 lb

7.5 kg

16.5 lb

P. 3 1

14.1 Cleaning the LCD display Chapter 14

You may need the following precautions before you begin to clean the LCD display, please read and understand the

details below fully.

1. Make sure the monitor is turned off

2. Never spray or pour any liquid onto the screen directly

3. To remove dust and other particles, wipe the screen with a clean, soft, lint-free cloth.

4. Be cautions of all kinds of cleaning solvents or chemicals, some individuals may be harmful to the LCD display.

5. If the LCD display is still not clean enough, apply a small amount of non-ammonia, non-alcohol based glass

cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

6. Don’t use water or oil on the monitor directly.

UV-017-1007V1

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which
may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.

Copyright 2007 Austin Hughes Electronics Ltd. All rights reserved.