Austin Hughes UltraView DP-X24, UltraView AP-X24, UltraView OP-X24, UltraView NAP-X24 User Manual

Download

Page 1

UM-UV-621-X24-Q119V2 www.austin-hughes.com

NAP-X24

Aluminum front bezel

OP-X24

Universal Mounting Open Frame

AP-X24

Front NEMA4 / IP65

User Manual

dedicated LCD display solutions

24” High Resolution 1920 x 1200 LCD

DP-X24

Aluminum front cover

Designed and manufactured by Austin Hughes

Page 2

UM-UV-621-X24-Q119V2 www.austin-hughes.com

Legal Information

First English printing, March 2019 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁ re or electrical shock.

■ Only qualiﬁ ed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁ ed service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modiﬁ ed or removed.

■ Damage, deterioration or malfunction resulting from:

□ Accident, misuse, neglect, ﬁ re, water, lightning, or other acts of nature, unauthorized product modiﬁ cation, or

failure to follow instructions supplied with the product.

□ Repair or attempted repair by anyone not authorized by us. □ Any damage of the product due to shipment. □ Removal or installation of the product. □ Causes external to the product, such as electric power ﬂ uctuation or failure. □ Use of supplies or parts not meeting our speciﬁ cations. □ Normal wear and tear. □ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modiﬁ cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Page 3

UM-UV-621-X24-Q119V2 www.austin-hughes.com

Contents

< Part. 1 > AP-X24 / NAP-X24

1.1 Package Content P.1

1.2 Structure Diagram & Dimension P.2 - 3

1.3 Mounting Hardware & Installation P.4

< Part. 2 > DP-X24

2.1 Package Content P.5

2.2 Structure Diagram & Dimension P.6 - 7

2.3 Mounting Hardware & Installation P.8

< Part. 3 > OP-X24

3.1 Package Content P.9

3.2 Structure Diagram & Dimension P.10 - 11

3.3 Mounting Hardware & Installation P.12

< Part. 4 > Speciﬁ cations / OSD

4.1 Product Speciﬁ cations P.13 - 14

4.2 On-screen Display Operation ( OSD ) P.15 - 16

4.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP ) P.17 - 18

4.4 Remote Controller ( RC-2 ) P.19

< Part. 5 > Options

5.1 Option Table P.20

5.2 3G / HD / SD-SDI Broadcast-grade input P.21

5.3 MCS Multi-display control solution P.22

5.4 Resistive ( 1-point touch ) P.23 - 24

5.5 DC Power : 24V / 48V / 125V P.25

5.6 MIL-type or lockable connector P.26

Page 4

UM-UV-621-X24-Q119V2 www.austin-hughes.com

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made speciﬁ cally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the ﬁ nish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood

based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁ ber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁ ber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microﬁ ber cloth ﬁ rst, not directly on the parts you are cleaning.

Page 5

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 1

Mounting hardware X 1 pack

- Mounting bracket x 4 pcs

- M4* 6mm screw x 8 pcs

- M4* 50mm screw x 8 pcs

24” High Resolution LCD display X 1

6ft VGA cable X 1

Power cord X 1

Remote controller X 1

AP-X24 / NAP-X24

< Part 1 > AP-X24 / NAP-X24 < 1.1 > Package Content

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

Audio

Power

out in

VGADVI-D

HDMI

S-VideoBNC

Basic I/O

Page 6

UM-UV-621-X24-Q119V2 www.austin-hughes.comP. 2

Rear case

LCD panel

6mm aluminum front bazel

Audio speaker, pair

LCD membrane

Remote sensor

AP-X24

NAP-X24

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

AP-X24

620.4 x 70.1 x 426 mm

24.4 x 2.8 x 16.8 inch

701 x 121 x 685 mm

27.6 x 4.8 x 27 inch

10.9 kg 24 lb

14.7 kg

32.3 lb

NAP-X24

620.4 x 70.1 x 426 mm

24.4 x 2.8 x 16.8 inch

701 x 121 x 685 mm

27.6 x 4.8 x 27 inch

12.8 kg

28.2 lb

16.6 kg

36.5 lb

< 1.2 > Structure Diagram

Rear view

Bottom view

Front view Side View

Page 7

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 3

AP-X24

NAP-X24

UNIT : mm

1mm = 0.03937 inch

Front View Side View

Rear View

Bottom View

< 1.2 > Dimension

Page 8

UM-UV-621-X24-Q119V2 www.austin-hughes.comP. 4

x 4 pcs

Mounting

bracket

x 8 pcs

M4*6mm screw

2 3

x 8 pcs

M4*50mm screw

Hardware set part no. UV-BK#2

■ Install 4 mounting brackets with 8 x M4*6mm screws

■ Adjust the LCD panel with 8 x M4*50mm screws and ﬁ x it on the surface.

Steps

■ Hardware and M4*4 pcs for VESA mount are not provided

VESA mount ( 100*100mm )

M4 screw

< 1.3 > Installation

( I ) Panel mount

( II ) VESA mount ( 100*100mm )

Page 9

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 5

24” High Resolution LCD display X 1

6ft VGA cable X 1

Power cord X 1

Remote controller X 1

DP-X24

< Part 2 > DP-X24 < 2.1 > Package Content

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

Audio

Power

out in

VGADVI-D

HDMI

S-VideoBNC

Basic I/O

Page 10

UM-UV-621-X24-Q119V2 www.austin-hughes.comP. 6

DP-X24

< 2.2 > Structure Diagram

Front view Side View

Rear case

LCD panel

6mm aluminum front cover

Audio speaker, pair

LCD membrane

Rear view

Bottom view

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

DP-X24

589.4 x 81.7 x 395 mm

23.2 x 3.2 x 15.6 inch

701 x 121 x 685 mm

27.6 x 4.8 x 27 inch

10 kg

22 lb

13.7 kg

30.1 lb

Page 11

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 7

Front View Side View

Rear View

UNIT : mm

1mm = 0.03937 inch

Bottom View

< 2.2 > Dimension

DP-X24

Page 12

UM-UV-621-X24-Q119V2 www.austin-hughes.comP. 8

< 2.3 > VESA mount Installation

■ Hardware and M4*4 pcs for VESA mount are not provided

VESA mount ( 100*100mm )

M4 screw

Page 13

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 9

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

Audio

Power

out in

VGADVI-D

HDMI

S-VideoBNC

Basic I/O

24” High Resolution LCD display X 1

6ft VGA cable X 1

Power cord X 1

Remote controller X 1

OP-X24

< Part 3 > OP-X24 < 3.1 > Package Content

Page 14

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.10

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

OP-X24

617.4 x 63.6 x 423 mm

24.3 x 2.5 x 16.7 inch

701 x 121 x 685 mm

27.6 x 4.8 x 27 inch

9 kg

19.8 lb

12.7 kg

27.9 lb

Rear case

LCD panel

Audio speaker, pair

Universal open frame mounting

LCD membrane

Extended remote sensor membrane cable

( 66cm from AD board to sensor end )

OP-X24

Front view

Rear view

Side View

Bottom view

< 3.2 > Structure Diagram

Page 15

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P. 11

Front View Side View

Rear View

OP-X24

UNIT : mm

1mm = 0.03937 inch

Bottom View

< 3.2 > Dimension

Page 16

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.12

M4 screw

( I ) Universal mount

( II ) VESA mount ( 100*100mm )

Hardware and M4*4 pcs for VESA mounting are not provided

< 3.3 > Installation

Page 17

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.13

< Part 4 > < 4.1 > Product Speciﬁ cations

Mechanical Design

AP-X24 NAP-X24 DP-X24 OP-X24

Protection 6mm front bezel NEMA 4 / IP65 front cover open frame

Front Panel Black, RAL 9005 -

Rear Casing Black, RAL 9005

VESA mount 100 x 100 mm

Universal mount - - ready

Desktop stand option option -

Panel mount bundled - -

Video

Digital DVI DVI-D single link

HDMI HDMI 1.3 / HDCP 1.3

Analog VGA Analog 0.7Vp-p

Composite ( BNC ) NTSC & PAL

S-Video ( 4-pin ) NTSC & PAL

Power

Input

Auto-sensing 100 to 240VAC, 50 / 60Hz

Consumption:

Screen ON Max. 40W

Power saving mode Max. 5W

Power button OFF Max. 1W

Compliance

EMC

FCC & CE certiﬁ ed

Safety

CE / LVD certiﬁ ed

Environment

RoHS2 & REACH compliant

LCD Panel

Panel Size ( diagonal ) 24.1-inch Widescreen TFT color LCD

Native resolution 1920 x 1200

Brightness ( cd/m

) 300

Contrast Ratio ( typ. ) 1000:1

Colors 16.7 M

Viewing Angle ( L/R/U/D ) 89/89/89/89

Response Time ( ms ) 14

Dot pitch ( mm ) 0.27

Display Area ( mm ) 518.40H x 324.0V

Surface treatment Anti-glare, Hard-coating

Surface hardness 3H

Backlight Type LED

MTBF ( hrs ) 30,000

Audio

Input Connector Impedance / Power level

3.5mm stereo jack 30kΩ / 750mV

Output Connector Resistance / Power level

3.5mm stereo jack 30kΩ / 2.8V

Speaker: Dual Stereo 10W x 2

*When the audio output is connected, speaker output is OFF

Page 18

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.14

< 4.1 > Product Speciﬁ cations

Environmental Conditions

Operating

Temperature 0 to 55°C degree

Humidity 20~90%, non-condensing

Altitude 16,000 ft

Storage / Non-operating

Temperature -20 to 60°C degree

Humidity 5~90%, non-condensing

Altitude 40,000 ft

Shock 10G acceleration ( 11ms duration )

Vibration 10~300Hz 0.5G RMS random vibration

Physical Speciﬁ cation

AP-X24 NAP-X24 DP-X24 OP-X24

Product ( W x D x H )

620.4 x 70.1 x 426 589.4 x 81.7 x 395 617.4 x 63.6 x 423

inch

24.4 x 2.8 x 16.8 23.2 x 3.2 x 15.6 24.3 x 2.5 x 16.7

Packing ( W x D x H )

701 x 121 x 685

701 x 121 x 685 701 x 121 x 685

inch

27.6 x 4.8 x 27 27.6 x 4.8 x 27 27.6 x 4.8 x 27

Net Weight 10.9 kg / 24 lb 12.8 kg / 28.2 lb 10 kg / 22 lb 9 kg / 19.8 lb

Gross Weight 14.7 kg / 32.3 lb 16.6 kg / 36.5 lb 13.7 kg / 30.1 lb 12.7 kg / 27.9 lb

Chassis color dark

Chassis materials Aluminum

Applicable Format

DVI-D / VGA Input PC Signal 1920 x 1200 x 60Hz

1360 x 768 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 768 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

Audio Signal 2ch Linear PCM

HDMI Input PC signal Same as VGA

HDMI 1.3 1920 x 1080 x 50 / 60Hz ( 1080p )

1920 x 1080 x 25 / 30Hz ( 1080i )

1280 x 720 x 50 / 60Hz ( 720p )

720 x 480 x 50 / 60Hz ( 576p / 480p )

Audio Signal 2ch Linear PCM

* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals,

the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to ﬁ x the issue.

Page 19

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.15

Exit the OSD screen Toggle analog, digital & video connection (DVI-D and video options only)

Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds)

Display the OSD menu

Power on / off LCD

Power light Green = On Orange = Power saving

Membrane Switch Function

Picture

Picture mode : Standard / Vivid / Soft / User mode to choose

Brightness : Adjust background black level of the screen image

Contrast : Adjust the difference between the image background

(black level) and the foreground (white level)

Hue: Adjust the screen hue value

Saturation : Adjust the saturation of the image color

Picture size : Adjust the image size

Color temp : Standard / Cool / Warm / User to choose

Noise reduce : Reduce the noise of the image

Sharpness :

Adjust the image from weak to sharp

Auto adjust : Automatically adjust sizes, centers and ﬁ ne tunes the

video signal to eliminate waviness and distortion.

Clock : Adjust the clock value

Phase : Adjust the phase value

H. Position : Align the screen image left or right

V. Position : Align the screen image up or down

< 4.2 > On-screen Display Operation ( OSD )

Page 20

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.16

< 4.2 > On-screen Display Operation ( OSD )

Audio

Audio mode : Movie / Voice / Normal / Music mode to choose

Volume : Adjust the volume of sound

Bass :

Set the value of bass sound

Treble : Set the value of treble sound

Balance : Set the balance value of treble and bass sound

Analog TV audio : Set the value of analog TV audio sound

Mute : Turn off the surrounding sound

Auto search : Automatically search

Manual search : Search the TV manual

Fine tune : Fine tune the TV signal

Color system : Adjust the TV color

Sound system : Adjust the TV sound

Channel edit : Edit the channel

MISC

Language : Select the language in which the OSD menu is

displayed - English

Sleep timer : Set the off time

PIP mode :

Adjust picture in picture setting

PIP position : Enter into PIP position

PIP source : Enter into the Sub source and sound source

System reset : Return the adjustment back to factory setting

Information : Select for Help

Page 21

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.17

Mode

Display the Sub screen in the Main screen.

OSD Menu → MISC → PIP Mode → Large / Small / OFF

Sub screen

Main screen

Position

Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )

OSD Menu → MISC → PIP Position → top left / top right / bottom left / bottom right

top left top right

bottom left bottom right

Size

Adjust the size of the Sub screen ( Large / Small )

OSD Menu → MISC → PIP Mode → Large / Small

LCD Monitor Large Sub screen Small Sub screen

1920 x 1200 552 x 414 480 x 360

1920 x 1080 552 x 414 480 x 360

1440 x 900 414 x 310 360 x 270

1366 x 768 392 x 294 340 x 254

1280 x 1024 368 x 276 320 x 240

Size of Sub screen

< 4.3 > How to Use Picture In Picture ( PIP ) /

Picture By Picture ( PBP )

< 4.3.1 > Picture in Picture ( PIP )

Page 22

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.18

Sub screenMain screen

Mode

Display the Sub screen next to the Main screen.

OSD Menu → MISC → PIP Mode → PBP

Size

LCD Monitor Main / Sub screen

1920 x 1200 955 x 716

1920 x 1080 955 x 716

1440 x 900 715 x 536

1366 x 768 678 x 508

1280 x 1024 635 x 476

< 4.3.2 > Picture By Picture ( PBP )

< 4.3.3 > PIP / PBP Source

To select an input signal for PIP / PBP Sub screen.

OSD Menu → MISC → PIP Source → VGA / S-Video / Composite / DVI / HDMI / SDI / YPbPr / TV

Sub Main

VGA S-Video Composite DVI-D HDMI SDI YPbPr TV

VGA

xo o ooooo

S-Video

ox x oooox

Composite

ox x oooox

DVI

oo o xxooo

HDMI

oo o xxooo

SDI

oooooxxo

YPbPr

oooooxxo

ox x oooox

The PIP / PBP is operable in the following table :

Page 23

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.19

< 4.4 > Remote Controller ( RC-2 )

AUTO

-/--

8 9

PIP

MENU SELECT

BACK

EXIT

SOURCE

POSITION

SWAP

PIP

AUDIO

ASPECT

SLEEP

PIP

ENTER

FREEZE

MUTEINPUT

VOL

INPUT Select the source

Switches on or off the TV

0 - 9

Only use in TV mode. Select channels. For channel numbers 10 and above, enter the second digit within two seconds.

AUTO Auto adjust MENU Display the menu on the screen or go to the previous menu

▲ / ▼ / ◄ / ► / ENTER

Go to the upper menu or select the previous value / Go to the next menu or select the next value / Decrease the setting value / Increase the setting value or enter to the select item setting Enter to the select item settings or excude the setting

BACK Back to previous value MUTE Turn on or off the speaker Vol + / - Increase or decrease the speaker volume CH + / - For TV model only, increase or decrease the channel number FREEZE Reserve for OEM model

- / -- For setting input single or double digits ASPECT Adjust the screen size SELECT To select the existing item SLEEP Select the sleeping time EXIT Exit the menu or cancel

PIP functions PIP

Picture in picture

PIP AUDIO To set the audio of in PIP mode POSITION To set the screen position in PIP mode SOURCE PIP Source SWAP Swap screen in PIP mode

Page 24

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.20

< Part 5 > Option < 5.1 > Option Table

Options AP / NAP DP OP

SDI ***

✓✓✓

Touchscreen

✓✓✓

MCS multi-display control ***

✓✓✓

DC Power

✓✓✓

MIL-type / lockable connector

✓✓✓

Page 25

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.21

Audio

Power

out in

VGADVI-D

HDMI

S-VideoBNC

SDI

out - in

*** For SDI option, the AD board comes standard with HDMI, DVI-D, VGA, S-Video, BNC and audio inputs.

Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.

Designed for use with UltraView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.

INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )

3G-SDI OUT BNC x 1 / Active through, equalized & relocked

Standard Compliance Video SMPTE 425M / 274M / 296M / 125M

ITU-R BT.656

Audio SMPTE 299M / 272M-C

Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video

HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video

SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /

Asynchronized Video

Compatible Video Format 3G-SDI 1080p

1080p 1080i 720p

@60 / 50Hz, 4:2:2 @30 / 25 / 24Hz, 4:4:4 @60 / 50Hz, 4:4:4 @60 / 50Hz, 4:4:4

HD-SDI 1080p

1080i 720p

@30 / 25 / 24Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60 / 50Hz, 4:2:2

SD-SDI 480i @60Hz, 4:2:2

ITU-R BT.656 576i @50Hz, 4:2:2

Max. Transmission Distance 75 ohm coaxial cable

3G-SDI 150m at 2.97Gb/s

HD-SDI 250m at 1.485Gb/s

SD-SDI 480m at 270Mb/s

< 5.2 > Options : 3G / HD / SD-SDI input

Page 26

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.22

Audio

Power

out in

VGADVI-D

HDMI

S-VideoBNC

Link

MCS

inoutset

For the 1st and last display,

push the set switch upward

Set switch

For other daisy chain displays,

push the set switch downward

LINK

OUT

IN OUT

RS-232C

Cat5 / 6 cable

max. 300 meters

up to 64 displaysDaisy chain up to 1,000

meters and 64 displays

RJ-45 jack

IN OUT IN OUT

Cat5 / 6 cable

max. 300 meters

Cat5 / 6 cable

max. 300 meters

15 feet serial cable

( over 15 feet, extender required )

*** Please download the protocol of MCS control at :

http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf

More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various UltraView LCD display up to 64 units.

The RS-232C is used for the communication between the PC and the ﬁ rst display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.

Designed for use with UltraView LCD displays, Austin Hughes provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.

MCS ( Multi-display Control )

< 5.3 > Options : MCS

Page 27

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.23

Model TRB e-Resistive

Technology

5-Wire Resistive

Touch Point

Single

Input Type

Finger or Stylus

Resolution

2048 x 2048

Touch Point Accuracy

Response Speed

15 ms

Activation Force

≤ 50 g

Surface Hardness

Light Transmission

80% ± 3%

Haze

8% ± 3%

Durability

10 million touches

Top Layer

ITO Film

Bottom Layer

ITO Glass

Thickness

2.2 ± 0.2 mm

Connector

USB Type A

Compatibility

Windows 7 / XP / Vista, Linux

■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc

■ For detailed information, please refer to the attached CD disc

■ As the touchscreen unit is not made of toughened glass, please handle it carefully

X24" USB Touchscreen Speciﬁ cation

< 5.4 > Options : Touchscreen & driver

Power VGADVI-D

HDMI

USB Touchscreen

Page 28

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.24

< 5.4 > Options : Touchscreen & driver

TRB Driver

Step 1. Run the bundled CD disc or download the driver from the link below :

http://www.austin-hughes.com/resources/driver/ultraview

Step 2. Double click the Setup.exe

Step 3. Follow the installation instruction to ﬁ nish the setup

Step 4. After installation, run the TouchKit program & the “4 point calibration”

Please follow the below steps to setup the touch screen:-

Please do the initial calibration after the ﬁ rst setup

Page 29

UM-UV-621-X24-Q119V2 www.austin-hughes.com

24” High Resolution LCD Display

P.25

Model 24V 48V 125V

Input rating

Input voltage: 24-Volt 48-Volt 110-Volt

Input range: 18 ~ 36V 36 ~ 75V 66 ~ 160V

Input current

- No load 50 mA 50 mA 35 mA

- Full load 4880 mA 2442 mA 749 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 6.25A

Efﬁ ciency 85% 85% 91%

< 5.5 > Options : DC Power

( 1 ) If the unit with LCD, earthing may be required

For DC power option :

***

Page 30

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.26

Input Part no. MIL Standard

MIL - type Connector

DC Power *** ( Male )

MS3470W8-33P MIL - DTL - 26482

VGA *** ( Male )

MS3470W14-15P MIL - DTL - 26482

Input Part no. Standard

Lockable Connector

DC Power ( Male )

YM-Ext-461CP001 D-type 3W3

USB LUSB - A111 - 00 -

< 5.6 > Options : MIL-type or Lockable Connector

*** There are several additional MIL DC and VGA connector types with varying design

characteristics to meet cost considerations and to provide users with the most design ﬂ exibility possible. For more information, please contact us.

*** MIL - type or Lockable connectors above can be integrated with our LCD displays.

Sale service just for connectors not provided.

Page 31

UM-UV-621-X24-Q119V2 www.austin-hughes.com

Intentionally

Left

Blank

Page 32

UM-UV-621-X24-Q119V2 www.austin-hughes.comP.28

The company reserves the right to modify product speciﬁ cations without prior notice and assumes no responsibility for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.