Austin Hughes MU1604 User Manual
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
dedicated KVM switch and rackmount screen technology
back
back
User Manual - KVM Rear Kit Version
for LCD Console Drawer
Matrix Cat6 KVM
Matrix Cat6 KVM
-MU1602 / 1603 / 1604
-MU3202 / 3203 / 3204
-MUIP1613 / 1624
-MUIP3213 / 3224
Designed and manufactured by Austin Hughes
751
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
MU-1602 MU-1603 MU-1604
MU-3202 MU-3203 MU-3204
2.1 Package contents
2.2 KVM port & Cat6 dongle connection
2.3 Remote console connection
2.4 KVM Cascade
2.5 Specifi cations
3.1 KVM Button
3.2 Password
3.3 KVM OSD
3.4 KVM Hotkey / Remote Console Hotkey
3.5 Resolution Support Information
Contents
< Part 1 > Matrix Cat6 KVM Kit
MU-IP1613 MU-IP1624
MU-IP3213 MU-IP3224
1.1 Package contents
1.2 KVM port & Cat6 dongle connection
1.3 IP & Remote console connection
1.4 IP console setting
1.5 Important Preconfi guration for IP console
1.6 KVM Cascade
1.7 Specifi cations
< Part 2 > Matrix Cat6 KVM Kit
P. 1
P.2
P.3 - 4
P.5
P.6 - 7
P. 8
P. 9
P.11 - 12
P.13
P.14 - 15
P.16
P.17
< Part 3 > Usage
P.18
P.19
P.20
P.21
P.22
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
-MUIP1613
-MUIP3213
< 1.1 > Package Contents
Cascade
-MUIP1624
1Power
Remote Console 1
1
Remote Console 1
2
Power
• Receiver box for remote console x 1
• Power adapter w/ power cord ( for receiver ) x 1
• CE-6 6ft Combo KVM cable for receiver box x 1
back
KVM Rear Kit
-MUIP1613 / -MUIP3213
-MUIP1624 / -MUIP3224
-MUIP3224
Cascade
Matrix Cat6 IP KVM
< Part 1 > Matrix Cat6 KVM
P. 1
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
Cat6 KVM port
USB Servers
PS/2 Servers
DG-100
VGA-PS/2 dongle
DG-100SD
DVI-USB dongle
USB Servers
USB
DVI-D
DG-100S
VGA-USB dongle
USB
VGA
PS/2
VGA
CAT 5 / 6 cable
max. 40 meters
CAT 5 / 6 cable
max. 40 meters
Matrix Cat6 IP KVM
DG-100 VGA-PS/2 dongle
■ To connect DB-15 connector to the computer’s video card
■ To connect PS/2 keyboard connector to the computer’s keyboard port
■ To connect PS/2 mouse connector to the computer’s mouse port
DG-100S VGA-USB dongle
■ To connect DB-15 connector to the computer’s video card
■ To connect USB connector to the computer’s USB port
DG-100SD DVI-USB dongle
■ To connect DVI-D connector to the computer’s video card
■ To connect USB connector to the computer’s USB port
< 1.2 > KVM port & Cat6 dongle connection
P. 2
Drawer KVM Rear Kit
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
I
n
t
e
r
n
e
t
Remote
USB console
Remote
Cat6
Console 1
CAT 5 / 6 cable
max. 100m
Network device
hub or router
Network device
hub or router
Receiver
CAT 5 / 6 cable
max. 100m
CAT 5 / 6 cable
max. 150m
2
1
I
n
t
e
r
n
e
t
P. 3
< 1.3 > IP & Remote console connection
Drawer KVM Rear Kit
Matrix Cat6 IP KVM
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
How to use a receiver to connect a remote console
Receiver
K/B Mouse
Local Remote
Local
Computer
Monitor
Power
USB
Remote I/O
Monitor
CE-6
Combo
KVM cable
Cat6 cable
up to 150m
12V DC Power
Adapter
Local computer
( Optional setup )
VGA
cable
Remote
Console
Button
to
PC
Button
to
KVM switch
P. 4
Matrix Cat6 IP KVM
The receiver provides a hotkey function for remote console. Please refer to P.20
Drawer KVM Rear Kit
Front
Rear
Front
Rear
UM-CV-751-MUKVM-KIT-Q215V3 www.austin-hughes.com
After the cable connection, please take the following steps to confi gure the IP KVM :
1. Download IPKVMsetup.exe from the link:
www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe
2. Double click IPKVMsetup.exe to confi gure the IP KVM by device setup as below.
< 1.4 > IP console setting
- http://192.168.1.22
- http://192.168.1.22 (for 1st IP)
http://192.168.1.23 (for 2nd IP)
11. Open Internet Explorer ( I.E. ), version 6.0 or above
12. Enter the IP KVM address into the address bar
- For Single IP - http://192.168.1.22
- For Dual IP - http://192.168.1.22 ( for 1st IP )
http://192.168.1.23 ( for 2nd IP )
13. Enter username ( default is super )
Password ( default is pass )
14. After successful login to IP KVM, the user will enter the main page of IP KVM
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual from the link :
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-IP.pdf
3. Click Refresh Device to search the connected IP KVM
4. Select the M.A.C. address, which you want to setup, then click Query Device
5. Enter Super user login. The default is super
6. Enter Super user password. The default is pass
7. Enter the new super user password
8. Re-enter the new password
9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confi rm the setting to IP KVM
10. The default address is as below:--
■ The single IP KVM model, such as MU-IP3213
■ The dual IP KVM model, such as MU-IP3224
P. 5
Matrix Cat6 IP KVM
Loading...