UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
M-802 / 803 / 804
M-1602 / 1603 / 1604
Matrix DB-15 KVM
Designed and manufactured by Austin Hughes
751
dedicated KVM switch and rackmount screen technology
User Manual
Matrix DB-15 KVM
M-IP813 / 824
M-IP1613 / 1624
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
3.1 KVM Button
3.2 Password
3.3 KVM OSD
3.4 KVM Hotkey & Remote Console Hotkey
3.5 Resolution Support Information
Contents
< Part 1 > Matrix DB-15 KVM
M-IP813 M-IP824
M-IP1613 M-IP1624
1.1 Package contents
1.2 KVM port connection
1.3 IP, Remote & Local console connection
1.4 IP console setting
1.5 Important Preconfi guration for IP console
1.6 KVM Cascade
1.7 Specifi cations
< Part 2 > Matrix DB-15 KVM
M-802 M-803 M-804
M-1602 M-1603 M-1604
2.1 Package contents
2.2 KVM port connection
2.3 Remote & Local console connection
2.4 KVM Cascade
2.5 Specifi cations
P. 1
P. 2
P.3 - 4
P. 5
P.6 - 7
P. 8
P. 9
P. 11
P.12 - 13
P.14 - 15
P.16
P.17
< Part 3 > Usage
P.18
P.19
P.20
P.21
P.22
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
A
B
Figure 1.
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
Installation for standalone KVM
■ Install each bracket using screws
provided shown in Figure 1.
M3.2 x 4.5 mm M4 x 10 mm
■ Fix the KVM into the rack
Screw A: 2 pcs Screw B: 8 pcs
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
KVM unit
• M-IP813 or U-IP1613 or
M-IP824 or M-IP1624 KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
• Receiver box for remote console x 1
• Power adapter w/ power cord ( for receiver ) x 1
• CE-6 6ft Combo KVM cable for receiver box x 1
< 1.1 > Package Contents
Matrix DB-15 IP KVM
< Part 1 > Matrix DB-15 KVM
P. 1
M-IP813
Local Console
M-IP1613
1
M-IP824
M-IP813 / M-IP1613
M-IP824 / M-IP1624
M-IP1624
Power
Remote Console 1
out in
Cascade
Local Console
1
Remote Console 1
out in
Cascade
2
Power
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
DB-15 Combo KVM port
USB Servers
PS/2 Servers
CE - 6 / 10 / 15 Combo KVM cable
support PS/2 or USB server
Matrix DB-15 IP KVM
CE-6 / CE-10 / CE-15
■ 6 / 10 / 15 ft Combo KVM cable
■ Support PS/2 or USB server
< 1.2 > KVM port connection
P. 2
CE - 6 / 10 / 15 Combo KVM cable
support PS/2 or USB server
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
P. 3
< 1.3 > IP, Remote & Local console connection
I
n
t
e
r
n
e
t
I
n
t
e
r
n
e
t
Remote
USB console
Local
USB
console
Remote
Cat6
Console
CAT 5 / 6 cable
max. 100m
Network device
hub or router
Network device
hub or router
Receiver
CAT 5 / 6 cable
max. 100m
CAT 5 / 6 cable
max. 150m
2
1
Matrix DB-15 IP KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
How to use a receiver to connect a remote console
Receiver
K/B Mouse
Local Remote
Local
Computer
Monitor
Power
USB
Remote I/O
Monitor
CE-6
Combo
KVM cable
Cat6 cable
up to 150m
12V DC Power
Adapter
Local computer
( Optional setup )
VGA
cable
Remote
Console
Button
to
PC
Button
to
KVM switch
P. 4
Matrix DB-15 IP KVM
The receiver provides a hotkey function for remote console. Please refer to P.19
Front
Rear
Front
Rear
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
After the cable connection, please take the following steps to confi gure the IP KVM :
1. Download IPKVMsetup.exe from the link:
www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe
2. Double click IPKVMsetup.exe to confi gure the IP KVM by device setup as below.
< 1.4 > IP console setting
- http://192.168.1.22
- http://192.168.1.22 (for 1st IP)
http://192.168.1.23 (for 2nd IP)
11. Open Internet Explorer ( I.E. ), version 6.0 or above
12. Enter the IP KVM address into the address bar
- For Single IP - http://192.168.1.22
- For Dual IP - http://192.168.1.22 ( for 1st IP )
http://192.168.1.23 ( for 2nd IP )
13. Enter username ( default is super )
Password ( default is pass )
14. After successful login to IP KVM, the user will enter the main page of IP KVM
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual from the link :
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-IP.pdf
3. Click Refresh Device to search the connected IP KVM
4. Select the M.A.C. address, which you want to setup, then click Query Device
5. Enter Super user login. The default is super
6. Enter Super user password. The default is pass
7. Enter the new super user password
8. Re-enter the new password
9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confi rm the setting to IP KVM
10. The default address is as below:--
■ The single IP KVM model, such as M-IP1613
■ The dual IP KVM model, such as M-IP1624
P. 5
Matrix DB-15 IP KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
< 1.5 > Important Preconfi guration for IP console
Matrix DB-15 IP KVM
P. 6
( 1 ) TARGET SERVER SETUP
Resolution
The IP KVM remote console recognizes several varieties of video display formats with resolutions up to 1600 x
1200 @60Hz. (Refer to the User Manual for a list of supported video formats). Minimize bandwidth by setting the
target server’s video resolution to the minimum setting required for your remote monitoring application.
The following video modes are recommended:
(i) 800 x 600 @ 60Hz
(ii) 1024 x 768 @ 60Hz
(iii) 1280 x 1024 @ 60Hz
On a Windows target server system, select Control Panel > Display > Settings.
Modify the screen resolution value as necessary.
Mouse
Use generic mouse drivers for optimum mouse control during remote sessions. Set the mouse pointer speed to a
middle setting with no acceleration or snap-to effects.
On a Windows target server system, select Control Panel > Mouse > Pointer Options
Set the pointer speed to medium and disable Enhanced pointer precision
For Linux GUIs, set the mouse acceleration to exactly 1 and the threshold to exactly 1.
You must complete the following tasks after the IP console setting is performed.
If your keyboard keeps repeating keys when it is plugged into the KVM. Please follow either one below :
( a. )
Enable key release timeout if you experience duplicated keystrokes during poor network performance.
- login to IP KVM remote console
- go to Interfaces KVM settings > Keyboard / Mouse
- click the Key Release Timeout
- adjust Timeout after if necessary
( b. )
Reduce video bandwidth usage if you experience duplicated keystrokes during poor network
- login to IP KVM remote console
- go to Interfaces KVM Settings > User Console > Transmission Encoding,
- select Manually
- adjust Compression to [ 0-none ] and Color depth to [ 8-bit – 256 col ]
**Servers connected to KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Matrix DB-15 IP KVM
< 1.5 > Important Preconfi guration for IP console
P. 7
JAVA Security Issue
Due to the changes from Java security, customer may facing the "JAVA Block" message while
accessing the remote console over IP.
If it said so, here is the workaround solution :
Customer can use the "Exception Site list" feature to run the applications blocked by security setting.
Adding the URL of the blocked application to the Exception Site list allows it to run with some warnings.
Steps to Add URLs to the Exception Site list :
■ Go to the Java Control Panel ( On Windows Click Start and then Confi gure Java )
■ Click on the Security tab
■ Click on the Edit Site List button
■ Click Add in the Exception Site List window
■ Click in the empty fi eld under the Location fi eld to enter the URL ( URL should begin with http:// or https:// )
( 2 ) REMOTE CLIENT COMPUTER SETUP
The remote client computer must have a web browser ( such as Microsoft Internet Explorer, Mozilla Firefox,
and Netscape Navigator ) and a Java Virtual Machine ( version 1.4 or higher ) installed. Enable Java on the
web browser.
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
< 1.6 > KVM Cascade
Matrix DB-15 IP KVM
■ Cascade up to 8 levels, 240 servers
■ Cascading multiple KVM with CMC-8 cascade cable.
M-802
M-802
M-802
M-802
M-1602
M-1602
M-1602
Cascaded KVMs from level 2 to 8 must be the models of M-802 / M-1602 or MU-1602 / MU-3202.
When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other
slave KVM switches (e.g. level 2 to 8).
The slave matrix KVM will be as a port expansion module of the master matrix KVM, the original
remote console on slave KVM will be sacrifi ced and disabled.
Master KVM
Slave KVM
level 2
Slave KVM
level 8
Slave KVM
level 7
Slave KVM
level 6
Slave KVM
level 5
Slave KVM
level 4
Slave KVM
level 3
P. 8
12345678
910111213141516
CMC-8
■ 8ft Matrix KVM cascade cable
To cascade OUT port
out in
Cascade
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
< 1.7 > Specifi cations
P. 9
M-IP813 M-IP824
M-IP1613 M-IP1624
▀
KVM Port
Number of ports: 8 or 16
Connector: DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable
up to 6, 10 & 15 feet
▀
Local Console
Monitor port: 1 x DB-15 VGA ( Up to 1920 x 1080 / 1920 x 1200 )
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
▀
Cat6 Remote Console
Number of remote port: 1
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 500 feet
▀
IP Remote Console
Number of IP console: 1 for M-IP813 / M-IP1613
2 for M-IP824 / M-IP1624
User management: 15-user login, 1 x active user
Browser: Internet Explorer, Firefox, Safari
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
IP Access: RJ45 Ethernet per IP console
▀
Expansion: Up to 240 servers by 8-level cascade
▀
Compatibility
Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac
Support: Windows 7 / Vista / 2003 / XP, Linux, Unix
▀
Power
Input: AC power adapter
Consumption: Max. 48 Watt, Standby 5 Watt
▀
Regulatory
Safety: cUL, FCC & CE certifi ed
Environment: RoHS2 & REACH compliant
▀
Environmental
Operating: 0 to 55°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀
Product Information
Dimension (W x D x H): 443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight: 3 kg / 6.5 lb
▀
Packing Information
Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight: 5 kg / 11 lb
Matrix DB-15 IP KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
P.10
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
KVM unit
KVM unit
KVM unit
M-804 / M-1604
• M-804 or M-1604 KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
• Receiver box for remote console x 3
• Power adapter w/ power cord ( for receiver ) x 3
• CE-6 6ft Combo KVM cable for receiver box x 3
M-803 / M-1603
• M-803 or M-1603 KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
• Receiver box for remote console x 2
• Power adapter w/ power cord ( for receiver ) x 2
• CE-6 6ft Combo KVM cable for receiver box x 2
M-802 / M-1602
• M-802 or M-1602 KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
• Receiver box for remote console x 1
• Power adapter w/ power cord ( for receiver ) x 1
• CE-6 6ft Combo KVM cable for receiver box x 1
Matrix DB-15 KVM
< 2.1 > Package Contents
P. 11
Part 2. Matrix DB-15 KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Matrix DB-15 KVM
M-802
Local Console
M-1602
M-803
M-1603
Power
Remote Console 1
out in
Cascade
Local Console Remote Console 1
out in
Cascade
Power
Remote-2
M-804
M-1604
Local Console Remote Console 1
out in
Cascade
Power
Remote-2
Remote-3
P.12
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
DB-15 Combo KVM port
USB Servers
PS/2 Servers
CE - 6 / 10 / 15 Combo KVM cable
support PS/2 or USB server
CE - 6 / 10 / 15 Combo KVM cable
support PS/2 or USB server
< 2.2 > KVM port connection
P.13
CE-6 / CE-10 / CE-15
■ 6 / 10 / 15 ft Combo KVM cable
■ Support PS/2 or USB server
12345678
910111213141516
Matrix DB-15 KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Matrix DB-15 KVM
P.14
< 2.3 > Local console & remote console connection
Remote
USB console 1
Remote
USB console 2
Local
USB
console
Remote
Cat6
Console 1
Remote
Cat6
Console 3
Remote
USB console 3
Remote
Cat6
Console 2
CAT 5 / 6 cable
max. 150m
Receiver
Receiver
Receiver
CAT 5 / 6 cable
max. 150m
CAT 5 / 6 cable
max. 150m
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Front
Rear
Front
Rear
How to use a receiver to connect a remote console
Receiver
K/B Mouse
Local Remote
Local
Computer
Monitor
Power
USB
Remote I/O
Monitor
CE-6
Combo
KVM cable
Cat6 cable
up to 150m
12V DC Power
Adapter
VGA
cable
Remote
Console
Button
to
PC
Button
to
KVM switch
P.15
The receiver provides a hotkey function for remote console. Please refer to P.19
Local computer
( Optional setup )
Matrix DB-15 KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
M-802
M-802
M-802
M-802
M-1602
M-1602
M-1602
Master KVM
Slave KVM
level 2
Slave KVM
level 8
Slave KVM
level 7
Slave KVM
level 6
Slave KVM
level 5
Slave KVM
level 4
Slave KVM
level 3
CMC-8
■ 8ft Matrix KVM cascade cable
P.16
■ Cascade up to 8 levels, 240 servers
■ Cascading multiple KVM with CMC-8 cascade cable.
< 2.4 > KVM Cascade
Cascaded KVMs from level 2 to 8 must be the models of M-802 / M-1602 or MU-1602 / MU-3202.
When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other
slave KVM switches (e.g. level 2 to 8).
The slave matrix KVM will be as a port expansion module of the master matrix KVM, the original
remote console on slave KVM will be sacrifi ced and disabled.
Matrix DB-15 KVM
To cascade OUT port
out in
Cascade
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
P.17
< 2.5 > Specifi cations
M-802 M-803 M-804
M-1602 M-1603 M-1604
▀
KVM Port
Number of ports: 8 or 16
Connector: DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable
up to 6, 10 & 15 feet
▀
Local Console
Monitor port: 1 x DB-15 VGA ( Up to 1920 x 1080 / 1920 x 1200 )
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
▀
Cat6 Remote Console
Number of remote port: 1 for M-802 / M-1602
2 for M-803 / M-1603
3 for M-804 / M-1604
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 500 feet
▀
Expansion: Up to 240 servers by 8-level cascade
▀
Compatibility
Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac
Support: Windows 7 / Vista / 2003 / XP, Linux, Unix
▀
Power
Input: AC power adapter
Consumption: Max. 48 Watt, Standby 5 Watt
▀
Regulatory
Safety: cUL, FCC & CE certifi ed
Environment: RoHS2 & REACH compliant
▀
Environmental
Operating: 0 to 55°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀
Product Information
Dimension (W x D x H): 443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight: 3 kg / 6.5 lb
▀
Packing Information
Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight: 5 kg / 11 lb
Matrix DB-15 KVM
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
Bank no. 7-Segment BANK LED indication
PC port LEDs Online : Blue LED on indicating a PC is connecting to the port
Active : Green LED on indicating a selected channel
Remote : Orange LED on indicating the port is selecting by IP / remote console
Channel button Press to select channel from 01 to 16
Bank button Select the bank from 1 to 8
Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Recommend Power ON sequence is monitor, KVM switch fi nally computer
Front Panel - Port LED Indications
Bank no. PC port LEDs Channel
button
8 ports
16 ports
Bank
button
3.1 KVM Button
P.18
Part 3. Usage
Matrix DB-15 KVM Usage
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on
number pad)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
Remark: Automatic logout after 10 minutes of inactivity
■ Set your own user name & password
1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password
field
2. Call KVM OSD menu by pressing the KVM hotkey
Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■ Change your password
1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■ Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu
■ Forget your password
Please contact your supplier for further support
Remark:
■ You must press the KVM hotkey within 2 seconds
■ A beep sound will be heard for successful entering KVM hotkey
P.19
3.2 Password
Matrix DB-15 KVM Usage
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
OSD operation
next to the system name The PC is powered on
next to the system name The PC is selected
F1 Access F1 MAIN MENU
F2 Logout the OSD menu
F3 Previous menu
Esc Cancel / Quit
Enter Complete / Switch to selected port
Switch to previous or next port
PgUp/PgDn Switch to previous bank or next bank
1 / 2 / 3 / 4
Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32
Remark: Display port 17 ~ 32 for 32 port model only
3.3 KVM OSD
OSD Menu
F1 Main Menu
01 LANGUAGE OSD language change
02 PORT NAME EDIT Defi ne port name
03 PORT SEARCH Quick searching by port name
04 USER SECURITY Change password
05 ACCESS LIST Defi ne user access authority
06 HOTKEY Change hotkey
07 TIME SETTINGS Modify scan display time interval
08 OSD MOUSE Modify OSD mouse speed
P.20
Matrix DB-15 KVM Usage
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
3.4 KVM Hotkey & Remote Console Hotkey
Local Console Hotkey Function
Scroll Lock + Scroll Lock + Space Bar Calling OSD menu
Right-button mouse + Esc Calling OSD menu
Scroll Lock + Scroll Lock + Switch to previous port
Scroll Lock + Scroll Lock + Switch to next port
Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank
Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specifi c port
Scroll Lock + Scroll Lock + B
Turn the buzzer ON and OFF
* Default the buzzer is ON
Scroll Lock + Scroll Lock + P
Logout the KVM if password security is
ON. Show up the status windows
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock + S
Activate auto-scan mode for connected
servers
*Press any key to exit the auto-scan
mode
Scroll Lock + Scroll Lock + R
Reset all the KVM settings to factory
default
*Except User Security settings
Scroll Lock + Scroll Lock + U
Disable and enable password security
*Default security is ON
Scroll Lock + Scroll Lock + L
To enable / disable the screen saving
function and 10 minutes auto-logout
*Default the screen saving is OFF
Remote Console Hotkey Function
Scroll Lock + Scroll Lock + C Toggle switch between remote & local port
Scroll Lock + Scroll Lock + Q
Turn the buzzer ON & OFF
*Default the buzzer is ON
Scroll Lock + Scroll Lock + S
Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds
Scroll Lock + Scroll Lock + A Auto-adjust the video signal
■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”
- Bank No. : 1 to 8
- Port No. : 01 to 16
- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4
- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6
■ You must press the hotkey within 2 seconds
■ A beep sound will be heard for successful entering
■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp,
PgDn, and Enter keys are supports
P.21
Remarks:
Matrix DB-15 KVM Usage
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
< 3.5 > Resolution Support Information
Resolution Frequency ( Hz )
1600 x 1200 60
1280 x 1024 60
1280 x 960 60
1152 x 864 75
1024 x 768 60 / 70 / 75
800 x 600 60 / 72 / 75
640 x 480 60 / 72 / 75
P.22
IP Console
Resolution Frequency ( Hz )
1600 x 1200 60
1440 x 900 60
1280 x 1024 60
1280 x 960 60
1152 x 864 75
1024 x 768 60 / 70 / 75
800 x 600 60 / 72 / 75
640 x 480 60 / 72 / 75
Remote Console
Matrix DB-15 KVM Usage
UM-CV-751-MKVM-Q215V3 www.austin-hughes.com
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.
Loading...