dedicated LCD display solutions
User Manual
21.5” FHD 1920 x 1080 High Brightness LCD
HAP-F21
Front NEMA4 / IP65
HOP-F21
Universal Mounting Open Frame
Designed and manufactured by Austin Hughes
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Contents
< Part. 1 >
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & Installation
< Part. 2 >
2.1 Package Content
2.2 Structure Diagram & Dimension
2.3 Mounting Hardware & Installation
< Part. 3 >
3.1 Product Specifi cations
3.2 On-screen Display Operation ( OSD )
3.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP )
HAP-F21
HOP-F21
Specifi cations / OSD
P. 1
P.2 - 3
P.4 - 5
P. 6
P.7 - 8
P.9
P.10 - 11
P.12 - 13
P.14 - 15
< Part. 4 >
4.1 Option Table
4.2 3G / HD / SD-SDI Broadcast-grade input
4.3 MCS Multi-display control solution
4.4 AV3.0 Upgrade : S-Video + BNC & Audio
4.5 Projected Capacitive ( 10-point touch )
4.6 DC Power : 24V / 48V / 110 ~ 125V
4.7 MIL-type or lockable connector
4.8 TV ( Analog )
4.9 Auto / switch dimming
Options
Resistive / Capacitive ( single point touch )
P.16
P.17
P.18
P.19 - 20
P.21 - 22
P.22
P.23
P.24 - 25
P.26
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfi ber cloth fi rst, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
< Part 1 >
< 1.1 > Package Content - HAP-F21
HAP-F21
F21" High Brightness LCD Display
F21" High Brightness LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Mounting hardware X 1 pack
- Mounting bracket x 4 pcs
- M4* 6mm screw x 8 pcs
- M4* 50mm screw x 8 pcs
Basic I/O
Power VGADVI-D
Power VGADVI-D
HDMI
AV3.0 upgrade I/O with advanced features
Power
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
S-VideoBNC
Video PC
Audio
HDMI
out - in - in
VGADVI-D
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 1
< 1.2 > Structure Diagram - HAP-F21
1
1
2
2
3
3
4
4
Front view
1
Rear case
2
LCD panel
3
Protective 3mm glass
6mm aluminum front bazel
4
Audio speaker, pair
5
6
LCD membrane
Remote sensor
7
HAP-F21
7
Rear view
7
5
6
Model
HAP-F21
Product Dimension
(W x D x H)
577.8 x 59.1 x 369.3 mm
22.7 x 2.3 x 14.5 inch
Packing Dimension
(W x D x H)
659 x 117 x 640 mm
25.9 x 4.6 x 25.2 inch
Net
Weight
9 kg
19.8 lbs
Gross
Weight
12.7 kg
27.9 lbs
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 2
< 1.2 > Dimension - HAP-F21
Front View Side View
F21" High Brightness LCD Display
HAP-F21
Rear View
UNIT : mm
1mm = 0.03937 inch
Bottom View
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 3
< 1.3 > Panel Mount Installation - HAP-F21
1
Mounting
bracket
x 4 pcs
Hardware set part no. UV-BK#2
M4*6mm screw
2 3
x 8 pcs
M4*50mm screw
x 8 pcs
Steps
■ Install 4 mounting brackets with 8 x M4*6mm screws
■ Adjust the LCD panel with 8 x M4*50mm screws and fi x it on the surface.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 4
< 1.3 > VESA mount Installation - HAP-F21
F21” High Brightness LCD Display
M4 screw
VESA mount ( 100*100mm )
■ Hardware and M4*4 pcs for VESA mount are not provided
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 5
< Part 2 >
< 2.1 > Package Content - HOP-F21
HOP-F21
F21.5" High Brightness LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Basic I/O
Power VGADVI-D
HDMI
AV3.0 upgrade I/O with advanced features
Power
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
S-VideoBNC
Video PC
Audio
HDMI
out - in - in
VGADVI-D
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 6
< 2.2 > Structure Diagram - HOP-F21
F21” High Brightness LCD Display
1
Rear case
2
LCD panel
3
Audio speaker, pair
4
Universal open frame mounting
5
LCD membrane
Extended remote sensor membrane cable
6
( 66cm from AD board to sensor end )
1
2
Front view
HOP-F21
3
6
Rear view
4
5
Model
HOP-F21
Product Dimension
(W x D x H)
574.8 x 52.6 x 366.3 mm
22.6 x 2.1 x 14.4 inch
Packing Dimension
(W x D x H)
659 x 117 x 640 mm
25.9 x 4.6 x 25.2 inch
Net
Weight
6.7 kg
14.7 lbs
Gross
Weight
10.4 kg
22.9 lbs
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 7
< 2.2 > Dimension - HOP-F21
Front View Side View
HOP-F21
Rear View
UNIT : mm
1mm = 0.03937 inch
Bottom View
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 8
< 2.3 > Installation - HOP-F21
( I ) Universal mount
F21” High Brightness LCD Display
( II ) VESA mount ( 100*100mm )
M4 screw
Hardware and M4*4 pcs for VESA mounting are not provided
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 9
< Part 3 >
< 3.1 > Product Specifi cations
Mechanical
Design
LCD
Panel
HAP-F21 HOP-F21
Front Panel Black, RAL 9005 -
Rear Casing Black, RAL 9005 Black, RAL 9005
VESA Mounting 100 x 100mm 100 x 100mm
Other Mounting Panel mount Universal mount
Protection 3mm protective glass -
Panel Size ( diagonal ) 21.5-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1920 x 1080
Brightness ( typ. ) 1000
Contrast Ratio ( typ. ) 5000:1
Color 16.7 M
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 16
Dot pitch ( mm ) 0.24825
Display Area ( mm ) 476.64H x 268.11V
Surface treatment Anti-glare
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
Video
Connectivity
Audio
Connectivity
*When the audio output is connected, speaker output is OFF
Power Power Supply
Digital HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio Input Connector 3.5mm stereo jack
Audio Output
Speaker Output Power 2 x 2W
Power Consumption
VGA Analog 0.7Vp-p
Composite ( RCA ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Impedance / Power level 30kΩ / 750mV
Connector 3.5mm stereo jack
Resistance / Power level 30kΩ / 2.8V
Range
Screen display ON 65W or less
Power saving mode 6W or less
Power button OFF 2W or less
Auto-sensing 100 to 240VAC,
50 / 60Hz
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.10
Regulatory Safety FCC & CE certifi ed
Environmental RoHS2 & REACH compliant
F21” High Brightness LCD Display
Environmental
Conditions
Physical
Specifi cation
Applicable
Format
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Storage
Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
HAP-F21 HOP-F21
Product ( W x D x H )
Packing ( W x D x H )
Net Weight 9 kgs / 19.8 lbs 6.7 kgs / 14.7 lbs
Gross Weight 12.7 kgs / 27.9 lbs 10.4 kgs / 22.9 lbs
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
HDMI Input
Composite / S-Video
Input
PC Signal Same as VGA
Video Signal
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
NTSC 525 lines, 60 fi elds / sec
PAL 625 lines, 50 fi elds / sec
577.8 x 59.1 x 369.3 mm 574.8 x 52.6 x 366.3 mm
22.7 x 2.3 x 14.5 inch 22.6 x 2.1 x 14.4 inch
659 x 117 x 640 mm 659 x 117 x 640 mm
25.9 x 4.6 x 25.2 inch 25.9 x 4.6 x 25.2 inch
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
1080p : 50 / 60Hz
1080i : 50 / 60Hz
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P. 11
< 3.2 > On-screen Display Operation ( OSD )
Power light
Green = On
Orange = Power saving
Membrane Switch Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
1
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness :
2
PC
Adjust the image from weak to sharp
Auto adjust : Automatically adjust sizes, centers and fi ne tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
V. Position : Align the screen image up or down
H. Position : Align the screen image left or right
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.12
< 3.2 > On-screen Display Operation ( OSD )
3
Audio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass :
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
4
TV
Auto search : Automatically search
Fine tune : Fine tune the TV signal
Sound system : Adjust the TV sound
Channel edit : Edit the channel
Set the value of bass sound
Manual search : Search the TV manual
Color system : Adjust the TV color
F21” High Brightness LCD Display
5
MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the off time
PIP mode :
PIP position : Enter into PIP position
Adjust picture in picture setting
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.13
< 3.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP )
< 3.3.1 > Picture in Picture ( PIP )
Mode
Display the Sub screen in the Main screen.
OSD Menu → MISC → PIP Mode → Large / Small / OFF
Main screen
Sub screen
Position
Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )
OSD Menu → MISC → PIP Position → top left / top right / bottom left / bottom right
top left top right
bottom left bottom right
Size
Adjust the size of the Sub screen ( Large / Small )
OSD Menu → MISC → PIP Mode → Large / Small
Size of Sub screen
LCD Monitor Large Sub screen Small Sub screen
1920 x 1200 552 x 414 480 x 360
1920 x 1080 552 x 414 480 x 360
1440 x 900 414 x 310 360 x 270
1366 x 768 392 x 294 340 x 254
1280 x 1024 368 x 276 320 x 240
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.14
< 3.3.2 > Picture By Picture ( PBP )
Mode
Display the Sub screen next to the Main screen.
OSD Menu → MISC → PIP Mode → PBP
Size
LCD Monitor Main / Sub screen
1920 x 1200 955 x 716
1920 x 1080 955 x 716
1440 x 900 715 x 536
1366 x 768 678 x 508
1280 x 1024 635 x 476
F21” High Brightness LCD Display
Sub screenMain screen
< 3.3.3 > PIP / PBP Source
To select an input signal for PIP / PBP Sub screen.
OSD Menu → MISC → PIP Source → VGA / S-Video / Composite / DVI / HDMI / SDI / YPbPr / TV
The PIP / PBP is operable in the following table :
Sub
Main
VGA
S-Video
Composite
DVI
HDMI
SDI
YPbPr
TV
VGA S-Video Composite DVI-D HDMI SDI YPbPr TV
xo o ooooo
ox x oooox
ox x oooox
oo o xxooo
oo o xxooo
oooooxxo
oooooxxo
ox x oooox
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.15
< Part 4 > Options
< 4.1 > Option Table
Options HAP HOP
SDI ***
S-Video * + Composite ( BNC )
Audio
Touchscreen
MCS multi-display control
DC Power
MIL-type / lockable connector
TV ( Analog ) *
Auto / switch dimming
***
The AD board comes standard with HDMI, DVI-D, VGA, S-Video, BNC, audio inputs and
RC-1 remote controller.
*
TV option comes with RC-2 remote controller.
About SDI
Remote Controller
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.16
< 4.2 > Options : 3G / HD / SD-SDI input
Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with UltraView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, Austin Hughes provides a
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
Power
S-VideoBNC
Audio
VGADVI-D
F21” High Brightness LCD Display
SDI
out - in - in
Video PC
HDMI
out - in
*** For SDI option, the AD board comes standard with HDMI, DVI-D, VGA, S-Video, BNC, audio inputs
and RC-1 remote controller ( please refer to P.20 )
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
HD-SDI 1080p
1080i
720p
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Max. Transmission Distance
75 ohm coaxial cable
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
P.17
< 4.3 > Options : MCS
MCS
( Multi-display Control )
Power
S-VideoBNC
Video PC
Audio
out - in - in
HDMI
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various UltraView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and
the fi rst display via a 15 feet serial cable while the CAN bus is
used for the various LCD displays cascade together via CAT 5/6
cable, and daisy chain up to 1,000 meters.
Designed for use with UltraView LCD displays, Austin Hughes
provides a MCS input module without using additional space or
power and it comes standard with a 2-year warranty.
VGADVI-D
*** Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf
MCS
inoutset
Link
RS-232C
15 feet serial cable
( over 15 feet, extender required )
LINK
OUT
IN OUT
Set switch
For the 1st and last display,
push the set switch upward
For other daisy chain displays,
push the set switch downward
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
RJ-45 jack
meters and 64 displays
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Cat5 / 6 cable
max. 300 meters
P.18
Cat5 / 6 cable
max. 300 meters
up to 64 displaysDaisy chain up to 1,000
< 4.4 > AV3.0 Upgrade Options :
F21” High Brightness LCD Display
( S-Video + Composite, BNC )
( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
Audio
HDMI
out - in - in
VGADVI-D
Power
- AV
- Audio
S-VideoBNC
Video PC
***
AV3.0 upgrade option comes with RC-1 remote controller x 1, please refer to P.20
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.19
How to Use RC-1 Remote Controller
1
2
5
3
6
7
4
8
9
1
POWER Switches on or off the TV
2
MUTE Turn on or off the speaker
3
INPUT Switch to signal input mode
4
0- 9
5
V + / - Increase or decrease the speaker volume
6
CH + / - Increase or decrease the channel number
7
MENU Display the menu on the screen or go to the previous menu
Select channels. For channel numbers 10 and above,
enter the second digit within two seconds.
8
AUTO For auto searching
9
- / - For setting one or two input digit
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.20
< 4.5 > Options : Touchscreen & driver
HF21.5" USB Touchscreen Specifi cation
Model
Technology
Touch Point
Input Type
Resolution
Touch Point Accuracy
Response Speed
Activation Force
Surface Hardness
Light Transmission
Haze
Durability
Top Layer
Bottom Layer
Thickness
Connector
Compatibility
TPC-21.5 Multi-touch
Projected Capacitive 5-Wire Resistive Capacitive
10 Single Single
Finger or Capacitive Stylus Finger or Stylus Finger
2048 x 2048 2048 x 2048 2048 x 2048
± 25 mm offset - -
Max. 20 ms 15 ms 20 ms
≤ 10 g ≤ 50 g ≤ 50 g
7H 3H 9H
≥ 88% 80% ± 3% 92% ± 2%
≤ 2% 8% ± 3% 7%
> 100 million touches 10 million touches 300 million touches
1.8 mm Tempered Glass ITO Film
Film ITO Glass
2.2 mm 3.2 ± 0.2 mm 2.8 mm ± 10%
USB Type A USB Type A USB Type A
Windows 7 Windows 7 / XP / Vista, Linux
TRB e-Resistive
TCB e-Capacitive
Glass
■ Dimension will be changed if Multi-touch required
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
Power VGADVI-D
HDMI
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.21
< 4.5 > Options : Touchscreen & driver
TPC-21.5 Driver
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
TRB / TCB Driver
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/downloads/UVDL/driver.html
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to fi nish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the fi rst setup
< 4.6 > Options : DC Power
Model 24V 48V 110 ~ 125V
Input rating
Input voltage: 24-Volt 48-Volt 110-Volt
Input range: 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 40 mA
- Full load 4880 mA 2442 mA 993 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 8.4A
Effi ciency 85% 85% 92%
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.22
< 4.7 > Options : MIL-type or Lockable Connector
Input Part no. MIL Standard
MIL - type
Connector
DC Power ***
( Male )
MS3470W8-33P MIL - DTL - 26482
F21” High Brightness LCD Display
Lockable
Connector
VGA ***
( Male )
There are several additional MIL DC and VGA connector types with varying design
***
characteristics to meet cost considerations and to provide users with the most
design fl exibility possible. For more information, please contact us.
Input Part no. Standard
DC Power
( Male )
USB LUSB - A111 - 00 -
MS3470W14-15P MIL - DTL - 26482
YM-Ext-461CP001 D-type 3W3
*** MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.23
< 4.8 > Options : TV ( Analog )
Power
S-VideoBNC
Audio
TV
VGA
out - in - in
Video PC
***
For TV option :
( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and
RC-2 remote controller.
( 2 ) Casing dimensions will be changed.
HDMI
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.24
How to Use RC-2 Remote Controller
F21” High Brightness LCD Display
20
21
1
PIP
MUTEINPUT
3
6
-/--
EXIT
POSITION
VOL
CH
FREEZE
ASPECT
SLEEP
PIP
PIP
AUDIO
2
1
3
4
7
4
5
6
7
AUTO
MENU SELECT
BACK
SOURCE
2
5
8 9
0
ENTER
SWAP
8
9
10
11
12
13
14
15
16
17
18
19
W
INPUT Select the source
1
2
3
0 - 9
4
AUTO Auto adjust
MENU Display the menu on the screen or go to the previous menu
5
6
▲ / ▼ / ◄ / ► / ENTER
7
BACK Back to previous value
8
MUTE Turn on or off the speaker
9
Vol + / - Increase or decrease the speaker volume
10
CH + / - For TV model only, increase or decrease the channel number
11
FREEZE Reserve for OEM model
12
- / -- For setting input single or double digits
13
ASPECT Adjust the screen size
14
SELECT To select the existing item
15
SLEEP Select the sleeping time
16
EXIT Exit the menu or cancel
Switches on or off the TV
Only use in TV mode. Select channels. For channel numbers 10
and above, enter the second digit within two seconds.
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
f
a
o
t
o
e
r
r
p
PIP functions
17
PIP
18
PIP AUDIO To set the audio of in PIP mode
19
POSITION To set the screen position in PIP mode
20
SOURCE PIP Source
21
SWAP Swap screen in PIP mode
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Picture in picture
P.25
< 4.9 > Options : Auto Dimming
1
2
1
DA-01 Light sensor on OP model
( 66cm from AD board to sensor end )
2
DA-01 Light sensor on AP model
DA-01 light sensor will be installed on the display front panel when auto dimming is ON in OSD
menu. Then the brightness of display is changed according to its environmental brightness.
Once the auto dimming is ON, users cannot adjust brightness in OSD.
Steps : OSD Menu > Picture > Auto Dimming > ON
Light Sensor Operation Range
[cd/m²] [v]
1,000
800
600
200
10
[lx]0 1 100 500 2,000
Options : Switch Dimming
DS-01 is a IP54 dimming knob installed on the right bottom side of the front panel. The display can support
hyper dimming function to adjust brightness from nearly 0% to 100% via a easy-to-use knob.
DS-01 dimming knob
H
Dimensions ( W x H ) : 15.5 x 14.2 mm
W
***
- For this option, front panel and casing dimensions may be changed.
- For HAP series, if DS-01 dimming knob applied, IP protection will be
downgraded from IP65 to IP54.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
P.26
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.
UM-UV-621-HF21-Q215V1 www.austin-hughes.com
Loading...