UM-UV-621-K55-Q318V3 www.austin-hughes.com
User Manual
dedicated LCD display solutions
Designed and manufactured by Austin Hughes
NAP-K55
8mm Aluminum front bezel
AP-K55
55” 4K 3840 x 2160 LCD
Front NEMA4 / IP65
OP-K55
Universal Open Frame
DP-K55
Aluminum Front Panel
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Legal Information
First English printing, January 2018
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< Part. 5 >
Options
5.1 Option Table
5.2 3G / HD / SD-SDI Broadcast-grade input
5.3 MCS Multi-display control solution
5.4 Touchscreen : Infrared 10-point
5.5 DC Power : 24V / 48V / 125V
5.6 MIL-type or lockable connector
P.23
P.24
P.25
P.26
P.27
P.28
< Part. 4 >
Specifi cations / OSD / Remote Controller
4.1 Product Specifi cations
4.2 On-screen Display Operation ( OSD )
4.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP )
4.4 Remote Controller ( RC-2 )
P.15 - 16
P.17 - 19
P.20 - 21
P.22
< Part. 1 >
AP-K55 / NAP-K55
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & Installation
Contents
P. 1
P.2 - 3
P.4 - 5
< Part. 3 >
OP-K55
3.1 Package Content
3.2 Structure Diagram & Dimension
3.3 Mounting Hardware & Installation
P. 11
P.12 - 13
P.14
< Part. 2 >
DP-K55
2.1 Package Content
2.2 Structure Diagram & Dimension
2.3 Mounting Hardware & Installation
P. 6
P.7 - 8
P.9 - 10
UM-UV-621-K55-Q318V3 www.austin-hughes.com
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfi ber cloth fi rst, not directly on the parts you are cleaning.
3
4
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Basic I/O
HDMI 2.0HDMI 1.4 DP
Power
in out
Audio
< 1.1 > Package Content - AP / NAP-K55
P. 1
< Part 1 >
55" 4K LCD display X 1
6ft DP cable X 1
Power cord X 1
Remote controller X 1
Wall-mount bracket set X 1
AP-K55 / NAP-K55
55" 4K LCD Display
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Front view
1
2
3
Rear view
6
Rear case
LCD panel
8mm aluminum front bazel
Audio speaker, pair
LCD membrane
Wall-mount bracket
Remote sensor
1
2
3
4
5
5
6
4
< 1.2 > Structure Diagram - AP / NAP-K55
AP-K55
NAP-K55
P. 2
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
AP-K55
1295 x 89.3 x 776 mm
51 x 3.5 x 30.6 inch
1455 x 212 x 917 mm
57.3 x 8.3 x 36.1 inch
40 kg
88 lbs
50 kg
110 lbs
NAP-K55
1295 x 89.3 x 776 mm
51 x 3.5 x 30.6 inch
1455 x 212 x 917 mm
57.3 x 8.3 x 36.1 inch
45 kg
99 lbs
55 kg
121 lbs
Bottom view
7
7
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55" 4K LCD Display
P. 3
Side View
Rear View
< 1.2 > Dimension - AP / NAP-K55
AP-K55
NAP-K55
UNIT : mm
1mm = 0.03937 inch
Bottom View
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 1.3 > Wall-mount Installation - AP / NAP-K55
P. 4
Step
■ Install left & right front wall-mount brackets at
the rear side of the LCD shown above.
■ M5 screw x 8 pcs included ( Left & right side ).
1
Front wall-mount bracket
Rear side
Step
■ Install left & right rear wall-mount brackets on
the wall shown above.
■ 6 x M10 screws required ( Left & right side ).
M10 screw sets are not provided.
2
Rear wall-mount bracket
Wall
Step
■ Attach the LCD to the rear wall-mount brackets
on the wall.
3
Wall
Wall WallLCD
Installation Completed.
Step
4
■ No VESA mount provided for 46" and 55”
models. Only wall-mount available.
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55” 4K LCD Display
< 1.3 > VESA Installation - AP / NAP-K55
M8 screw
■ Hardware and M8*4 pcs for VESA mount are not provided
VESA mount ( 600*400mm )
P. 5
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Basic I/O
HDMI 2.0HDMI 1.4 DP
Power
in out
Audio
< 2.1 > Package Content - DP-K55
P. 6
< Part 2 >
55" 4K LCD display X 1
6ft DP cable X 1
Power cord X 1
Remote controller X 1
Wall-mount bracket set X 1
DP-K55
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55” 4K LCD Display
Front view
1
2
3
Rear view
6
Rear case
LCD panel
8mm aluminum front cover
Audio speaker, pair
LCD membrane
Wall-mount bracket
1
2
3
4
5
5
6
4
< 2.2 > Structure Diagram - DP-K55
DP-K55
P. 7
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
DP-K55
1269 x 83.1 x 750 mm
50 x 3.3 x 29.5 inch
1455 x 212 x 917 mm
57.3 x 8.3 x 36.1 inch
37 kg
81.4 lbs
47 kg
103.4 lbs
Bottom view
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55" 4K LCD Display
P. 8
Side View
Rear View
< 2.2 > Dimension - DP-K55
DP-K55
UNIT : mm
1mm = 0.03937 inch
Bottom View
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 2.3 > Wall-mount Installation - DP-K55
55” 4K LCD Display
P. 9
Step
■ Install left & right front wall-mount brackets at
the rear side of the LCD shown above.
■ M5 screw x 8 pcs included ( Left & right side ).
1
Front wall-mount bracket
Rear side
Step
■ Install left & right rear wall-mount brackets on
the wall shown above.
■ 6 x M10 screws required ( Left & right side ).
M10 screw sets are not provided.
2
Rear wall-mount bracket
Wall
Step
■ Attach the LCD to the rear wall-mount brackets
on the wall.
3
Wall
Wall WallLCD
Installation Completed.
Step
4
■ No VESA mount provided for 46" and 55”
models. Only wall-mount available.
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 2.3 > VESA Installation - DP-K55
M8 screw
■ Hardware and M8*4 pcs for VESA mount are not provided
VESA mount ( 600*400mm )
P.10
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Basic I/O
< 3.1 > Package Content - OP-K55
P. 11
< Part 3 >
OP-K55
55" 4K LCD display X 1
6ft DP cable X 1
Power cord X 1
Remote controller X 1
HDMI 2.0HDMI 1.4 DP
Power
in out
Audio
55" 4K LCD Display
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 3.2 > Structure Diagram - OP-K55
3
5
4
Front view
Rear view
Rear case
LCD panel
Universal open frame mounting
Audio speaker, pair
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
OP-K55
P.12
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
OP-K55
1292 x 81.3 x 773 mm
50.9 x 3.3 x 30.4 inch
1455 x 212 x 917 mm
57.3 x 8.3 x 36.1 inch
33 kg
72.6 lbs
43 kg
94.6 lbs
1
2
Bottom view
6
6
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55" 4K LCD Display
Side View
Rear View
< 3.2 > Dimension - OP-K55
OP-K55
UNIT : mm
1mm = 0.03937 inch
Bottom View
P.13
Front View
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 3.3 > Installation - OP-K55
P.14
( I ) Universal mount
( II ) VESA mount ( 600*400mm )
M8 screw
■ Hardware and M8*4 pcs for VESA mount are not provided
VESA mount ( 600*400mm )
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55" 4K LCD Display
< 4.1 > Product Specifi cations
P.15
< Part 4 >
Mechanical
Design
AP-K55 NAP-K55 DP-K55 OP-K55
Protection 8mm front bezel NEMA 4 / IP65 front cover open frame
Front Panel Black, RAL 9005 -
Rear Casing Black, RAL 9005
VESA Mounting 600 x 400 mm 600 x 400 mm 600 x 400 mm
Other Mounting Wall mount, 600 x 400 mm Universal mount
LCD
Panel
Panel Size ( diagonal )
55-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 3840 x 2160
Brightness ( typ. ) 450
Contrast Ratio ( typ. ) 1200 : 1
Color 1.07 Billion, 10-bit
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 12
Dot pitch ( mm ) 0.315
Display Area ( mm ) 1209.60H x 680.40V
Surface treatment Anti-glare
Surface hardness 2H
Backlight Type LED
MTBF ( hrs ) 30,000
Audio Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kΩ / 2.8V
Speaker Dual Stereo Speaker 10W x 2
*When the audio output is connected, speaker output is OFF
Power Power Supply Range Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Screen ON Max.100W
Power saving mode Max. 9W
Power button OFF Max. 2W
Video Digital Display port DP 1.2 / HDCP 1.3
HDMI HDMI 2.0 / HDCP 2.2
HDMI 1.4 / HDCP 1.4
Compliance EMC FCC & CE certifi ed
Safety CE / LVD certifi ed
Environment RoHS2 & REACH compliant
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 4.1 > Product Specifi cations
Applicable
Format
Display Port
Input
PC Signal 3840 x 2160 x 60Hz
1920 x 1080 x 60Hz
1600 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 768 x 60Hz
1024 x 768 x 60 / 70 / 75Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
Audio Signal 2ch Linear PCM
HDMI Input
HDMI 2.0 3840 x 2160 x 60Hz
HDMI 2.0 / 1.4
3840 x 2160 x 30Hz
1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to fi x the issue.
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
P.16
Physical
Specifi cation
AP-K55 / NAP-K55 DP-K55 OP-K55
Product
1295 x 89.3 x 776 mm 1269 x 83.1 x 750 mm
1292 x 81.3 x 773 mm
( W x D x H )
51 x 3.5 x 30.6 inch 50 x 3.3 x 29.5 inch 50.9 x 3.3 x 30.4 inch
Packing
1455 x 212 x 917 mm 1455 x 212 x 917 mm
1455 x 212 x 917 mm
( W x D x H )
57.3 x 8.3 x 36.1 inch 57.3 x 8.3 x 36.1 inch 57.3 x 8.3 x 36.1 inch
Net Weight 40 kg / 88 lb 45 kg / 99 lb 37 kg / 81.4 lb 33 kg / 72.6 lb
Gross Weight 50 kg / 110 lb 55 kg / 121 lb 47 kg / 103.4 lb 43 kg / 94.6 lb
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 4.2 > On-screen Display Operation ( OSD )
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
P.17
55” 4K LCD Display
< 4.2 > On-screen Display Operation ( OSD )
P.18
Picture
Brightness : Adjust the screen brightness
Contrast : Adjust the difference between the image background
( black level ) and the foreground ( white level )
Black level : Adjust background black level of the screen
Eco : Screen in power saving mode
1
Position
Picture size : Adjust the image size
- Full Screen / 4:3 / 5:4 / Pixel to Pixel
DP version : Select the DP version
2
Color
Color temperature : User / Warm / Cool / 5400k mode and
Red / Green / Blue color balance
Sharpness : Adjust the image from weak to sharp
Hue : Adjust the screen hue value
Saturation :
Adjust the saturation of the image color
Dynamic
luminous control : Control the dynamic brightness
3
OSD Set
Language : Select the language in which the OSD menu is
displayed - English
OSD H-Position : Align the screen image left or right
OSD V-Position : Align the screen image up or down
OSD time out :
Adjust the screen timeout
OSD transparency : Adjust the screen transparency
OSD size : Adjust the screen size - Normal / Small
OSD rotation : Rotate the screen - 90° / 180° / 270°
4
55” 4K LCD Display
Reset
Reset : Return the adjustment back to factory setting
< 4.2 > On-screen Display Operation ( OSD )
5
PIP
PIP mode : Enter into PIP / PBP setting - PIP MODE /
PBP 2WIN ( Main screen + 1 sub screen ) /
PBP 3WIN ( Main screen + 2 sub screen ) /
PBP 4WIN ( Main screen + 3 sub screen )
Select the signal input of each sub screen
PIP size : Adjust the size of the Sub screen
- Small / Medium / Large / Huge
PIP position : Adjust the position of the Sub screen
- Top Left / Top Right / Bottom Left / Bottom Right
Swap : Swap the input signal of PIP / PBP sub screen
6
MISC
Signal source : Select the signal source - DP / HDMI1 / HDMI2
Mute : Turn off the surrounding sound
Audio in : Auto / Line in / DP
Volume :
Adjust the volume of sound
Sleep mode :
Set the off time - 10 min / 20 min / 30 min /
50 min / 60 min / 120 min / 240 min
7
P.19
Options on Reset page
Rotation : Rotate the image in Full screen or 1:1
- 90° / 180° / 270°
Picture size : Adjust the image size in Full screen or 1:1
UM-UV-621-K55-Q318V3 www.austin-hughes.com
P.20
< 4.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP )
Mode
Display the Sub screen in the Main screen.
OSD Menu → MISC → PIP Mode → Large / Small / OFF
Sub screen
Main screen
Position
Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )
OSD Menu → MISC → PIP Position → top left / top right / bottom left / bottom right
top left top right
bottom left bottom right
Size
Adjust the size of the Sub screen ( Large / Small )
OSD Menu → MISC → PIP Mode → Large / Small
LCD Monitor Large Sub screen Small Sub screen
1920 x 1200 552 x 414 480 x 360
1920 x 1080 552 x 414 480 x 360
1440 x 900 414 x 310 360 x 270
1366 x 768 392 x 294 340 x 254
1280 x 1024 368 x 276 320 x 240
Size of Sub screen
< 4.3.1 > Picture in Picture ( PIP )
UM-UV-621-K55-Q318V3 www.austin-hughes.com
55” 4K LCD Display
Sub screenMain screen
P.21
Mode
Display the Sub screen next to the Main screen.
OSD Menu → MISC → PIP Mode → PBP
Size
LCD Monitor Main / Sub screen
1920 x 1200 955 x 716
1920 x 1080 955 x 716
1440 x 900 715 x 536
1366 x 768 678 x 508
1280 x 1024 635 x 476
< 4.3.2 > Picture By Picture ( PBP )
< 4.3.3 > PIP / PBP Source
To select an input signal for PIP / PBP Sub screen.
OSD Menu → MISC → PIP Source → HDMI / SDI
The PIP / PBP is operable in the following table :
Sub
Main
HDMI SDI
HDMI
xo
SDI
ox
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 4.4 > Remote Controller ( RC-2 )
P.22
1
2
3
4
5
6
AUTO
0
-/--
7
8 9
PIP
MENU SELECT
BACK
EXIT
SOURCE
POSITION
SWAP
PIP
AUDIO
ASPECT
SLEEP
PIP
ENTER
CH
FREEZE
MUTEINPUT
VOL
W
a
t
e
r
p
r
o
o
f
1
4
3
2
5
7
6
20
21
8
9
10
11
12
13
15
16
17
18
19
14
INPUT Select the source
Switches on or off the TV
0 - 9
Only use in TV mode. Select channels. For channel numbers 10
and above, enter the second digit within two seconds.
AUTO Auto adjust
MENU Display the menu on the screen or go to the previous menu
▲ / ▼ / ◄ / ► / ENTER
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
BACK Back to previous value
MUTE Turn on or off the speaker
Vol + / - Increase or decrease the speaker volume
CH + / - For TV model only, increase or decrease the channel number
FREEZE Reserve for OEM model
- / -- For setting input single or double digits
ASPECT Adjust the screen size
SELECT To select the existing item
SLEEP Select the sleeping time
EXIT Exit the menu or cancel
PIP functions
PIP
Picture in picture
PIP AUDIO To set the audio of in PIP mode
POSITION To set the screen position in PIP mode
SOURCE PIP Source
SWAP Swap screen in PIP mode
1
8
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Options AP / NAP DP OP
SDI
MCS multi-screen control
Touchscreen
MIL-type / lockable connector
DC Power
< 5.1 > Option Table
< Part 5 > Options
55” 4K LCD Display
P.23
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 5.2 > Options : 3G / HD / SD-SDI input
P.24
Power
SDI
in - out
Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with UltraView displays, a SDI input
module can support up to 1080p @60Hz resolution without
using additional space or power and it comes standard with a
2-year warranty.
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
HDMI 2.0HDMI 1.4 DP
in out
Audio
UM-UV-621-K55-Q318V3 www.austin-hughes.com
*** Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf
MCS
Link in out set
Power
For the 1st and last display,
push the set switch upward
Set switch
For other daisy chain displays,
push the set switch downward
LINK
OUT
IN OUT
RS-232C
Cat5 / 6 cable
max. 300 meters
up to 64 displaysDaisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
15 feet serial cable
( over 15 feet, extender required )
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various UltraView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and
the fi rst display via a 15 feet serial cable while the CAN bus is
used for the various LCD displays cascade together via CAT 5/6
cable, and daisy chain up to 1,000 meters.
Designed for use with UltraView LCD displays, Austin Hughes
provides a MCS input module without using additional space or
power and it comes standard with a 2-year warranty.
< 5.3 > Options : MCS
MCS
( Multi-display Control )
55” 4K LCD Display
P.25
HDMI 2.0HDMI 1.4 DP
in out
Audio
UM-UV-621-K55-Q318V3 www.austin-hughes.com
< 5.4 > Options : Touchscreen & driver
Model
K55-IR10 Multi-touch
Technology
Infrared
Touch Point
10
Input Type
Pen, Finger, Finger of gloved hand activation
Touch Point Accuracy
± 2 mm
Response Speed
≤ 15 ms
Activation Force
No minimum touch activation force
Touch Durability
Unlimited
Glass Thickness
3 mm
Connector
A-type USB
Operating System
Windows 7 / Windows 10
K55" USB Touchscreen Specifi cation
P.26
■ Dimension will be changed if Multi-touch required
■ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
K55-IR10 Driver
USB Touchscreen
Power
HDMI 2.0HDMI 1.4 DP
in out
Audio
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Model 24V 48V 125V
Input rating
Input voltage: 24-Volt 48-Volt 110-Volt
Input range: 18 ~ 36V 36 ~ 75V 43 ~ 160V
Input current
- No load 100 mA 50 mA 10 mA
- Full load 7386 mA 3611 mA 1540 mA
Output rating
Output voltage: 24-Volt 24-Volt 24-Volt
Output current: 6.25A 6.25A 6.25A
Effi ciency 88% 90% 89%
< 5.5 > Options : DC Power
P.27
( 1 ) If the unit with LCD, earthing may be required
For DC power option :
***
55” 4K LCD Display
UM-UV-621-K55-Q318V3 www.austin-hughes.com
Input Part no. MIL Standard
MIL - type
Connector
DC Power ***
( Male )
MS3470W8-33P MIL - DTL - 26482
VGA ***
( Male )
MS3470W14-15P MIL - DTL - 26482
Input Part no. Standard
Lockable
Connector
DC Power
( Male )
YM-Ext-461CP001 D-type 3W3
USB LUSB - A111 - 00 -
< 5.6 > Options : MIL-type or Lockable Connector
*** There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design fl exibility possible. For more information, please contact us.
*** MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
P.28
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2018 Austin Hughes Electronics Ltd. All rights reserved.
Loading...