User Manual
33U Door Mount Basic Fan Panel
F-33.9
Cabinet Cooling Solution
www.austin-hughes.comUM-IC-Basic-33U-Q215V1
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam
age to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam
aged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invali
date its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.austin-hughes.comUM-IC-Basic-33U-Q215V1
F-33.9 Door mount Fan Panel is typically installed on the outside of a cabinet’s rear perforated door to improve extraction of heat from high density cabinet.
The unit can be attached to most 42U or taller cabinets. If aisle is relatively narrow for exterior mounting, the
unit may be installed on the inside of the perforated door. For details, please refer to the model table below :
Front Door
Cool Air In
Model Installation Airfl ow Purpose
F-33.9A
F-33.9B
Rear door outside Extract airfl ow Exhaust air out from cabinet
Front door inside Intake airfl ow Cool air in from aisle
Front door outside Intake airfl ow Cool air in from aisle
Rear door inside Extract airfl ow Exhaust air out from cabinet
Rear Door
Hot Air Out
Unpacking
The equipment comes with the standard parts shown on the package contents. Check and make sure they are included and in good
condition. If anything is missing, or damage, contact the supplier immediately.
Package Content
- 33U door mount fan panel x 1 pc
- 6 ft power cord x 1 pc
- User Manual x 1 pc
- Mounting screw x 6 pcs ( attached with the unit )
- Air blocking material x 1 pc
Optional mounting kit
Hanging bracket kit
Part no. : F-HBK
- Hanging bracket x 2 pcs
- M4*6mm screw with nut x 4 sets
- M4*10mm screw x 2 pcs
* For installation, please
refer to p.4
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.1
Caution - Power off the fans if the door is to be opened for maintenence or service of
items within the cabinet. The fans have fi nger guards but care must be excerised when working
around spinning fans. Keep hair, fi ngers and other small objects away from the spinning blades.
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.2
Installation steps
The weight of the unit is less than 5kg, so in most cases, holes in perforated cabinet doors can be used to mount the unit.
Lift the unit to the desired position.
1
Place attached 6 screws then through the door and tighten them.
2
To eliminate bypass air to maximize heat removal from the cabinet, cut the air blocking material to the size necessary with cutter or
3
scissors then apply the material to the inside surface of the door with screws or adhesive backing. Ensure all open perforations are
covered by the material.
Connect the power cord to the PDU of the cabinet through the cable entry hole on the rear top of the cabinet.
4
If no cable entry on the top, the unit may be installed on the inside but the model need to be changed. Please refer to P.1 .
5
Use cable clip to hold the
power cord if necessary
Power
cord
Mounting
screws
Cable
clip
ON / OFF
Button
Perforated
Cabinet Door
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.3
Hanging bracket installation
Assemble & adjust the hanging bracket with M4*6mm screw & nut, to fi t the thickness of the door.
1
Install the hanging bracket kit on the rear side of the fan panel with M4*10mm screw.
2
Hang the unit on the door.
3
Place attached 4 screws then through the door and tighten them.
4
Follow steps - on P.3 .
5
3 5
Cable
clip
Power
cord
Hanging bracket with
M4*6mm screw & nut
M4*10mm
screws
ON / OFF
Button
Mounting
screws
Perforated
Cabinet Door
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.4
Dimensions
F-33.9
195
1466
38.4
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.5
Specifi cations
Fan F-33.9
No. of Fans : 9
Individual Fan CFM : 108 CFM
Unit CFM ( approx. ) : 972 CFM
MTBF : 50,000 hrs
Environmental
Operating : 0 to 50°C Degree
Storage : -5 to 60°C Degree
Relative humidity : 5~90%, non-condensing
Shock : 50G peak acceleration ( 11ms, half-sine wave )
Vibration : 58~100Hz / 0.98G ( 11ms / cycle )
Weight
Net / Gross : 4.6 kgs ( 10.1 lbs ) / 6.9 kgs ( 15.2 lbs )
Casing Color :
Mounting :
Black
33U door mount
Power
Input : Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord
Consumption : 60W
Dimensions
Product : 195 x 38.4 x 1466 mm / 7.7 x 1.5 x 57.7 inch
Packing : 263 x 106 x 1650 mm / 10.4 x 4.2 x 65.0 inch
Regulatory :
Environmental :
RoHS2 & REACH compliant
FCC, CE
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for
any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.
www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.6
Loading...